Non-UV based germicidal activity of metal-doped TiO2 coating on solid surfaces

A stain-based screening method was developed to screen different catalyst coatings for their germicidal activity. A Baclight dead/live bacteria viability kit （invitrogen, molecular probes） was used for staining the cell. The screening was carried out following a standard procedure. This included loading cell suspension to solid surface and maintaining contact for 30 min, then staining with a mixture containing dyes. The stained cells were observed using an epifluorescent microscope and photographed with a CCD camera under UV. Metal-doped TiO2 coatings on AI plates were prepared and tested for non-UV germicidal activity without using UV. It was tested using model microorganisms such as Bakers Yeast （Saccharomyces cerevisiae）, Bacillus subtilis, Pseudomonas putida, and Escherichia coli. On the basis of the germicidal activity of catalyst and the degree of damage caused to the cells, the stained cells may appear green （viable）, green with red or yellow nuclei and yellow （compromised） or red （nonviable）. According to their stained color, cells were counted to calculate the percentage of dead, live, and compromised cells. Compromised cells are cells that grow very slowly after reculturing indicating a degree of reversible cell damage. Screening the germicidal activity using this staining method is accurate and efficient, and requires less time than the culture-based method. A modification to the procedure for measuring germicidal activity of rough surfaces or fibrous coatings was developed. Both TiO2 and metal-doped TiO2 （Ag, Pt, Au, Cu） possess non-UV based germicidal activity. The germicidal activity of TiO2 was found to be related with its wetting property and can be improved by UV irradiation before testing. It is not greatly affected by contact time, indicating a fast acting germicidal activity.     

双水相气浮浮选光度法处理环境水样中痕量土霉素残留物

建立了一种新型分离方法--双水相气浮浮选光度法,使其处理环境水样中痕量土霉紊(OTC)残留物,研究了其工作原理,并用高效液相色谱法对该方法的可靠性进行了验证.利用自制的双水相气浮浮选装置,选择四氢呋喃作亲水有机溶剂、质量分数为10%的NaCl溶液作分相剂,NaOH溶液调节pH,将Cu2+与OTC形成的疏水配合物浮选至有机相,实现OTC与水样分离.浮选完毕后,经紫外-可见分光光度法分析,线性回归方程为A=1.532×105c+0.1230(其中:A为有机相的吸光度;c为水样的OTC摩尔浓度,mol/L),相关系数为0.9998,该方法的线性范围为4.8×10-7～7.3×10-5 mol/L,OTC加标回收率为99.5%～100.1%.     

紫外线消毒技术用于污水处理的现状与发展前景

污水处理中紫外消毒方法与传统消毒方法相比之下具有不需要投加化学药剂、不产生有毒有害副产物、消毒效率高、操作简单、便于运行管理等特点。本文着重介绍了目前用于消毒的紫外灯的种类,并阐述了浊度、微生物种类、光复活性能等影响紫外消毒效果的因素,最后对未来紫外消毒方法发展的前景做出了分析。     

紫外光度法测定地表水中石油类的油标选择

精选了一种新油标。采用这种油标,可使紫外分光光度法测地表水中石油类的令人满意,省工省时。     

紫外分光光度法直接测定水中酚

通过实验证明,用紫外分光光度法测定水中挥发酚,方法简便、精密度和准确度较好,适用于地表水、地下水和废水中挥发酚的测定,结果令人满意。     

紫外分光光度法在水中阴离子表面活性剂标准样品研制中的应用

研究了阴离子表面活性剂水溶液的紫外吸收特性,并将研究结果用于阴离子表面活性剂水质标样的稳定性,均匀性和定值工作,简化了操作手续,获得了准确的分析结果。     

水和废水中黄磷的测定

试验了黄磷在紫外光区的吸收光谱,建立了紫外分光光度法测定水和废水中黄磷的方法.该方法不需酸化、氧化,可在萃取后直接比色测定.当样品中含有石油类干扰物质时,可用含氧化剂的酸性水溶液对萃取液进行反萃取即能将其排除.该方法灵敏,具有测定范围宽、准确度高、精密度好、操作简便等特点.     

紫外分光光度法测定土壤中的硝态氮

用紫外分光光度法测定土壤中的硝态氮,经对900余份种樾农作物的土样进行分析及质控实验,结果证明该法操作简便,测定范围宽,其准确度和精密度均符合环境监测要求。     

紫外分光光度法测定水中总氮影响条件的实验研究

碱性过硫酸钾氧化-紫外分光光度法测定水中总氮时,实验的准确性受到很多条件的影响。本文分别从试剂的选择、试剂的配制、消解的温度与时间、实验用水、比色管的选用及清洁度等方面进行研究,从而保证实验的准确性与可靠性。     

退浆废水中聚乙烯醇的分析检测研究

建立了紫外可见分光光度法检测退浆废水中聚乙烯醇(PVA)含量的方法。以硼酸为介质,碘化钾—碘溶液为显色剂,检测波长为680 nm,测定退浆废水中PVA含量的线性方程为Y=0.018 8X+0.003 2,相关系数R2=0.999 3,平均加标回收率为97.6%;方法精密度(RSD=1.5%)、重现性(RSD=1.8%)均较好。该方法操作简单、准确度高、测定快速,适用于测定退浆废水中PVA的含量。