盘管式冰蓄冷器释冷过程实验研究

提出一种应用于相变蓄冷冷却系统的盘管式蓄冰装置,实验研究了不同翅密度的蓄器在不同制冷剂温度下的释冷特性。结果表明:蓄冷器在释冷过程中,蓄冷盘管轴向温差大,且换热量随时间有明显的初始阶段和稳定阶段。对于固定翅密度的蓄冷器,制冷剂入口温度对换热影响较大,入口温度越高,初始阶段和稳定阶段的换热量均较高。对于固定的制冷剂入口温度,蓄冷器的释冷特性受翅密度影响较小。     

Evaluation of accuracy of linear regression models in predicting urban stormwater discharge characteristics

Stormwater runoff has been identified as a source of pollution for the environment, especially for receiving waters. In order to quantify and manage the impacts of stormwater runoff on the environment, predictive models and mathematical models have been developed. Predictive tools such as regression models have been widely used to predict stormwater discharge characteristics. Storm event characteristics, such as antecedent dry days （ADD）, have been related to response variables, such as pollutant loads and concentrations. However it has been a controversial issue among many studies to consider ADD as an important variable in predicting stormwater discharge characteristics. In this study, we examined the accuracy of general linear regression models in predicting discharge characteristics of roadway runoff. A total of 17 storm events were monitored in two highway segments, located in Gwangju, Korea. Data from the monitoring were used to calibrate United States Environmental Protection Agency＇s Storm Water Management Model （SWMM）. The calibrated SWMM was simulated for 55 storm events, and the results of total suspended solid （TSS） discharge loads and event mean concentrations （EMC） were extracted. From these data, linear regression models were developed. R2 and p-values of the regression of ADD for both TSS loads and EMCs were investigated. Results showed that pollutant loads were better predicted than pollutant EMC in the multiple regression models. Regression may not provide the true effect of site-specific characteristics, due to uncertainty in the data.     

Antimony smelting process generating solid wastes and dust：Characterization and leaching behaviors

A large amount of solid waste has been produced by the antimony smelting process in the＂World Capital of Antimony＂, Xikuangshan area in China. This study comprehensively investigated the physical and chemical characteristics of the various solid wastes, as well as the leaching behavior of the solid wastes, which included water-quenched slag,arsenic-alkali residue, desulfurized slag and blast furnace dust. These four types of waste were enriched in a variety of heavy metals and metalloids and more specifically with As and Sb levels up to 8.6 × 104 and 3.16 × 105mg/kg, respectively, in arsenic-alkali residue. For desulfurized slag and water-quenched slag, the leaching concentration of Sb significantly exceeded the acceptable limits during the leaching tests using the toxicity characteristic leaching procedure and the synthetic precipitation leaching procedure. In addition, As leaching in arsenic-alkali residue was extraordinarily hazardous, being three orders of magnitude higher than the regulatory level of As. According to the results of the extraction tests, all the tested wastes were classified as hazardous waste.     

Origin of major ions in monthly rainfall events at the Bamenda Highlands, North West Cameroon

Rainwater characteristics can reveal emissions from various anthropogenic and natural sources into the atmosphere. The physico-chemical characteristics of 44 monthly rainfall events （collected between January and December 2012） from 4 weather stations （Bamenda, Ndop plain, Ndawara and Kumbo） in the Bamenda Highlands （BH） were investigated. The purpose was to determine the sources of chemical species, their seasonal inputs and suitability of the rainwater for drinking. The mean pH of 5 indicated the slightly acidic nature of the rainwater. Average total dissolved solids （TDS） were low （6.7 mg/L）, characteristic of unpolluted atmospheric moisture/air. Major ion concentrations （mg/L） were low and in the order K＋ 〉 Ca2＋ 〉 Mg2~ 〉 Na＋ for cations and NO3 〉〉 HCO3 〉 SO] 〉 CI- 〉 PO3- 〉 F- for anions. The average rainwater in the area was mixed Ca-Mg-SO4-CI water type. The CI-/Na＋ ratio （1.04） was comparable to that of seawater （1.16）, an indication that N a＋ and CI originated mainly from marine （Atlantic Ocean） aerosols. High enrichments of Ca2＋, Mg2＋ and SO2- to Na＋ ratios relative to seawater ratios （constituting 44% of the total ions） demonstrated their terrigenous origin, mainly from Saharan and Sahelian arid dusts. The K＋/Na＋ ratio （2.24）, which was similar to tropical vegetation ash （2.38）, and NO3 was essentially from biomass burning. Light （〈 100 mm） pre-monsoon and post-monsoon convective rains were enriched in major ions than the heavy （〉 100 mm） monsoon rains, indicating a high contribution of major ions during the low convective showers. Despite the acidic nature, the TDS and major ion concentrations classified the rainwater as potable based on the WHO guidelines.     

凹凸棒石纤维复合气凝胶吸附水体中TPH吸附特性

以水体中总石油烃(total petroleum hydrocarbons,TPH)为目标污染物,采用凹凸棒石复合二氧化硅气凝胶进行净化石油类污染水体研究,主要考察复合气凝胶使用量及环境要素对去除水体中TPH的影响。研究结果表明:凹凸棒石纤维复合气凝胶与污染水体的质量比为1:60,对TPH的去除率随温度的升高而降低,受pH变化影响较小;当NaCl浓度在0~100 g/L,MgCl2浓度在0~2.5 g/L时,复合气凝胶对水体中TPH的去除率几乎不受盐度的影响;Fe3+、Mn2+、NH4+、NO3-均能促进复合气凝胶对TPH的去除,但受其浓度变化影响较小,同时,凹凸棒石纤维复合气凝胶对上述离子也有微弱的去除作用。研究成果为凹凸棒石复合气凝胶在实际石油类污染水体中的应用提供了科学可靠的数据支撑。     

钴胁迫下红苋菜中钴积累分布及其生理特性的研究

采用模拟钴污染土壤的方法,研究不同程度的钴(0、20、40、60 mg/kg)胁迫对成熟期红苋菜生长及其体内钴积累分布和生理特性的影响。结果表明:(1)同一钴胁迫下,红苋菜株高差异性大,株高差值(最高与最矮的差值)范围为14~27 cm,远大于对照组的4 cm;(2)在不同程度的钴胁迫下,植株各部位钴含量分布规律不一致,且根部钴含量最高。当胁迫浓度为60 mg/kg,植株长势最差组的根、茎、叶部钴含量最高,分别为对照组的41、44和14倍,此时地上部和单株的钴积累量均最大,分别为1 103和1 275μg,且两者的积累量与MDA含量成极显著正相关;(3)钴胁迫使得叶片叶绿素含量、CAT和POD酶活性均出现不同程度的降低,SOD酶活性仅在低浓度的钴胁迫下上升,而MDA含量则上升;(4)钴胁迫下植株对钴的转运系数为0.20~0.64,地上富集系数为1.96~10.06,同一胁迫下,长势最差组的转运系数和地上富集系数最大。     

翼形上进风长袋脉冲袋式除尘器气流特性研究

袋式除尘器对超细颗粒物的净化效果较好,增加袋长是提高过滤面积的有效方法,但随滤袋加长,气流均匀性变差,滤袋容易破损,局部积灰严重,滤袋不能得到充分的利用。文章对翼形上进风长袋脉冲袋式除尘器建立几何模型并进行网格划分,基于计算流体动力学(CFD)理论,选取过滤速度为0.5~1.3 m/min和压力出口为-350~-2 000 Pa为边界条件,采用压力-速度耦合的SIMPLE算法,模拟包含Φ130 mm和Φ150 mm,长10 m滤袋的翼形上进风长袋脉冲袋式除尘器的气流分布,考察气流在滤袋空间分布的均匀性。结果表明:翼形上进风方式使得长袋脉冲袋式除尘器内气流分布较均匀;通过Φ150滤袋的气流速度大于Φ130;靠近壁面的滤袋的气流速度大于相应中心滤袋的。该研究可为上进风袋式除尘器的优化设计提供指导和依据。     

喹啉为单一燃料在填料型MFC的产电特性研究

多环芳烃是我国近岸海域水体和沉积物中需要优先控制的首位有机污染物,喹啉是典型的含氮杂环芳烃,具有较大的毒性、致畸性和潜在的致癌作用。该研究利用填料型MFC对单一喹啉为燃料的产电性能进行了研究。经过6个月利用喹啉和葡萄糖作混合燃料的驯化,MFC中的阳极群落发生了改变,可以利用单一喹啉进行产电,以200 mg/L喹啉为燃料时的最大体积功率密度为2.7 W/m3。在没有外加葡萄糖可能带来的协同共代谢作用下,利用单一喹啉做燃料时,对喹啉在MFC中的降解途径进行了研究。实验结果表明,以喹啉为燃料时,MFC可以在不利用有机物本身作为电子受体的作用下,通过外电路的电子传递完成电子从阳极到阴极的传递而达到相同的目的。     

再生水中5种抗生素抗性菌的紫外线灭活及复活特性研究

抗生素抗性菌作为再生水中的新兴污染物而受到广泛关注.为探明紫外线对抗生素抗性菌的灭活和消毒后抗性菌的复活潜能,研究了以城市污水为水源的再生水(简称"再生水")中青霉素抗性菌、氨苄青霉素抗性菌、头孢氨苄抗性菌、氯霉素抗性菌和利福平抗性菌的紫外线灭活特性,并考察了再生水中的抗生素抗性菌在黑暗条件下的复活潜能.结果表明,20mJ·cm-2紫外线消毒剂量下,实际再生水中青霉素抗性菌、氨苄青霉素抗性菌、头孢氨苄抗性菌和氯霉素抗性菌的灭活率均高于4-log,与总异养菌群灭活率相当,而利福平抗性菌的灭活率(3.7-log)略低于总异养菌群.紫外线消毒后,再生水静置22 h后,抗生素抗性菌普遍出现复活现象,当紫外线消毒剂量为常规剂量20 mJ·cm-2时,消毒后再生水中的抗生素抗性菌菌落形成能力高达3-log.因此,常规的紫外线消毒剂量不能有效控制再生水储存或运输过程中抗生素抗性菌的复活.     

SFBR中好氧颗粒污泥的培养及特性研究

接种自行培养的活性污泥,以模拟废水为基质,采用连续进水、间歇出水及厌氧/好氧交替的运行模式,尝试了在SFBR中进行好氧颗粒污泥的培养,并研究了好氧颗粒污泥的特性及反应器对污染物的去除效果.结果表明,通过逐步缩短沉降时间,28 d时成功培养出好氧颗粒污泥,所形成的好氧颗粒污泥呈黄色、形状不规则,且粒径较小(平均粒径0.56 mm),正常情况下的SVI保持在70 mL·g-1以下,EPS在59 d时达到最大值(以MLVSS计)373.24 mg·g-1,较培养初期增加了约2.5倍,运行后期由于颗粒出现解体,导致EPS急剧下降;反应器在运行过程中未能保持较高的污泥量,中后期MLSS始终在3 000mg·L-1以下;在63 d的运行时间里,除异常波动外,反应器对COD的去除率基本维持在90%左右,正常情况下出水COD小于100 mg·L-1,反应器对NH+4-N、TIN的去除效果波动较大,去除率分别为44.45%~94.72%及43.87%~93.13%,反应器对TP的去除率在44.50%~97.40%之间,正常情况下TP去除率可维持在60%以上;限于自动控制水平,夜间长时间的好氧饥饿期容易造成丝状菌过度生长,使得AGS在生长竞争中处于劣势,最终导致了AGS的解体.