Preparation of InYO3 catalyst and its application in photodegradation of molasses fermentation wastewater

An InYO3 photocatalyst was prepared through a precipitation method and used for the degradation of molasses fermentation wastewater. The InYO3 photocatalyst characterized by X-ray diffraction (XRD), UV-Vis diffuse reflectance spectroscopy, surface area and porosimetry. Energy band structures and density of states were achieved using the Cambridge Serial Total Energy package (CASTEP). The results indicated that the photodegradation of molasses fermentation wastewater was significantly enhanced in the presence of InYO3 when compared with PbWO4. The calcination temperature was found to have a significant effect on the photocatalytic activity of InYO3. Specifically, InYO3 calcined at 700°C had a considerably larger surface area and lower reflectance intensity and showed higher photocatalytic activity. The mathematical simulation results indicated that InYO3 is a direct band gap semiconductor, and its conduction band is composed of In 5p and Y 4d orbitals, whereas its valence band is composed of O 2p and In 5s orbitals.     

Biodegradation of beet molasses vinasse by a mixed culture of micro organisms: Effect of aeration conditions and pH control

Upon aeration, the mixed microbial SCD ProBio OriginalTM culture may be used as the first stage in a two- or multi-stage system for the biodegradation of beet molasses vinasse.     

催化臭氧氧化降解糖蜜酒精废水的研究

以SnO2为催化剂,研究糖蜜酒精废水在臭氧条件下的氧化降解反应,为糖蜜酒精废水的治理提供一种新的处理方法.研究表明,SnO2加速了臭氧氧化反应,使糖蜜酒精废水的氧化降解加快.影响糖蜜酒精废水氧化降解的主要因素有臭氧流量、废水的初始pH和催化剂用量等.加大臭氧流量及增加催化剂用量,均有利于糖蜜酒精废水的降解.适宜的反应条件是:糖蜜酒精废水的稀释倍数为10倍,臭氧流量为130 mg/h,催化剂用量为2.500 g/L,废水的初始pH为4.25,温度为30 ℃.在该条件下反应60 min,废水的脱色率为60.2%,COD去除率为44.5%.动力学分析表明,单独臭氧氧化降解糖蜜酒精废水和SnO2催化臭氧氧化降解糖蜜酒精废水均为拟一级反应.     

类Fenton试剂对糖蜜酒精废水的正交试验研究

利用正交法设计实验,研究了类Fenton试剂对糖蜜酒精废水深度处理的效果。研究结果表明,类Fenton试剂深度处理糖蜜酒精废水的最优工艺参数,废液初始pH值为6.0,FeCl3.6H2O的加入量为3mL、3%H2O2的加入量为2mL、搅拌时间为5min,在此条件下,COD和色度的去除率分别为77.28%和90.35%。对COD去除率最主要的因素为FeCl3.6H2O的加入量,而对色度去除率最主要的因素为废液初始pH值。