利用沉积色素恢复湖泊古紫外强度研究综述

自从南极臭氧空洞被发现以来,平流层臭氧浓度下降导致到达地表的紫外辐射增强的现象引起了人们的广泛关注,目前这一状况还在不断加剧并将在未来很长一段时间里持续下去。为了更好地理解这种现象在长时间尺度上的意义以及合理预测未来地球表面紫外环境的变化以及生态系统的响应过程,科学家开始尝试恢复历史时期地球表面紫外辐射的变化。Scytonemin是蓝绿藻细胞外鞘上的一种抗UV色素,高UV强度照射能够促使细胞合成更多的这种色素以保护细胞免受紫外辐射的伤害,并且这种色素在湖泊沉积物中能够很好地保存。因此,我们可以通过分析不同时间段蓝绿藻细胞的scytonemin含量来反映历史时期湖泊紫外环境的变化。进一步的研究可以推测造成这种变化的原因以及生态系统对这些过程的响应,为预测未来地表紫外环境的变化及生态系统的响应提供合适的理论和证据。     

固相萃取-红外分光光度法测定水中的总油

建立了固相萃取(SPE)-红外分光光度测定水中总油的方法,并对固相萃取条件进行了优化,实验表明,对于1L添加2mg标准油的水样,其总油的回收率为86%-93%,多次重复实验测定的相对标准偏差为2.9%(n=6)。     

红外系统对点源目标作用距离的优化计算

作用距离是红外系统核心性能指标之一,受大气、背景等多方面因素的影响。针对传统作用距离计算方法存在的局限,综合考虑多个影响因素,提出了一种优化计算方法,首次精确计算了作用距离与实际距离之差的大气衰减值,并对计算方法进行了验证。结果表明,优化计算方法具有较好的计算精度,可用于红外系统性能预测和整体设计。     

ε-聚赖氨酸生产废菌体对六价铬吸附影响的研究

以ε-聚赖氨酸(ε-PL)发酵生产废菌体小白链霉菌(Streptomyces albulus)PD-1为研究对象,探讨了其对吸附Cr(Ⅵ)的影响.实验过程中,对预处理方式、pH、初始Cr(Ⅵ)浓度、吸附时间和温度等因素进行了考察.结果表明,HCl预处理的菌体具有较好的吸附能力,Cr(Ⅵ)的吸附增加率达到22.7%,最佳pH为2.0左右,温度对Cr(Ⅵ)的吸附影响不大.实验过程中分别采取Langmuir和Freundlich 2种吸附等温模型对实验数据进行了拟合,得到2个模型的线性相关系数R2分别为0.979 4和0.979 8,这表明吸附过程中既存在单层吸附同时也存在复杂的多层吸附,小白链霉菌对Cr(Ⅵ)的最大理论吸附量为23.92mg.g-1.通过傅里叶变换红外光谱分析,酰胺基和羟基等基团在吸附过程中起主要作用.     

ASTAR IR-200红外三波数测油仪自校方法

针对ASTAR IR-200红外三波数测油仪,提出仪器的自校方法。     

地表UV-B辐射增强对土壤-冬小麦系统呼吸速率和N2O排放的影响

通过室外盆栽实验,用静态箱-气相色谱法测定土壤-冬小麦系统的呼吸速率和N₂O排放通量,研究了UV-B辐射增强20%对土壤-冬小麦系统的呼吸速率和N₂O排放的影响.结果表明,相同的气象条件和田间管理下,UV-B辐射增强处理对呼吸速率和N₂O排放的季节变化模式无明显影响.在返青期,UV-B辐射增强显著降低了土壤-冬小麦系统的呼吸速率,但对N₂O的排放通量没有产生显著影响;在拔节孕穗期,UV-B辐射增强处理显著降低了土壤-冬小麦系统的呼吸速率和N₂O的排放通量;在抽穗-成熟期,UV-B辐射增强处理对土壤-冬小麦系统的呼吸速率和N₂O的排放没有显著影响.返青-齐穗期,UV-B增强处理显著降低土壤-冬小麦系统的N₂O累积排放量;但从齐穗开始至小麦成熟,UV-B增强处理对土壤-冬小麦系统的N₂O累积排放量没有显著影响.     

UV-B增强对稻田呼吸速率、CH4和N2O排放的影响

于水稻生长季进行室外盆栽试验,人工模拟UV-B辐射增强20%,采用静态箱-气相色谱法测定稻田生态系统的呼吸速率、CH4和N2O排放通量,研究UV-B辐射增强对稻田生态系统呼吸速率、CH4和N2O排放通量的影响.结果表明,UV-B辐射增强没有改变稻田呼吸速率、CH4和N2O排放通量的季节变化规律;与对照相比,平均呼吸速率...     

温室条件下UV-B辐射对蓝藻结皮生长和超微结构的影响

UV-B辐射是野外蓝藻结皮经常面临的一种环境胁迫因子.报道了温室条件下UV-B辐射对蓝藻结皮形态、生理和超微结构特征的影响.在本研究中,首先通过接种具鞘微鞘藻和爪哇伪枝藻形成初始蓝藻结皮,接着以初始蓝藻结皮为材料进行3种辐射处理:光合有效辐射、UV-B辐射+光合有效辐射和N-乙酰半胱氨酸+UV-B辐射+光合有效辐射.在...     

Removal of phosphate by Fe-coordinated amino-functionalized 3D mesoporous silicates hybrid materials

Phosphate removal from aqueous waste streams is an important approach to control the eutrophication downstream bodies of water. A Fe(III) coordinated amino-functionalized silicate adsorbent for phosphate adsorption was synthesized by a post-grafting and metal cation incorporation process. The surface structure of the adsorbent was characterized by X-ray di raction, N2 adsoropion/desoprotion technique, and Fourier transform infrared spectroscopy. The experimental results showed that the adsorption equilibrium data were well fitted to the Langmuir equation. The maximum adsorption capacity of the modified silicate material was 51.8 mg/g. The kinetic data from the adsorption of phosphate were fitted to pseudo second-order model. The phosphate adsorption was highly pH dependent and the relatively high removal of phosphate fell within the pH range 3.0–6.0. The coexistence of other anions in solutions has an adverse e ect on phosphate adsorption; a decrease in adsorption capacity followed the order of exogenous anions: F?? > SO2?? 4 > NO??3 > Cl??. In addition, the adsorbed phosphate could be desorbed by NaOH solutions. This silicate adsorbent with a large adsorption capacity and relatively high selectivity could be utilized for the removal of phosphate from aqueous waste streams or in aquatic environment.     

Potential particulate pollution derived from UV-induced degradation of odorous dimethyl sulfide

UV-induced degradation of odorous dimethyl sulfide (DMS) was carried out in a static White cell chamber with UV irradiation. The combination of in situ Fourier transform infrared (FT-IR) spectrometer, gas chromatograph-mass spectrometer (GC-MS), wide-range particle spectrometer (WPS) technique, filter sampling and ion chromatographic (IC) analysis was used to monitor the gaseous and potential particulate products. During 240 min of UV irradiation, the degradation e ciency of DMS attained 20.9%, and partially oxidized sulfur-containing gaseous products, such as sulfur dioxide (SO2), carbonyl sulfide (OCS), dimethyl sulfoxide (DMSO), dimethyl sulfone (DMSO2) and dimethyl disulfide (DMDS) were identified by in situ FT-IR and GC-MS analysis, respectively. Accompanying with the oxidation of DMS, suspended particles were directly detected to be formed by WPS techniques. These particles were measured mainly in the size range of accumulation mode, and increased their count median diameter throughout the whole removal process. IC analysis of the filter samples revealed that methanesulfonic acid (MSA), sulfuric acid (H2SO4) and other unidentified chemicals accounted for the major non-refractory compositions of these particles. Based on products analysis and possible intermediates formed, the degradation pathways of DMS were proposed as the combination of the O(1D)- and the OH- initiated oxidation mechanisms. A plausible formation mechanism of the suspended particles was also analyzed. It is concluded that UV-induced degradation of odorous DMS is potentially a source of particulate pollutants in the atmosphere.