植物秸秆的综合利用及防治造纸污染方法

该发明提供的是一种植物秸秆的综合利用及防治造纸污染方法：将植物秸秆粉碎后，加水进行高温水煮处理，再用热水洗涤；高温水煮后的固形物，加入H2SO4进行连续水解处理，水解结束后过滤，水解处理后的液体用作制造木糖的原料，水解处理后的固形物加入NaOH溶液进行高温碱蒸煮处理，     

基于车载测试的重型柴油车尾气典型烷烃排放特征

本文采用车载排放测试系统对11辆国Ⅰ~国Ⅳ标准重型柴油车进行实际道路测试,利用GC-MS对样品中典型烷烃进行定量分析,解析重型柴油车尾气典型烷烃排放特征及规律.结果表明,排放标准对重型柴油车尾气中正构烷烃、藿烷类有机物排放有显著影响,总体呈现随排放标准的加严而降低的趋势,相比于国Ⅰ测试车辆,国Ⅳ测试车辆正构烷烃、17α(H),21β(H)-C30藿烷(C30-藿烷)、22S-和22R-17α(H),21β(H)-C31升藿烷(22S-C31升藿烷;22R-C31升藿烷)总排放因子分别降低了72.23%,64.95%,70.78%和74.68%.气相正构烷烃呈双峰前锋型,以C17~C18为主峰碳,固相呈单峰前锋型,以C18~C21为主峰碳.藿烷类有机物其22S-C31升藿烷/(22S-C31升藿烷+22R-C31升藿烷)的比值在0.46~0.56之间,平均值为0.50,符合石油中藿烷的分布特征.正构烷烃总排放因子与17α(H),21β(H)-C30藿烷总排放因子呈现出一定的线性关系,其R~2为0.926 8.此外,行驶工况对测试车辆正构烷烃及藿烷类有机物排放有较大影响,非高速工况下排放因子是高速工况的1.69~2.42倍.     

H2S匀圆杂选择性催化氧化工艺及催化剂研究现状

论述了石油流化催化裂化烟气中H2S气体的选择性催化氧化处理工艺和工艺中所使用的各种类型选择性氧化催化剂.目前已发展并投入使用的选择性氧化工艺主要有:Superclaus工艺、Euroclaus工艺、Clinsulf-Do工艺、BSR/Hi-Activity工艺、Selectox工艺和Modop工艺等,各工艺具有不同的特点和应用范围.H2S选择氧化催化剂主要包括以下几种体系:碳体系、SiC载体体系、分子筛体系、氧化物体系和柱撑黏土体系等.其中碳体系和氧化物体系的研究开展的较早较多,关于分子筛体系的研究近期有所减少,SiC是研究人员认为非常有潜力的一个载体体系,其相关体系研究也一直在进行之中,柱撑黏土体系还处于初步研究阶段,离实际应用尚有距离.     

UV和H2 O2联合消毒灭活饮用水中大肠杆菌研究

以大肠杆菌为研究对象,对单独紫外线(UV)、H2O2及两者不同组合方式的灭活效果进行了分析.结果表明,单独H2O2对大肠杆菌基本无灭活效果,加入浓度为20 mg·L-1的H2O2接触时间为30 min时,灭活率仅为0.02个对数级;单独UV工艺可在一定程度上灭活大肠杆菌,紫外线剂量为10 mJ·cm-2时,灭活率可达到4.51个对数级.紫外线和H2O2联合消毒在一定程度上提高了消毒效果,且不同的组合方式对灭活效果有很大的影响.先UV后H2O2消毒效果优于先H2O2后UV,当紫外线剂量为5 mJ·cm-2时,加入H2O2分别反应2.5、5、10、20 min后,两者的灭活率分别较单独UV消毒增加0.09、0.35、0.38、0.68和0.01、0.07、0.14、0.53个对数级.而UV与H2O2同时消毒效果优于UV与H2O2顺序消毒,当紫外线剂量为5 mJ·cm-2时,加入H2O2反应20 min后,灭活率较UV-H2O2和H2O2-UV工艺分别增加了0.43和0.58个对数级.随着紫外线强度的增加,大肠杆菌的灭活效果不断提高.     

Effects of physical and chemical characteristics of surface sediments in the formation of shallow lake algae-induced black bloom

Surface sediments are closely related to lake black blooms. The dissolved oxygen （DO） distribution and its penetration depth in surface sediments as well as the migration and transformation of redox sensitive elements such as Fe and S at the sediment-water interface are important factors that could influence the formation of the black bloom. In this study, dredged and undredged sediment cores with different surface properties were used to simulate black blooms in the laboratory. The Micro Profiling System was employed to explore features of the DO and ∑H2S distribution at the sediment-water interface. Physical and chemical characteristics in sediments and pore waters were also analyzed. The results showed that sediment dredging effectively suppressed the black blooms. In the undredged treatment, DO penetration depth was only 50 μm. Fe^2＋ concentrations, ∑H2S concentrations, and ∑H2S production rates were remarkably higher in surface sediments and pore waters compared to control and dredged treatments. Furthermore, depletion of DO and accumulation of Fe^2＋ and ∑H2S in surface sediments and pore waters provided favorable redox environments and necessary material sources for the blooms. The study results proved that physical and chemical characteristics in surface sediments are important factors in the formation of the black bloom, and could provide scientific guidance for emergency treatment and long-term pre-control of black blooms.     

Formic acid as an alternative reducing agent for the catalytic nitrate reduction in aqueous media

Formic acid was used for the nitrate reduction as a reductant in the presence of Pd:Cu/γ-alumina catalysts. The surface characteristics of the bimetallic catalyst synthesized by wet impregnation were investigated by SEM, TEM-EDS. The metals were not distributed homogeneously on the surface of catalyst, although the total contents of both metals in particles agreed well with the theoretical values. Formic acid decomposition on the catalyst surface, its influence on solution pH and nitrate removal efficacy was investigated. The best removal of nitrate (50 ppm) was obtained under the condition of 0.75 g/L catalyst with Pd:Cu ratio (4:1) and two fold excess of formic acid. Formic acid decay patterns resembled those of nitrate removal, showing a linear relationship between kf (formic acid decay) and k (nitrate removal). Negligible amount of ammonia was detected, and no nitrite was detected, possibly due to buffering effect of bicarbonate that is in situ produced by the decomposition of formic acid, and due to the sustained release of H2 gas.     

TH-890烟气连续排放监测系统与崂应3012H型自动烟尘气测试仪的比较研究

本文着重论述了TH-890烟气连续排放监测系统与崂应3012H型自动烟尘气测试仪的设计原理,从其各自技术特点进行分析比较.并在火电厂固定源监测中进行比对监测.     

添加H2O2加速低合金钢海水腐蚀的主要影响因素研究

采用极化曲线、旋转圆盘电极试验和失重（质量损失）法研究了低合金钢在添加了H。o：的海水中腐蚀加速的主要影响因素。结果发现低合金钢在添加H2O2的海水中腐蚀加速主要受到了H2O2浓度、温度、搅拌速度和H2O2添加周期的影响。研究表明,搅拌速度不变、H2O2添加周期相同的条件下,在H2O2浓度为0．8mol／L的70℃海水中,低合金铜的腐蚀加速最显著;在试验的转速范围内,加速作用随搅拌速度增大变得更为显著;H2O2加入后350min内加速作用较明显。     

铜、镉对(鱼免)鱼幼鱼鳃丝Na+-K+-ATPase和肝脏SOD酶活性的影响

以(鱼免)鱼(Miichthys miiuy)幼鱼为研究对象,研究了Cu2 和Cd2 对(鱼免)鱼幼鱼鳃丝Na -K -ATPase和肝脏SOD酶活性的影响.以6个Cu2 浓度(0.01 mg/L、0.05 mg/L、0.1 mg/L、0.2 mg/L、0.4 mg/L和0.8 mg/L)和6个Cd2 浓度(0.005 mg/L、0.025 mg/L、0.05 mg/L、0.1 mg/L、0.2 mg/L、0.4 mg/L)对(鱼免)鱼幼鱼进行8 d染毒.结果表明,Cu2 和Cd2 各处理组(鱼免)鱼鳃丝Na -K -ATPase活力随取样时间的变化显著(P＜0.05),且呈峰值变化,在1 d时达到最大值,然后缓慢下降,最后各处理组酶活力趋于稳定.两种重金属离子对(鱼免)鱼鳃丝Na -K -ATPase活力的影响在同一取样时间各处理组间的差异也显著(P＜0.05),其影响程度与重金属的浓度呈负相关,且Cd2 浓度为0.4 mg/L时,在第8天酶活力与对照组的差异不显著(P＞0.05).Cu2 和Cd2 在1～8 d对(鱼免)鱼鳃丝Na -K -ATPase活力的诱导率表现为Cu2 ＞Cd2 .低浓度组Cu2 和Cd2 曝露时,(鱼免)鱼肝组织中SOD活性变化在短时间内不明显(P＞0.05),但随着时间的延长,SOD活性提高,与对照组差异显著(P＜0.05),导致"毒物兴奋效应".高浓度Cu2 和Cd2 曝露时,随着时间的延长和浓度的增强,肝组织SOD的活力抑制越明显(P＜0.05).     

活性炭纤维电极电还原产H2O2的实验研究

利用活性炭纤维作为阴极,比较了活性炭纤维电极和石墨板电极产H2O2的浓度,并对影响活性炭纤维电极产H2O2的因素(pH、电流密度和电解质浓度)进行了研究.研究发现,活性炭纤维电极电还原产生H2O2的浓度远大于石墨板电极.当实验在pH=3.00、电流密度8.89 mA/cm2和电解质(Na2SO4)浓度0.05 moL/...