杭州湾海底输油管道防水体污染措施的探讨

1杭州湾海底输油管道及其海域基本情况杭州湾位于浙江省北部、上海市南部,东有舟山群岛,西有钱塘江注入,海底敷设有3条平行且相距50m的φ711mm、φ762mm、φ273mm管道,输送进口原油和石脑油。海底管道由慈溪新浦镇半掘浦下海,至平湖全塘镇白沙湾上岸,每条长55.6km。北岸(白沙湾)5km地形起伏较大,中段45km地势平坦,最高点在南岸海塘前沿,     

Resistance and biosorption mechanism of silver ions by Bacillus cereus biomass

Biosorption of silver ions onto Bacillus cereus biomass was investigated. Overall kinetic experiments were performed for the determination of the necessary contact time for the attainment of equilibrium. It was found that the overall biosorption process was best described by pseudo second-order kinetic model. The crystals detected by scanning electron microscope and X-ray photoelectron spectroscopy suggested the precipitation was a possible mechanism of biosorption. The molecular genetics of silver resistance of B. cereus biomass was also detected and illustrated by a whole cell sensor tool.     

生活垃圾焚烧飞灰制陶瓷砖表征

为了探索生活垃圾焚烧飞灰资源化利用途径,在对飞灰化学组成及矿物成分分析的基础上,利用飞灰、黄陶土、耐火砂及长石研制陶瓷砖,最佳配比方案为:飞灰20%,黄陶土60%,长石10%,耐火砂10%,分析了最佳配比制品的吸水率、抗压强度、微观结构及水平振荡浸出毒性。结果表明:飞灰属SiO2-Al2O3-金属氧化物体系,主要矿物成分是钙硅酸盐及铝硅酸盐等,可用于制陶瓷砖;最佳配比制品达MU15强度等级,满足抗风化的要求;随煅烧温度的升高,制品结构不断密实化,960℃烧成的制品显示出完全烧结的特点,960~1 000℃烧成的制品中出现明显的晶化、玻璃化过程。最佳配比制品重金属浸出毒性完全达标,重金属的浸出率与坯体相比大大降低。     

积累与突变

经过30年的模仿、跟踪和追赶,我国科学进入比较活跃的创新阶段,并开始向自主创新过渡。2010年我国发明专利申请量超过39万件,居世界第二位;科研论文数量也已跃居全球第二。     

使用量和单位常见错误浅析

以《量和单位》（GB3100—3102-1993）为依据,列举了各种常见的错误使用量和单位的名称和符号、量和单位非标准化的例子,对其进行了分析和探讨,提出标准化对策。     

污水处理厂产泥量与进水水质关系的研究

为研究阜阳污水处理厂近几年来污泥产量与进水水质之间的关系,对自2007年1月份以来的产泥量与进水水质的基础数据进行了整理．并通过建立各个数据之间的相互关系图表来分析产泥量与进水水质之间的关系。     

废旧线路板中主要有价金属的生物反应器浸出研究

为探讨可供实际生物浸出应用的反应器规模废旧线路板中有价金属浸出特性和工艺条件,通过设计序批式生物浸出反应器,采用分离到的氧化亚铁硫杆菌Z1作为菌种资源,在考察废旧线路板中有价金属的浸出特性的基础上,确定了反应器运行的最佳工艺条件.结果表明,反应器运行的最佳工艺条件为曝气量1L/min、停留时间30h、搅拌速率300r/min以及粉末投加量12g/L.在此条件下,经过101h可以浸出90.24%的铜.同时,经197h的浸出,可以溶出93.06%的镁、92.00%的锌、85.59%的铝和64.51%的镍.因此,生物浸出反应器能有效回收废旧线路板中的有价金属,为该技术的实际应用提供了实验证据.     

自适应模糊方法在烟气脱硝喷氨量控制系统中的应用

SCR烟气脱硝系统中喷氨量是一个重要的控制参数,它不仅影响了脱硝效率,过量时,还会产生二次污染,危及下游设备。电厂运行中,锅炉负荷不断变动,传统PID很难实现喷氨量的最佳控制。应用自适应模糊控制策略对喷氨量进行了控制,并对控制系统进行了仿真试验。结果表明:相对于传统的PID控制器,尿素溶液流量自适应模糊控制器的性能更佳,系统的动态响应较快且超调极小,即满足了工艺要求又降低了能耗。     

上海市郊区河道底泥重金属污染状况评价

河道底泥重金属污染日益受到重视。对上海市郊区河道毛家塘底泥进行监测,分析了13种重金属元素(As,Cd,Cr,Cu,Ni,Pb,Zn,Hg,Be,Ag,Sb,Se,Ti)的含量特征,采用地累积指数法、潜在生态危害指数法、污染负荷指数法对重金属污染状况进行了评价。结果表明:河道底泥13种重金属中,Ag,Sb,Se,Ti 4种低于检测限,As,Cd,Cr,Cu,Ni,Pb,Zn,Hg,Be含量均超过了上海市土壤背景值;底泥重金属为中污染,As,Cd,Cu,Zn污染影响较大。除As以外,其余重金属含量均满足我国现行标准或指标要求,建议底泥后续处理利用参考达标标准的相应要求进行。     

Antimony smelting process generating solid wastes and dust：Characterization and leaching behaviors

A large amount of solid waste has been produced by the antimony smelting process in the＂World Capital of Antimony＂, Xikuangshan area in China. This study comprehensively investigated the physical and chemical characteristics of the various solid wastes, as well as the leaching behavior of the solid wastes, which included water-quenched slag,arsenic-alkali residue, desulfurized slag and blast furnace dust. These four types of waste were enriched in a variety of heavy metals and metalloids and more specifically with As and Sb levels up to 8.6 × 104 and 3.16 × 105mg/kg, respectively, in arsenic-alkali residue. For desulfurized slag and water-quenched slag, the leaching concentration of Sb significantly exceeded the acceptable limits during the leaching tests using the toxicity characteristic leaching procedure and the synthetic precipitation leaching procedure. In addition, As leaching in arsenic-alkali residue was extraordinarily hazardous, being three orders of magnitude higher than the regulatory level of As. According to the results of the extraction tests, all the tested wastes were classified as hazardous waste.