COD/TP比及NO_2~--N/TP对短程反硝化聚磷的影响

污水中COD/TP比和NO2--N/TP比对A/A/OSBR反硝化聚磷工艺运行有重要的影响。实验结果表明:随着COD/TP比值的增加,厌氧释磷增加、厌氧释磷速率提高。但当COD/TP比值为28.5时,过剩的碳源进入缺氧段,反硝化菌利用外碳源消耗,抑制了缺氧吸磷过程;当COD/TP比值为21时,合成的PHB不足,缺氧吸磷效率下降,而且长期在较低COD/TP比条件下运行,激发了聚糖菌与聚磷菌的竞争,聚磷菌处于竞争的劣势,反硝化聚磷能力最终消失;当COD/PO43--P为25时,短程反硝化聚磷效果最佳。NO2--N/TP比与COD/TP的比值相关联,在COD/TP=25的条件下,合适的NO2--N/TP比为3。当NO2--N/PO43--P为5时,SBR上一周期剩余的NO2-会影响厌氧释磷过程。当NO2--N/TP为1.8时,NO2-不足,会使反硝化聚磷过程不完全。     

基于蚁群算法的结构面产状模糊C均值聚类分析

鉴于传统结构面分析方法只能进行相对的优势组数划分,无法准确定量地给出优势结构面的产状,提出了基于蚁群算法(ACA)的结构面产状模糊C均值(FCM)聚类算法;该算法利用ACA算法得到结构面产状的模糊聚类个数,并利用FCM算法得到初始聚类中心,最终得到具有全局分布特性的最优聚类;通过现场实测数据分析,验证了该算法的实用性和有效性。     

基于实例的系统聚类分析法在环境空气质量评价中的应用

基于系统聚类分析理论,介绍系统聚类最短距离法在环境空气质量评价中的应用。系统考虑影响环境空气质量的各种因素,在数据标准化处理的基础上,通过距离计算,达到对环境空气质量的系统分类,为制定区域环境综合治理措施和环境规划提供科学依据。     

HP-5毛细管柱气相色谱法分离水中滴滴涕色谱条件研究

本试验利用HP-5毛细管柱,气相色谱法对水中滴滴涕几种衍生体的分离条件进行了研究和优化,找到了最佳仪器条件,为水中滴滴涕的检测提供了一定的试验参考。     

絮凝沉降处理乳业废水的研究

用硫酸铝PAM混合絮凝剂净化乳制品行业废水,寻找一种最佳的处理方案。通过多组实验显示：硫酸铝投入量280mg／L,pH值为6—7,水温20℃,搅拌速度为40～70r／min时,经处理的废水外观清晰、透明度高,COD去除率均在80％左右,对保障乳品行业的可持续发展起到科学的借鉴作用。     

赋权共原点灰色聚类方法在水库富营养化评价中的应用

以灰色理论为基础,提出了赋权共原点灰色聚类方法,并将该方法应用于10个大型水库的富营养化程度评价中,结果表明该方法具有监测数据利用率高、评价结果可靠、实用性强等特点,是一种评价水库富营养化程度的有效方法。     

冷冻分离法去除水中污染物的对比研究

分别以含Ca2＋、Mg2＋、Na＋等无机离子水样和含有溴氨酸（1-氨基-4-溴-蒽醌-2-磺酸钠）的水溶液、UIImann缩合反应产生废水为研究对象,采用静态渐进冷冻法分别在人工条件下进行实验,分析并对比了冷冻法对水体中污染物的去除效果和规律。结果表明：冷冻法可以有效去除水体中各种污染物,由于污染物自身结构不同,冷冻法对污染物分离有选择性,对有机物的去除高于无机离子,对单一污染物去除高于复杂废水。     

Effectiveness of fluidized pellet bed for removing soluble contaminants

Fluidized pellet bed (FPB) has been successfully applied in water and wastewater treatment. However, the removal mechanism of contaminants especially the soluble ones, is still unclear. This study aimed to evaluate the e ectiveness of FPB reactor for removing soluble contaminants from synthetic wastewater. By only coagulation through jar test operation with addition of polyaluminium chloride (PACl) as primary coagulant and polyacryamide (PAM) as coagulant-aid, the removals of soluble chemical oxygen demand (COD), total phosphorus (TP), and NH4 +-N were found to be only 2.2%–7.5%, 5.7%–25.5%, and 9.9%–18.5%, respectively. However, by FPB operation under the same dosage of coagulants, these values increased to 82.7%, 37.2%, and 50%, indicating that the formation of pellets in the FPB e ectively enhanced the removal of soluble contaminants. By careful comparison of the settleablility and filterability of the pollutants after coagulation, the originally soluble contaminants could be divided into three groups, namely: (1) coagulated-andsettleable, (2) coagulated-but-nonsettleable, and (3) uncoagulable. It was found that not only the first two groups but also a large part of the third group could be e ectively removed by FPB operation. However, the mechanism for the removal of the uncoagulable pollutants by FPB operation still needs further investigation.     

Identification and characterization of the chromium（Ⅵ） responding protein from a newly isolated Ochrobactrum anthropi CTS-325

A Gram-negative, chromium(VI) tolerant and reductive strain CTS-325, isolated from a Chinese chromate plant, was identified as Ochrobactrum anthropi based on its biochemical properties and 16S rDNA sequence analysis. It was able to tolerate up to 10 mmol/L Cr(VI) and completely reduce 1 mmol/L Cr(VI) to Cr(III) within 48 h. When the strain CTS-325 was induced with Cr(VI), a protein increased significantly in the whole cell proteins. Liquid chromatography tandem mass spectrometry (LC-MS/MS) analysis revealed that this protein was a superoxide dismutase (SOD) homology. The measured superoxide dismutase activity was 2694 U/mg after three steps of purification. The SOD catalyzes the dismutation of the superoxide anion (O₂^·−) into hydrogen peroxide and molecular oxygen. This protein is considered to be one of the most important anti-oxidative enzymes for O. anthropi as it allows the bacterium to survive high oxygen stress environments, such as the environment produced during the reduction process of Cr(VI).     

Synthesis, characterization, and adsorption performance of Pb（Ⅱ）-imprinted polymer in nano-TiO2 matrix

Surface ion-imprinted in combination with sol-gel process was applied to synthesis a new Pb(II)-imprinted polymer for selective separation and enrichment of trace Pb(II) from aqueous solution. The prepared material was characterized by using the infrared spectra, X-ray di ractometer, and scanning electron microscopy. The batch experiments were conducted to study the optimal adsorption condition of adsorption trace Pb(II) from aqueous solutions on Pb(II)-imprinted polymer. The equilibrium was achieved in approximately 4.0 h, and the experimental kinetic data were fitted the pseudo second-order model better. The maximum adsorption capacity was 22.7 mg/g, and the Langmuir equation fitted the adsorption isotherm data. The results of selectivity experiment showed that selectively adsorbed rate of Pb(II) on Pb(II)-imprinted polymer was higher than all other studied ions. Desorption conditions of the adsorbed Pb(II) from the Pb(II)-imprinted polymer were also studied in batch experiments. The prepared Pb(II)-imprinted polymer was shown to be promising for the separation and enrichment of trace Pb(II) from water samples. The adsorption and desorption mechanisms were proposed.