加压气浮法处理含油废水中溶气压力对出水水质的影响与应用研究

以实际工作中的含油废水为研究对象,采用加压气浮处理工艺,通过多年的实际应用与对监测数据的分析,总结出气浮压力对气浮处理效果的影响,通过对溶气罐压力的调整,可得到最佳的出水水质。该项研究结果操作方便、处理效率高、易于控制、对今后的工作具有指导意义,有很好的推广价值。     

La-Co-Fe-Cu/HZSM-5在尾气碳颗粒燃烧中的催化性能

采用柠檬酸络合低温浸渍法制备分子筛负载钙钛矿型复合氧化物催化剂。采用XRD、SEM和H2-TPR等手段对催化剂性能进行表征,并在微型固定床反应器中对催化剂进行活性评价。结果表明,在钙钛矿型复合氧化物中进行B位离子掺杂,可以改善催化活性,碳颗粒燃烧温度降低。在20%LaCoO3/HZSM-5催化剂中用铁离子部分取代钴离子可以改善碳颗粒的燃烧性能,取代量增加碳颗粒燃烧温度降低,但是生成CO2的选择性也降低,以20%LaCo0.2Fe0.8O3/HZSM-5为催化剂,Tig、Tm和Tf分别为256℃、399℃和403℃,但生成CO2的选择性只有72.5%。在20%LaCo1-xFexO3/HZSM-5中的钙钛矿型复合氧化物B位离子中加入铜离子后,在碳颗粒燃烧反应中生成CO2的选择性得到明显改善,Sco2提高10个单位以上。以20%LaCo0.2Fe0.6Cu0.2O3/HZSM-5为催化剂,在碳颗粒燃烧反应中生成CO2的选择性可以达到94.7%,Tig、Tm和Tf分别为242℃、427℃和445℃。     

Cu-K型低温碳烟氧化催化剂的合成及表征

柴油机排放中碳烟的低温氧化是近年来研究的热点.通过原位合成法制备Cu2K/Al2O3和CuK／Al2O3两种碳烟氧化催化剂,并采用低温氮吸附/脱附实验、X射线衍射、X射线光电子能谱、程序升温氧化对其结构进行系统表征,并用U碳模拟柴油机碳烟,研究其催化活性,评测其对柴油机排气中碳烟颗粒的净化效果.研究表明,Cu2K/Al...     

基于生态系统的水环境压力分区指标体系构建

为了科学合理的完成水环境压力分区,构建水环境压力分区指标体系是其关键和基础.鉴于水环境压力涉及因素的系统性.相互联系性,从生态系统的角度考虑选取水环境压力分区指标十分必要;由于水环境压力涉及方面的相互联系性,其表征指标之间往往存在信息量的重叠,为了避免信息的重复表达,减少不必要的工作量,同时避免冗余指标带来的干扰,需对...     

供碳源载体及其在低碳氮比污水处理中的应用研究

为解决低C/N污水的脱氮问题,本实验自行研制开发了一种新型碳聚合物载体.对该载体进行低C/N污水的生物膜脱氮研究,考察了HRT、pH、DO、温度等因素对系统同步硝化反硝化脱氮效果的影响.结果表明:在C/N比为4、pH=8、DO=1 mg/L、HRT=6 h,T=24℃的条件下,氨氮及总氮的去除率分别可以达到90%和70...     

Pd/activated carbon sorbents for mid-temperature capture of mercury from coal-derived fuel gas

Higher concentrations of Hg can be emitted from coal pyrolysis or gasification than from coal combustion, especially elemental Hg. Highly efficient Hg removal technology from coal-derived fuel gas is thus of great importance. Based on the very excellent Hg removal ability of Pd and the high adsorption abilities of activated carbon（AC） for H2 S and Hg, a series of Pd/AC sorbents was prepared by using pore volume impregnation, and their performance in capturing Hg and H2 S from coal-derived fuel gas was investigated using a laboratory-scale fixed-bed reactor. The effects of loading amount, reaction temperature and reaction atmosphere on Hg removal from coal-derived fuel gas were studied. The sorbents were characterized by N2 adsorption, X-ray diffraction（XRD） and X-ray photoelectron spectroscopy（XPS）. The results indicated that the efficiency of Hg removal increased with the increasing of Pd loading amount, but the effective utilization rate of the active component Pd decreased significantly at the same time. High temperature had a negative influence on the Hg removal. The efficiency of Hg removal in the N2-H2S-H2-CO-Hg atmosphere（simulated coal gas） was higher than that in N2-H2S-Hg and N2-Hg atmospheres, which showed that H2 and CO, with their reducing capacity, could benefit promote the removal of Hg. The XPS results suggested that there were two different ways of capturing Hg over sorbents in N2-H2S-Hg and N2-Hg atmospheres.     

Aerobic granules cultivated and operated in continuous-flow bioreactor under particle-size selective pressure

A novel method based on the selective pressure of particle size （particle-size cultivation method, PSCM） was developed for the cultivation and operation of aerobic granular sludge in a continuous-flow reactor, and compared with the conventional method based on the selective pressure of settling velocity （settling-velocity cultivation method, SVCM）. Results indicated that aerobic granules could be cultivated in continuous operation mode by this developed method within 14 days. Although in the granulation process, under particle-size selective pressure, mixed liquor suspended solids （MLSS） in the reactor fluctuated greatly and filamentous bacteria dominated the sludge system during the initial operation days, no obvious difference in profile was found between the aerobic granules cultivated by PSCM and SVCM. Moreover, aerobic granules cultivated by PSCM presented larger diameter, lower water content and higher specific rates of nitrification, denitrifieation and phosphorus removal, but lower settling velocity. Under long term operation of more than 30 days, aerobic granules in the continuous-flow reactor could remain stable and obtain good chemical oxygen demand （COD）, NH4^＋-N, total nitrogen （TN） and total phosphorus （TP） removal. The results indicate that PSCM was dependent on the cultivation and maintenance of the stability of aerobic granules in continuous-flow bioreactors.     

怎样变信息为企业治污压力

污染控制的障碍到底是什么？这不只是一个技术问题或者资金问题．最核心的问题还是缺乏动力。这个动力原本应该源自严格的执法。源自司法介入的环境诉讼,但是我国现在还不具备这些。从国际经验看,环境保护需要广泛的社会参与,除了政府监管,包括立法、司法、环保行政部门的作为．还有市场手段和公众参与。在西方国家,司法手段可以起到非常重要的作用。而我国环境司法系统还需要进一步完善,这会是一个相当艰难和漫长的过程。     

上海市夏冬两季PM_(2.5)中碳组分污染特征及来源解析

2009年7月和2010年1月在上海市华东理工大学采样点采集PM2.5样品,应用热/光碳分析仪对样品中的有机碳(OC)和元素碳(EC)进行了测定,并计算得到了二次有机碳(SOC)、char-EC和soot-EC的质量浓度。结果显示:采样期间PM2.5、OC、EC、SOC、char-EC、soot-EC夏季平均浓度分别为(58.87±20.04)、(11.37±4.12)、(3.68±1.27)、(4.37±2.86)、(3.00±1.24)和(0.68±0.30)μg/m3;冬季平均浓度分别为(142.31±45.47)、(16.01±4.43)、(5.53±2.36)、(5.67±2.92)、(5.11±2.35)和(0.42±0.17)μg/m3,除soot-EC外,均呈现夏季低、冬季高的特点。在不同空气质量下,OC、EC和char-EC的质量浓度具有明显差异,且三者均与能见度、平均风速呈显著负相关。夏冬两季soot-EC、char-EC、SOC和POC占TC的百分含量相差不大,其中POC/TC值最高,soot-EC/TC值最低。夏季SOC/TC的比值高于冬季,可能由于气温高有利于发生光化学反应。对8个碳组分进行主成分分析,结果显示,燃煤、生物质燃烧、汽油和柴油车排放对PM2.5中碳组分的贡献显著,并且可能受燃煤和汽油车排放的影响最大。     

铁碳微电解法预处理聚氯乙烯(PVC)离心母液废水

采用铁碳微电解法对聚氯乙烯(PVC)离心母液废水进行预处理。分别考察反应时间、铁粉投加量、Fe/C(质量比)、pH值及曝气速率对母液废水中的COD和聚乙烯醇(PVA)去除率的影响,并在此基础上通过正交实验确定了废水COD的最佳处理条件。结果表明,最佳处理条件为:反应时间为4 h、铁粉投加量为30 g/L、Fe/C为1:2、pH值为2、曝气速率为0.8 L/min。在该条件下,废水中COD、PVA和TOC的平均去除率分别为(67%±2)%、(98%±1)%和(55%±3)%,废水的BOD/COD值从0.3提高到0.5,可生化性得到了显著提高。同时,废水中的NH3-N、浊度也在很大程度上得到了去除,出水中总铁含量也很低。