GJB 150.3A高温试验方法的应用及分析

介绍了GJB150．3A高温试验方法的由来以及与GJB150．3之间的联系和区别。重点对该方法中试验项目的剪裁、试验程序的选择、试验条件的确定以及试验顺序的安排进行了分析,并以某型直升机机栽天线为例,详细说明了该试验方法的应用,最后就其未来发展趋势进行了探讨。     

五孔支撑纤维膜在MBR运行中的特性研究

实验室自行研发的PVDF/PMMA/TPU共混体系的五孔支撑膜具有高强度耐冲击的特点,在一定程度上改善了传统中空纤维膜的断丝情况。将选择典型的、具有代表性的MBR工艺流程,采用自主研发的五孔膜制成帘式组件,用于处理经水解酸化后的印染废水。实验讨论了水力停留时间,曝气强度和污泥浓度对于出水水质的影响,最后确定最优的操作条件为:MBR的水力停留时间为20 h,曝气强度为2.45 m/m.h,污泥浓度为4 500 mg/L。     

Factors affecting the direct mineralization of CO2 with olivine

Olivine, one of the most abundant minerals existing in nature, is explored as a CO2 carbonation agent for direct carbonation of CO2 in flue gas. Olivine based CO2 capture is thermodynamically favorable and can form a stable carbonate for long-term storage. Experimental results have shown that water vapor plays an important role in improving CO2 carbonation rate and capacities. Other operation conditions including reaction temperature, initial CO2 concentration, residence time corresponding to the flow rate of CO2 gas stream, and water vapor concentration also considerably affect the performance of the technology.     

提高煤层气采收率的CO2埋存技术

作为常规油气重要接替补充的非常规天然气,煤层气越来越受到世人的关注.如何提高煤层气采收率是摆在煤层气开发工程师面前迫切需要解决的技术难题.通过向煤层中注入CO2,既可以提高煤层气采收率又能间接地实现CO2减排,即提高煤层气采收率的CO2埋存技术(CO2-ECBM).该项技术已在世界各地迅速发展,并取得一些实质性进展.文...     

探讨分析影响水样中总磷保存期的因素

水样中的总磷,在现场已酸化至pHi2的前提下,规定的保存期也只有24h,实际工作中,受中途运输、送检样品数量等因素影响,在样品采集后,监测人员常常无法确保能在保存期内及时完成监测工作,针对这一情况,笔者采用总磷标准分析方法《钼酸铵分光光度法》GB／T11893—1989,通过用一系列比对试验,发现保存温度、采样容器等对水样中的总磷保存期有一定的影响,在适当的条件下,某些水样可以延长保存期。     

Efficient dechlorination of chlorinated solvent pollutants under UV irradiation by using the synthesized TiO2 nano-sheets in aqueous phase

Titanium dioxide(TiO2), which is the widely used photo-catalyst, has been synthesized by simple hydrothermal solution containing tetrabutyl titanate and hydrofluoric acid. The synthesized product has been applied to photo-degradation in aqueous phase of chlorinated solvents, namely tetrachloroethene(PCE), trichloroethene(TCE) and 1,1,1-trichloroethane(TCA). The photo-degradation results revealed that the degradation of these harmful chemicals was better in UV/synthesized TiO2 system compared to UV/commercial P25 system and UV only system. The photo-catalytic efficiency of the synthesized TiO2 was 1.4, 1.8 and 3.0 folds higher compared to the commercial P25 for TCA, TCE and PCE degradation, respectively. Moreover, using nitrobenzene(NB) as a probe of hydroxyl radical(.OH), the degradation rate was better over UV/synthesized TiO2, suggesting the high concentration of.OH generated in UV/synthesized TiO2system. In addition,.OH concentration was confirmed by the strong peak displayed in EPR analysis over UV/synthesized TiO2system. The characterization result using XRD and TEM showed that the synthesized TiO2 was in anatase form and consisted of well-defined sheet-shaped structures having a rectangular outline with a thickness of 4 nm, side length of 50 nm and width of 33 nm and a surface 90.3 m2/g. XPS analysis revealed that ≡Ti-F bond was formed on the surface of the synthesized TiO2. The above results on both photocatalytic activity and the surface analysis demonstrated the good applicability of the synthesized TiO2 nano-sheets for the remediation of chlorinated solvent contaminated groundwater.     

Dyes adsorption using a synthetic carboxymethyl cellulose-acrylic acid adsorbent

Removal of noxious dyes is gaining public and technological attention. Herein grafting polymerization was employed to produce a novel adsorbent using acrylic acid and carboxymethyl cellulose for dye removal. Scanning electron microscopy and Fourier-transform infrared spectroscopy verified the adsorbent formed under optimized reaction conditions. The removal ratio of adsorbent to Methyl Orange, Disperse Blue 2BLN and malachite green chloride reached to 84.2%, 79.6% and 99.9%, respectively. The greater agreement between the calculated and experimental results suggested that pseudo second-order kinetic model better represents the kinetic adsorption data. Equilibrium adsorptions of dyes were better explained by the Temkin isotherm. The results implied that this new cellulose-based absorbent had the universaiity for removal of dyes through the chemical adsorption mechanism.     

高絮凝活性酿酒酵母菌株筛选及其培养条件研究

从实验室保藏菌种中筛选到1株具有高絮凝活性的酿酒酵母(Saccharomyces cerevisiae)菌株,利用其发酵液进行絮凝实验,结果表明:该絮凝剂对4 g/L、pH为7的高岭土悬浊液有很好的絮凝效果;该菌株产絮凝剂的最佳培养条件:碳源为葡萄糖,氮源为蛋白胨,培养温度为30℃,初始pH值为5.5,液体震荡培养96 h后絮凝率最高可达92.6%。     

半纤维素降解菌J-16的筛选及产酶特性研究

从腐烂竹子表面采集样品经初筛、复筛获得1株半纤维素高效降解菌。采用半纤维素平板水解圈法和胞外酶测定法进行菌株筛选,利用培养特征形态学生理生化特征和分子生物学方法进行菌株鉴定,并对产酶特性和酶学性质进行了研究。结果表明,该菌株初步鉴定为类芽胞杆菌属细菌,命名为Paenibacillus sp.J-16,最适碳源和氮源分别为麸皮(20 g/L)和豆粕(15 g/L),在初始pH值为6.5,装液量为50 mL,32℃条件下180 r/min培养60 h,酶活性达到192.6 U/mL。该菌株的获得为采用生物法降解半纤维素的研究与应用提供了实践依据。     

二氧化硫还原法处理含铬废水最佳工艺条件研究

试验采用自主研发设计的二氧化硫还原连续反应处理高浓度含铬废水的工艺,研究了二氧化硫还原反应时不同pH值、反应时间、反应温度和硫磺投料量对含铬废水中六价铬污染物的治理效果。结果表明:当二氧化硫还原反应条件控制在pH值为2~4、反应温度为40~60℃、硫磺投料量为理论反应所需投料量的1.2倍、反应时间为40min时,可使高浓度含铬废水中的六价铬得到有效去除。