短波长X射线衍射技术及在环境工程中的应用展望

介绍了短波长特征X射线衍射无损检测分析原理和方法,无损地测定了预拉伸铝板、高强钢孔挤压件、铝合金搅拌摩擦焊接件等材料部件的内部残余应力、内部物相、内部织构及其分布,并分析讨论了测试结果。该仪器具有体积小,投资少、使用维护方便等优势,展望了该无损检测分析技术在装备环境工程中的应用前景。     

La3+掺杂对吸附相反应制备TiO2复合催化剂的结晶过程及弱紫外光下活性的影响

利用吸附相反应技术制备弱紫外光响应的高效催化剂,并通过XRD、XPS以及HRTEM探索了不同焙烧温度下La3+掺杂量对TiO2结晶过程的影响.结合弱紫外光下甲基橙的降解反应,深入研究催化剂结晶过程的变化对弱紫外光下催化剂活性的影响.结果表明,La3+掺杂会抑制TiO2的结晶过程.当焙烧温度或者掺杂量较低时,La3+不能进入TiO2的晶格结构但会轻微地抑制TiO2的结晶过程;未进入晶格结构的La3+存在会引入光生载流子的浅能级捕获中心,在弱光体系中极大提升了催化剂的活性.当La3+的掺杂量为0.05%(原子分数)时,经过900℃焙烧后催化剂降解能力最高,其活性超过商用P25的2倍多.在较高La3+掺杂量(超过0.20%)时,900℃焙烧后一定量La3+进入TiO2的晶格结构而大大抑制了TiO2结晶;这种强烈的抑制作用使得催化剂中存在大量无定形结构TiO2,无定形TiO2甚至多于700℃焙烧后的催化剂,反而大大抑制了弱光体系中催化剂活性.     

Photocatalytic activity of TiO2 containing anatase nanoparticles and rutile nanoflower structure consisting of nanorods

A series of TiO2 with different crystal phases and morphologies was synthesized via a facile hydrothermal process using titanium nbutoxide and concentrated hydrochloric acid as raw materials. The photocatalytic activity of the samples was evaluated by degradation of Methyl Orange in aqueous solution under UV-Visible light irradiation. On the basis of detailed analysis of the characterizing results of high-resolution transmission electron microscopy, X-ray powder diffraction measurements, X-ray photoelectron spectroscopy and Brunauer-Emmett-Teller measurement, it was concluded that the photo-activity of the catalyst is related directly to the 3D morphology and the crystal phase composition. An excellent catalyst should have both a futile 3D flower-like structure and anatase granulous particles. The 3D flower-like structure could enhance light harvesting, as well as the transfer of reactant molecules from bulk solution to the reactive sites on TiO2. In addition, the optimum anatase/rutile phase ratio was found to be 80：20, which is beneficial to the effective separation of the photogenerated electron-hole pairs.     

SPE-UFLC-MS/MS法测定制药废水中四环素类抗生素

文章建立了利用固相萃取-超快速液相色谱-串联质谱(SPE-UFLC-MS/MS)测定制药废水中四环素类抗生素(土霉素、四环素和金霉素)残留的方法。水样经(30%硫酸锌+20%亚铁氰化钾)溶液作为沉淀剂沉淀蛋白质后,上清液采用Oasis HLB固相萃取柱富集和净化,以(0.1%甲酸溶液+乙腈)为流动相进行梯度洗脱,经Agilent ZORBAX SB C18柱分离后,在串联质谱ES(I+)模式下进行MRM检测。该方法四环素类抗生素检出限(S/N=3时)0.02μg/L,3种目标物在0.010¹.0 mg/L范围内线性关系良好,线性相关系数在0.998 21.0 mg/L范围内线性关系良好,线性相关系数在0.998 2⁰.999 8之间。在0.20、0.40和0.60μg/L添加水平,各组分的回收率在80.8%0.999 8之间。在0.20、0.40和0.60μg/L添加水平,各组分的回收率在80.8%⁹7.2%之间,相对标准偏差在5.31%97.2%之间,相对标准偏差在5.31%⁹.92%之间。该方法可满足制药废水中四环素类抗生素残留检测的要求。     

固相萃取-红外分光光度法测定水中的总油

建立了固相萃取(SPE)-红外分光光度测定水中总油的方法,并对固相萃取条件进行了优化,实验表明,对于1L添加2mg标准油的水样,其总油的回收率为86%-93%,多次重复实验测定的相对标准偏差为2.9%(n=6)。     

两相厌氧工艺处理制漆废水的研究

运用两相厌氧工艺处理制漆工业废水.结果表明,废水在两相厌氧系统中HRT越长,COD及甲苯、二甲苯等有毒有机物质降解越好,从处理工艺的高效性和经济上考虑,产酸相最佳的HRT应为20 h.运用两相厌氧系统处理制漆废水是高效可行的.     

LNAPL在砂质含水层中动态迁移的电阻率法监测试验研究

在海滨潮间带采集细砂,通过室内柴油泄漏模拟试验,利用自制电阻率监测系统对轻非水相液体在砂土-地下水系统垂向渗透过程进行电阻率变化动态监测;通过配制不同含油率砂土测定其静态电阻率变化规律,探讨电阻率变化的影响因素;最后取样分析测定污染含水介质稳定后含水率及含油率,对监测结果有效性进行了验证;并利用显微成像法对污染砂土进行了微观形态分析.结果表明,柴油污染砂土微观形态上胶结现象明显;柴油渗透海滨砂土过程电阻率大小同含水饱和度,比电阻率和含油饱和度之间存在良好的相关性,均可用Archie公式拟合,n值分别为2.36和0.15;通过电阻率测定可以有效估算柴油透镜体厚度;电阻率随深度的变化可以反映含油率和含水率的垂向分布.本研究为轻质油品储罐或者海上油品输运过程泄露造成的海滨砂土地下污染扩散过程监测及机制研究提供了一种有效的方法,也可为其他典型石油泄漏污染场地的电阻率法探测或监测提供参考.     

Development of analytical methods for polycyclic aromatic hydrocarbons （PAHs） in airborne particulates： A review

In the present work, the different sample collection, pretreatment and analytical methods for polycyclic aromatic hydrocarbons （PAHs） in airborne particulates is systematacially reviewed, and the applications of these pretreatment and analytical methods for PAHs are compared in detail. Some comments on the future expectation are also presented.     

TiO2 nanotubes as solid-phase extraction adsorbent for the determination of polycyclic aromatic hydrocarbons in environmental water samples

An analytical method based on TiO2 nanotubes solid-phase extraction (SPE) combined with gas chromatography (GC) was established for the analysis of seven polycyclic aromatic hydrocarbons (PAHs): acenaphtylene, acenaphthene, anthracene, fluorene, phenanthrene, fluoranthene and pyrene. Factors a ecting the extraction e ciency including the eluent type and its volume, adsorbent amount, sample volume, sample pH and sample flow rate were optimized. The characteristic data of analytical performance were determined to investigate the sensitivity and precision of the method. Under the optimized extraction conditions, the method showed good linearity in the range of 0.01–0.8 g/mL, repeatability of the extraction (RSD were between 6.7% and 13.5%, n = 5) and satisfactory detection limits (0.017–0.059 ng/mL). The developed method was successfully applied to the analysis of surface water (tap, river and dam) samples. The recoveries of PAHs spiked in environmental water samples ranged from 90% to 100%. All the results indicated the potential application of titanate nanotubes as solid-phase extraction adsorbents to pre-treat water samples.     

餐饮废油均相法制取生物柴油研究进展

阐述了餐饮废油(WCO)制备生物柴油的均相催化方法,介绍了餐饮废油生物柴油的特性和排放性能,并展望了生物柴油生产的发展趋势.