乙二醇分批精馏塔的工艺设计

采用变参数操作法分批蒸馏回收乙二醇（EG）是对传统分批蒸馏法工艺技术的改进和创新,以新设计理念设计的精馏塔具有操作灵活、投资少、节能、适用性强等优点。新塔运行实践表明：与旧塔相比,其处理量大,可达6000 t/a;产品质量高,可达99.9%;乙二醇损耗低：12.5Kg/tEG;每年可多创产值102万元,经济效益显著。     

稀释度参数法在恶臭环境影响评价预测中的初探

创建一种可直接依据“臭气浓度”源强、较易预测操作的“稀释度参数法”,对目前在恶臭环境影响评价预测中普遍采用的“臭气强度法”及“类比法”进行补充。以具体案例对“稀释度参数法”预测结果与现状监测结果进行对比,经对比分析,“稀释度参数法”可客观反映现实情况。     

构建湿地系统水力学参数的设计模型研究

构建湿地污水处理系统的水力学参数对于其功能的发挥起着非常重要的作用。在探讨构建湿地主要水力学设计参数的基础上,根据描述构建湿地污染物去除的几类机理模型:一级动力学模型、连续完全混合反应器模型、Monod动力学模型、Ergun公式以及对流-弥散模型,分别导出了相应的构建湿地污水处理系统水力学设计参数的计算模型并分析了不同设计模型的特点。     

盐酸掺杂聚苯胺粉体表面包覆合金镀层电磁参数研究

盐酸掺杂聚苯胺粉体作为电损耗吸波材料,存在磁损耗差的特点,吸波频带较窄。采用了化学镀的方法在盐酸掺杂聚苯胺粉体表面包覆磁性合金镀层,研究镀后粉体电磁参数的变化。实验结果表明,镀后粉体与原始粉体相比,磁性能有明显改善,但可能镀覆处理过程中粉体掺杂结构遭到破坏,镀后粉体电性能明显减弱。     

空气质量评价的参数化多元组合算子模型

传统的空气质量评价的参数化组合算子模型不具有可比性和普适性。在适当设定指标参照值cj0和指标规范变换式基础上,提出了一个对多项空气指标的规范值xj都适用的空气质量评价的参数化多元组合算子模型;采用混合蛙跳算法对模型中的参数进行优化,得到优化后对多项空气指标皆普遍适用的空气质量评价的参数化多元组合算子模型。该模型被应用于多个不同地区的不同组合指标的空气质量评价,其评价结果与用其它多种方法的评价结果相一致。结果表明:用指标规范值表示的参数化多元组合算子模型为空气质量评价提供了一种计算简便和普适通用的新方法。     

石墨炉原子吸收法测定自来水中总铬升温参数的探讨

对石墨炉原子吸收测定自来水中总铬的方法进行优化。通过对石墨炉升温程序条件进行优化,找出其最佳参数值,其方法的线性关系良好,相关系数为0.999以上,回收率在96.7%~99.5%之间。该法操作简便,灵敏度和准确度高,线性好,便于推广,适合自来水中总铬的测定。     

Microbiological parameters and maturity degree during composting of Posidonia oceanica residues mixed with vegetable wastes in semi-arid pedo-climatic condition

The aim of this study was to characterize the biological stability and maturity degree of compost during a controlled pile-composting trial of mixed vegetable residues (VR) collected from markets of Tunis City with residues of Posidonia oceanica (PoR), collected from Tunis beaches. The accumulation in beaches (as well as their removal) constitutes a serious environmental problem in all Mediterranean countries particularly in Tunisia. Aerobic-thermophilic composting is the most reasonable way to profit highly-valuable content of organic matter in these wastes for agricultural purposes. The physical, chemical, and biological parameters were monitored during composting over 150 d. The most appropriate parameters were selected to establish the maturity degree. The main result of this research was the deduction of the following maturity criterion: (a) C/N ratio < 15; (b) NH₄⁺-N < 400 mg/kg; (c) CO₂-C < 2000 mg CO₂-C/kg; (d) dehydrogenase activity < 1 mg TPF/g dry matter; (e) germination index (GI) > 80%. These five parameters, considered jointly are indicative of a high maturity degree and thus of a high-quality organic amendment which employed in a rational way, may improve soil fertility and soil quality. The mature compost was relatively rich in N (13.0 g/kg), P (4.74 g/kg) and MgO (15.80 g/kg). Thus composting definitively constitutes the most optimal option to exploit these wastes.     

Effects of sterilization treatments on the analysis of TOC in water samples

Decomposition experiments conducted with and without microbial processes are commonly used to study the effects of environmental microorganisms on the degradation of organic pollutants.However,the effects of biological pretreatment (sterilization) on organic matter often have a negative impact on such experiments.Based on the principle of water total organic carbon (TOC) analysis,the effects of physical sterilization treatments on determination of TOC and other water quality parameters were investigated.The results revealed that two conventional physical sterilization treatments,autoclaving and 60 Co γ-radiation sterilization,led to the direct decomposition of some organic pollutants,resulting in remarkable errors in the analysis of TOC in water samples.Furthermore,the extent of the errors varied with the intensity and the duration of sterilization treatments.Accordingly,a novel sterilization method for water samples,0.45 μm micro-filtration coupled with ultraviolet radiation (MCUR),was developed in the present study.The results indicated that the MCUR method was capable of exerting a high bactericidal effect on the water sample while significantly decreasing the negative impact on the analysis of TOC and other water quality parameters.Before and after sterilization treatments,the relative errors of TOC determination could be controlled to lower than 3% for water samples with different categories and concentrations of organic pollutants by using MCUR.     

基于仿真的新建污水处理厂工艺参数调试

基于ASM2D模型建立了上海某新建污水厂倒置AAO流程的数学模型,并采用该厂进、出水设计数据对模型进行校正,其中,ASM2D各组分浓度分布参考文献值.同时,通过仿真计算研究了不同温度下进水流量、污泥回流比、混合液回流比及进水流量分配比对出水总化学需氧量（TCOD）、氨氮（SNH3）、总氮（TN）、总磷（TP）及总悬浮颗粒物（TSS）的影响.结果表明,研究获得的定性和定量两方面结果可供该厂在工艺参数调试中作参考.计算机仿真技术在新建污水厂工艺参数调试中的应用可以减少调试时间,降低调试费用,取得良好的经济效益与环境效益.     

α-HCH在太湖地区环境中的长期迁移与残留的动态模拟

根据太湖地区1/4°×1/6°经纬度网格的地表特征及α-HCH施用量,建立了一个基于同精度网格系统, 包含迁移和传输2个模块的质量平衡模型. 迁移模块使用逸度方法描述α-HCH在每一个网格的多介质环境中的迁移过程,传输模块使用拉格朗日方法描述α-HCH在不同网格间的大气平流和水体径流. 模型模拟了α-HCH在研究区域开始施用至今(1952~2007年) α-HCH在5类4层土壤、气、水和底泥23个环境相中的积累、迁移和残留情况. 模拟值与实测α-HCH浓度对比验证表明两者吻合得很好. 环境温度是影响α-HCH在各环境介质中浓度的最重要因素. 模拟结果表明,在α-HCH使用时期,在土壤中的年积累趋势约为年使用量趋势的5.7%; 在停止使用后,其减少趋势为积累趋势的50%. 在α-HCH使用期间,太湖流域α-HCH的年使用量与其水-气界面沉积通量存在显著的相关性,而与土-气界面通量则无显著相关性. α-HCH停止使用后,太湖流域水-气界面通量表现为向大气的挥发,且自1985年其年挥发通量大于土-气挥发通量. 底泥是α-HCH水-气界面挥发的主要补给源. 2007年太湖流域内α-HCH大气浓度普遍高于流域外大气浓度. 整个模拟时段α-HCH的主要输出途径是流出太湖地区,且以大气平流为主;其次的减少途径是在环境介质中的降解,其中土壤降解量占绝大部分. 2007年环境中残留的α-HCH为总使用量的0.005%,以土壤残留量为主,其次是底泥.