餐饮废油均相法制取生物柴油研究进展

阐述了餐饮废油(WCO)制备生物柴油的均相催化方法,介绍了餐饮废油生物柴油的特性和排放性能,并展望了生物柴油生产的发展趋势.     

近场脉冲地震下考虑模型不确定性的桥梁时变抗震分析

为了研究近场脉冲地震下桥梁结构的时变抗震性能,以一座常规连续梁桥为研究对象,引入氯离子侵蚀模型,在考虑多种不确定性因素基础上,采用拉丁超立方抽样建立不同服役时期的时变模型样本,运用增量动力分析方法,从能力、需求以及倒塌等方面对算例桥梁的时变抗震性能进行了研究和评价。结果表明:近场脉冲型地震下结构的抗震需求明显大于远场地震;氯离子侵蚀导致钢筋锈蚀后力学性能发生改变,箍筋对核心混凝土约束能力减弱,锈蚀纵筋屈服强度及极限拉应变都降低,导致桥墩的变形能力下降;与地面运动的不确定性相比,模型参数的不确定性对结构的抗震需求均值及离散性影响均不大;随着服役时间延长,钢筋锈蚀加剧,桥墩出现倒塌破坏的概率加大。     

废旧线路板中主要有价金属的生物反应器浸出研究

为探讨可供实际生物浸出应用的反应器规模废旧线路板中有价金属浸出特性和工艺条件,通过设计序批式生物浸出反应器,采用分离到的氧化亚铁硫杆菌Z1作为菌种资源,在考察废旧线路板中有价金属的浸出特性的基础上,确定了反应器运行的最佳工艺条件.结果表明,反应器运行的最佳工艺条件为曝气量1L/min、停留时间30h、搅拌速率300r/min以及粉末投加量12g/L.在此条件下,经过101h可以浸出90.24%的铜.同时,经197h的浸出,可以溶出93.06%的镁、92.00%的锌、85.59%的铝和64.51%的镍.因此,生物浸出反应器能有效回收废旧线路板中的有价金属,为该技术的实际应用提供了实验证据.     

Antimony smelting process generating solid wastes and dust：Characterization and leaching behaviors

A large amount of solid waste has been produced by the antimony smelting process in the＂World Capital of Antimony＂, Xikuangshan area in China. This study comprehensively investigated the physical and chemical characteristics of the various solid wastes, as well as the leaching behavior of the solid wastes, which included water-quenched slag,arsenic-alkali residue, desulfurized slag and blast furnace dust. These four types of waste were enriched in a variety of heavy metals and metalloids and more specifically with As and Sb levels up to 8.6 × 104 and 3.16 × 105mg/kg, respectively, in arsenic-alkali residue. For desulfurized slag and water-quenched slag, the leaching concentration of Sb significantly exceeded the acceptable limits during the leaching tests using the toxicity characteristic leaching procedure and the synthetic precipitation leaching procedure. In addition, As leaching in arsenic-alkali residue was extraordinarily hazardous, being three orders of magnitude higher than the regulatory level of As. According to the results of the extraction tests, all the tested wastes were classified as hazardous waste.     

Arsenic removal from groundwater by acclimated sludge under autohydrogenotrophic conditions

Arsenic in the environment is attracting increasing attention due to its chronic health effects. Although arsenite(As(III)) is generally more mobile and more toxic than arsenate(As(V)), reducing As(V) to As(III) may still be a means for decontamination, because As(III) can be removed from solution by precipitation with sulfide or by adsorption or complexation with other metal sulfides. The performance of As(V) bio-reduction under autohydrogenotrophic conditions was investigated with batch experiments. The results showed that As(V) reduction was a biochemical process while both acclimated sludge and hydrogen were essential. Most of the reduced arsenic remained in a soluble form, although 20% was removed with no addition of sulfate, while 82% was removed when sulfate was reduced to sulfide. The results demonstrated that the reduced arsenic was re-sequestered in the precipitates, probably as arsenic sulfides. Kinetic analysis showed that pseudo first-order kinetics described the bio-reduction process better than pseudo second-order. In particular, the influences of pH and temperature on As(V) reduction by acclimated sludge under autohydrogenotrophic conditions and total soluble As removal were examined. The reduction process was highly sensitive to both pH and temperature, with the optimum ranges of pH 6.5–7.0 and 30–40°C respectively. Furthermore, Arrhenius modeling results for the temperature effect indicated that the As(V) reduction trend was systematic. Total soluble As removal was consistent with the trend of As(V) reduction.     

金河石墨创新、节能两不误

石墨,以其耐高温、高强度、导电性能强的性质,被广泛应用于工业领域。随着我国冶金、化工、机械、医疗器械、核能、汽车、航空航天等行业的快速发展,这些行业对石墨及碳素制品的需求将会不断增长,中国石墨及碳素制品行业将保持快速增长。根据《中国石墨及碳素制品行业发展前景与投资战略规划分析报告前瞻》数据,2006—2011年,中国石墨及碳素制品行业销售收入年复合增长率为36．56％。     

锂电池正极材料Li2FeS2的充放电机理与热稳定性

随着移动电子设备的飞速发展,锂电池作为新型的能源载体也取得了巨大的进步。与嵌入式氧化物正极材料相比,Li2FeS2不仅具有理想的循环性能,而且其理论容量达到400mAh／g,约为嵌入式氧化物正极材料的2倍。因此,本文从晶体结构、电化学性能、充放电机制、充放电过程中的离子电导率变化以及热稳定性等方面对Li2FeS2正极材料进行了详细的阐述。     

微波及其组合工艺强化污泥厌氧消化研究

为提高剩余污泥的厌氧消化效能和脱水性能,考察了微波及其组合污泥预处理工艺的强化污泥厌氧消化效果,同时考察了预处理-厌氧消化过程的污泥理化特征及其脱水性能.结果表明,微波及其组合工艺可以强化污泥厌氧消化产甲烷,其中微波-过氧化氢-碱(0.2)的强化效果最为显著,不仅30 d累计产甲烷量比对照组增加了13.34%,而且产甲烷速率也得到了提升.与单独微波处理相比,过氧化氢、碱的投加显著提高了溶解性COD的释放量,这表明微波、过氧化氢、碱之间的协同作用能有效破碎污泥,进而强化厌氧消化效果;微波-酸预处理后的污泥具有良好的脱水性能,毛细吸水时间(CST)只有9.85 s,污泥脱水性能的改善与其表面电性、粒径分布的变化密切相关;不同预处理条件下的污泥经过厌氧消化后,污泥脱水性能较为接近.     

基于代谢产物调控的活性污泥沉淀性能控制原理研究

通过对不同沉降性能活性污泥的胞外聚合物(EPS)进行荧光特性分析,探讨了荧光强度峰值、荧光区域积分等参数与污泥沉降性能的关系.研究表明,典型波长下荧光强度峰值与污泥沉降性能之间有很好关联性,据此,建立了微生物典型代谢产物与沉淀性能的调控曲线即活性污泥的安全操作线与微生物代谢状态曲线,确立了活性污泥沉淀性能调控区域即高代谢产物区可获得良好的固液分离效果.研究成果从微生物代谢的角度揭示了絮体结构的调控方法,具有重要的理论意义.     

基于功能仿真的电子产品性能退化分析方法

目的研究基于功能仿真对电子产品长期工作过程中性能退化问题进行分析的方法。方法以DC-DC电源模块为对象,一种方式是直接对电源模块进行加速退化试验,并基于试验数据进行可靠性分析;另一种方式是对电源模块中性能退化关键元器件进行加速退化试验,并将试验数据模型注入到电源模块功能仿真模型中,进行性能退化仿真与可靠性分析,最终对两种分析结果进行对比,验证仿真分析技术的有效性。结果对比显示,加速退化试验分析得到的电源模块平均寿命为281 560 h,仿真分析得到的电源模块平均寿命为357 290 h。结论由于仿真分析方法只考虑了性能退化的关键元器件,结果偏乐观,但是偏差在合理的范围内,证明该方法对于性能退化可靠性分析是有效的,并且应用该方法更便于进行设计改进和迭代分析。