戊二醛交联壳聚糖膜的制备

通过戊二醛和壳聚糖在微波辐射条件下制备G-CTS膜。G-CTS考虑了单因素条件对G-CTS膜的影响,并进行了正交试验。G-CTS膜的制备条件为:70mL2%壳聚糖溶液加入一滴25%的戊二醛溶液,35℃中反应30min,然后吸取3mL制膜液制膜。     

膜-生物反应器处理高盐废水膜面污染物特性研究

研究MBR在低有机负荷条件下处理高盐废水的膜面污染物特征.结果表明,稳定运行121 d后,MBR对有机物和NH+4-N去除率稳定,出水效果良好;污泥性质发生较大变化,挥发性固体含量(VSS)/固体含量(SS)的下降,污泥体积指数(SVI)下降,表明污泥中无机成分含量增加,絮体更为紧密,沉降性能变好;污泥溶解性微生物产物(SMP)和胞外聚合物(EPS)成分发生较大变化,蛋白质所占比例降低,腐殖酸所占比例增加;扫描电子显微镜-X射线能谱仪(SEM-EDX)结果表明膜面存在无机污染物,其主要组成元素为Na、Al、Mg、Ca、K、Fe、Ti、Cr、W、Si和Cl;凝胶过滤色谱(GFC)分析表明,SMP中的大分子有机物被膜截留并累积是形成膜污染的原因之一;傅立叶红外(FTIR)光谱和三维荧光光谱(EEM)分析表明,膜面有机污染物的主要成分为糖类、蛋白质和腐殖酸;膜污染物组分质量分析说明在处理高盐废水时无机膜污染不可忽略.     

纳米Ag粒子原位杂化PVDF超滤膜的抗污染性能

以AgNO3为前驱体,聚偏氟乙烯(PVDF)为聚合物基体,聚乙烯吡咯烷酮(PVP)为分散剂和成孔剂,N,N-二甲基甲酰胺(DMF)为还原剂和溶剂,利用相转化法制备了纳米Ag粒子原位杂化PVDF超滤膜.采用扫描电镜、透射电镜、原子力显微镜及接触角测定仪对杂化膜的结构和性能进行了表征.结果表明:原位形成的纳米Ag粒子均匀地分散在聚合物基体中,纳米Ag粒子的添加改善了PVDF膜的亲水性能.以腐殖酸和牛血清蛋白作为污染物的代表,考察了Ag/PVDF膜的抗有机污染性能.以大肠杆菌、耐甲氧西林金黄色葡萄球菌及活性污泥作为微生物的代表,考察了杂化膜的抗生物污染性能.结果证实了与纯PVDF膜相比,Ag/PVDF膜通量衰减较慢,可有效抑制微生物的生长,表面受活性污泥污染程度小,具有显著的抗有机污染和抗生物污染性能.     

Characterization of a salt-tolerant bacterium Bacillus sp. from a membrane bioreactor for saline wastewater treatment

High salt concentrations can cause plasmolysis and loss of activity of cells, but the salt-torlerant bacterium can endure the high salt concentrations in wastewater. In this research 7 salt-torlerant bacteria, which could survive in dry powder products and could degrade organic contaminants in saline wastewater, were isolated from a membrane bioreactor. The strain NY6 which showed the fastest growth rate, best property for organic matter degradation and could survive in dry powder more than 3 months was selected and characterized. It was classified as Bacillus aerius based on the analysis of the morphological and physiological properties as well as the 16 S rRNA sequence and Neigh borjoining tree. The strain NY6 could survive in the salinity up to 6% and the optimal growth salinity is2%; it belongs to a slightly halophilic bacterium. The capability of its dry powder products for COD removal was 800 mg COD/(g·day) in synthesized saline wastewater with salinity of 2%. According to salt-tolerant mechanism research, when the salinity was below 2%, the stain NY6 absorbed K+and Na+to maintain osmotic equilibrium, and when the salinity was above 2%, the NY6 kept its life by producing a large amount of spores.     

Anoxic gas recirculation system for fouling control in anoxic membrane reactor

Anoxic gas recirculation system was applied to control the membrane fouling in pilot-scale 4-stage anoxic membrane bioreactor(MBR). In the anaerobic-anoxic-anoxic-aerobic flow scheme,hydrophilic polytetrafluoroethylene(PTFE) membrane(0.2 μm, 7.2 m2/module) was submerged in the second anoxic zone. During 8 months operation, the average flux of the membrane was 21.3L/(m2·hr). Chemical cleaning of the membrane was conducted only once with sodium hydroxide and sodium hypochlorite. Dissolved oxygen(DO) concentration in the second anoxic zone was maintained with an average of 0.19 ± 0.05 mg/L. Gas chromatography analysis showed that the headspace gas in the second anoxic reactor was mainly consisted of N2(93.0% ± 2.5%), O2(3.8% ± 0.6%), and CO2(3.0% ± 0.5%), where the saturation DO concentration in liquid phase was 1.57 mg/L. Atmospheric O2 content(20.5% ± 0.8%) was significantly reduced in the anoxic gas. The average pH in the reactor was 7.2 ± 0.4. As a result, the recirculation of the anoxic gas was successfully applied to control the membrane fouling in the anoxic MBR.     

ABR-MBR一体化工艺节能降耗措施优化研究

能耗高和膜污染是限制膜生物反应器(MBR)广泛应用的重要因素.为降低工艺运行能耗和延缓膜污染,以厌氧折流板反应器(ABR)-MBR工艺处理生活污水为例,对工艺结构和脱氮除磷运行条件进行优化.结果表明,通过优化ABR-MBR工艺结构,可降低43%的运行能耗,同时可保持较高的COD、NH+4-N、TN和TP去除效果,平均去除率分别为91%、85%、76%和86%.另外,添加颗粒填料可有效延缓膜污染,不过也改变了膜污染的形成过程,膜内部污染物含量显著增多,碳水化合物含量增加,而蛋白质含量减少,碳水化合物/蛋白质比明显增大.最终,增强了MBR反应器的实际应用性能.     

膜生物反应器中膜过滤特征及膜污染机理的研究

以膜生物反应器处理市政污水,通过对活性污泥进行终端过滤来反映膜污染机理,实验表明,最初很短时间内膜污染受膜孔堵塞模型控制,之后受沉积层阻力模型控制,后一阶段是膜污染的主要控制阶段;膜的相对通量随过滤时间呈指数衰减趋势,压力越大,通量衰减越快;污泥沉积层存在压密过程,这一过程中的污泥比阻随压力增大而增大,并得到处理市政污水的污泥压密指数为0.807 8;阻力分布实验表明沉积层阻力占总阻力的90%以上,是膜过滤污染阻力的主要组成部分;活性污泥各组分对膜污染均有贡献,其中悬浮固体、胶体颗粒和溶质产生的阻力分别占87.98%、6.20%和5.82%;根据实验和计算结果,探讨了MBR处理市政污水过程中可能的膜污染机理.     

由"规定时间"到"任选时间"——巴陵石化环氧树脂事业部应急响应预案演练纪实

一个星期天的上午,巴陵石化公司环氧树脂事业部进行了一场特殊的演练--应急响应预案演练.这是该事业部增强事故预案演练的针对性,将事故演练由"规定时间"转向"任选时间"采取的系列举措之一. 上午8时30分,该事业部针对设想的离子膜车间氯干燥岗位、盐水车间液氯冷冻岗位"氯气泄漏"的突发情况,紧急启动事业部级防氯气泄漏事故预案.成立以事业部值班领导为指挥长的应急指挥部,立即通知事业部领导、相关职能管理和车间人员、抢险应急分队,所有临时通知人员在规定时间内赶到"事故"现场,按照各自职责有条不紊进行应急处理.     

基于CFD的超薄平板膜MBR流态模拟及优化分析

随着MBR的广泛应用,为控制膜污染导致高运行成本问题,优化新型平板膜MBR的曝气条件成为目前的一个研究热点.本研究通过使用CFD Fluent软件,结合多相流模型和湍流模型进行超薄平板膜MBR的高质量流态模拟,量化膜面剪切力,并从流场及膜污染角度分别对3种气水比(10∶1、15∶1和20∶1)工况下的MBR进行了优化分...     

辐条状多层通道反渗透膜(RCDT)污染控制分析

膜污染及其防治是影响膜系统稳定运行的关键因素。RCDT作为新的垃圾渗滤液处理技术的有效手段,文中详细的介绍了膜材料、膜组件、膜系统以及膜工艺对膜污染的影响,并结合实际的项目运行情况,提出了控制膜污染的方法和措施。