贫燃条件下氮氧化物净化催化剂的研究

贫燃发动机由于燃烧充分具有比燃料利用率高、动力输出高、HC和CO排放量少等优点,但在燃烧过程中却产生了大量的NOx。目前,研究新型贫燃条件下NOx的净化催化剂成为当前催化领域研究的热点。本文主要介绍了目前脱除贫燃条件下NOx净化催化剂的国内外研究现状,并指出今后的研究方向提供参考。     

基于RBF和PSO的双喉道气动矢量喷管优化设计

本文探索了一种能多变量综合优化的方法,即对喷管进行参数化设计后,用均匀试验设计(UED)将试验样本均匀散布在设计区间内,求出各性能参数后,利用径向基神经网络(RBF)对试验样本进行拟合,再用粒子群算法(PSO)对训练好的神经网络进行寻优,找出了更好的双喉道气动矢量喷管设计参数组合。数值模拟结果显示,优化后的双喉道气动矢量喷管的矢量角有了明显提高。试验表明这种优化方法具有很好的优化能力,可以用来对喷管几何外形进行参数优化。      

并联式TBCC发动机排气系统性能数值模拟

针对一个并联式涡轮基组合循环(Turbine Based Combined Cycle, TBCC)发动机排气系统的气动方案,对其在整个飞行包线范围内典型工作点上的流场进行了数值模拟研究,获得了飞行包线范围内排气系统相应的推力系数、升力、俯仰力矩随飞行马赫数的变化关系。计算结果显示,在整个飞行包线范围内,排气系统的轴向推力系数随着飞行马赫数先减小后增大,在跨声速飞行时降到最低 Ma=0.9,涡喷不加力时为0.562,加力时0.662),在设计点附近达到最大;升力和俯仰力矩性能在亚声速及跨声速飞行时较差,在超声速飞行时随着飞行马赫数增加逐渐好转。表明排气系统在跨声速飞行范围内工作时应采取措施以改善其性能。      

Palladium-phosphinous acid complexes catalyzed Suzuki cross-coupling reaction of heteroaryl bromides with phenylboronic acid in water/alcoholic solvents

Highly active, air-stable and water-soluble palladium-phosphinous acid complexes have been applied to Suzuki cross-coupling reaction of heteroaryl bromides under mild conditions in water/alcoholic solvents. Suzuki cross-coupling reaction of heteroaryl bromides with phenylboronic acid occurred efficiently using palladium phosphinous acid complexes (POPd) and phase transfer catalyst (tetrabutylammonium bromide and polyethylene glycol) in water/ethanol mixture, water/propanol mixture and neat water respectively, the corresponding yields of cross-coupling heteroaryl-aryls were satisfied. The tert-butyl substituted ligand di-tert-butylphosphino in combination with POPd was found to be more active than the same family derived catalysts dipalladium complexes POPd1 and POPd2, and other two kinds of Pd-catalysts Pd(PPh₃)₄ and Pd₂(dba)₃. The mechanism of Suzuki cross-coupling reaction between heteroaryl bromides and phenylboronic acid in water was proposed with respect to the key role of phase transfer catalyst on the transmetallation step. Compared with other solid phase transfer catalysts, TBAB was tested as the ideal one. The alkalinity of base and the molar proportion between POPd and TBAB were investigated in water and alcoholic solvents. Notably, in the presence of TBAB adding alcoholic solvents into water enhanced the yields of target products. However in terms of the liquid phase transfer catalyst of PEGs, mixing water into PEGs could slightly decrease the yields with respect to the water free PEGs bulk phase, which was probably due to the homogenous liquid conditions in pure PEGs and weak interactions between PEGs and heteroaryl bromide molecules in water depending on their molecular chain lengths.     

Mn/TiO2和Mn-Ce/TiO2低温脱硝催化剂的抗硫性研究

在低温选择性催化还原(SCR)反应条件下考察了烟气残余SO2对Mn/TiO2和Mn-Ce/TiO2催化剂选择性催化还原活性的影响,同时对SO2的影响机理进行了探讨.结果发现,Mn/TiO2催化剂在SO2反应气氛中失活很快,硫铵盐的沉积和活性组分的硫酸化是催化剂失活的重要原因;Ce的加入可以有效地抑制催化剂活性组分的硫酸化,同时还能降低硫酸盐在催化剂表面的稳定性,从而可以提高催化剂的抗硫性.     

SO2对MnOx/PG催化剂低温脱硝的影响机理研究

采用等体积浸渍法制备了锰氧化物负载凹凸棒石(MnO_x/PG)低温SCR催化剂,通过SO₂暂态响应、程序升温表面反应(TPSR)等实验技术研究了烟气中SO₂对催化剂SCR脱硝活性的影响行为.采用程序升温脱附(TPD)、BET比表面及孔径分布测定、XPS等表征技术对催化剂硫中毒的机理及化学本质进行了深入分析.结果表明,低温下烟气中SO₂对MnO_x/PG催化剂的SCR脱硝活性存在显著的抑制作用,催化剂中毒主要由烟气中SO₂的催化氧化引起.一方面SO₂氧化为SO₃后与NH₃及H₂O竞争反应形成复杂的硫酸铵盐堵塞催化剂孔道,另一方面与活性组分MnO₂结合形成MnSO₄使得部分活性组分形态发生变迁.其中硫酸铵盐的形成可通过适当的热处理得以去除,而MnSO₄则不可恢复,但催化剂SCR活性却显著增加,表明MnSO₄的形成不是催化剂失活的主要因素.吸附态的硫可显著增加催化剂表面酸性,因此对SCR活性有促进作用.催化剂失活主要机理为:由气相SO₂的连续氧化并与NH₃相结合形成硫酸铵盐,并且在低温下难以分解,以致堵塞催化剂活性中心.     

Porous FeOx/BiVO4-δS0.08：Highly efficient photocatalysts for the degradation of Methylene Blue under visible-light illumination

Porous S-doped bismuth vanadate with an olive-like morphology and its supported iron oxide （y wt.% FeOx/BiVO4-δS0.08, y = 0.06, 0.76, and 1.40） photocatalysts were fabricated using the dodecylamine-assisted alcohol-hydrothermal and incipient wetness impregnation methods, respectively. It is shown that the y wt.% FeOx/BiVO4-δS0.08 photocatalysts contained a monoclinic scheetlite BiVO4 phase with a porous olive-like morphology, a surface area of 8.8-9.2 m^2/g, and a bandgap energy of 2.38-2.42 eV. There was co-presence of surface Bi^5＋, Bi^3＋, V^5＋, V^3＋, Fe^3＋, and Fe^2＋ species in y wt.% FeOx/BiVO4-δS0.08. The 1.40 wt.% FeOx/BiVO4-δS0.08 sample performed the best for Methylene Blue degradation under visible-light illumination. The photocatalytic mechanism was also discussed. We believe that the sulfur and FeOx co-doping, higher oxygen adspecies concentration, and lower baudgap energy were responsible for the excellent visible-light-driven catalytic activity of 1.40 wt.% FeOx/BiVO4-δS0.08.     

多相催化臭氧氧化处理印染废水

针对印染废水高有机物、高色度、水质水量变化大的特点,研究开发处理效率高,适应性强的印染废水处理集成工艺,具有重要的现实意义 采用多相催化臭氧化工艺对印染废水进行试验研究.结果表明：采用浸渍法制备出的负载型铁锰氧化物催化剂FexOy＋MnOx/AC较单组分催化剂具有更好的活性及稳定性;经多相催化臭氧氧化处理后,印染废水COD、氨氮、总磷、色度去除率分别为81.7％、90.2％、93.4％、99.1％,达到较好的去除效果.     

Co负载量对Co/TiZrO4催化CO2氧化乙烷脱氢制乙烯反应性能的影响

Co基催化剂在低碳烷烃直接脱氢及氧化脱氢制烯烃方面表现出良好的应用潜力.为了探究Co物种的价态对CO₂氧化乙烷脱氢制乙烯的影响,以共沉淀法制备的TiZrO₄固溶体为载体,采用浸渍法制备了一系列X%Co/TiZrO₄(X=0.5、1、3、5和7.5)催化剂.结果表明,0.5%Co/TiZrO₄和1%Co/TiZrO₄催化剂的催化活性较差,但保持了相当高的C₂H₄选择性(>90%)和碳平衡(≈100%);3%Co/TiZrO₄催化剂在反应过程中表现出良好的C₂H₆和CO₂活化能力,在650℃、质量空速WHSV=9000 mL?g^-1?h^-1的反应条件下获得了约25%的乙烯收率;而5%Co/TiZrO₄和7.5%Co/TiZrO₄催化剂则在600℃及以上温度反应...     

催化剂在生物质水热碳化过程中的应用研究进展

在追求废弃物资源化利用的过程中,生物质转化技术受到广泛关注。水热碳化法目前被认为是将高含水率生物质转化为生物炭的最有效技术之一,其与传统的热解炭相比,获得的水热炭具有灰分低、热值高、比表面积大、吸附能力强等特点。然而,生物质原料的差异需要更高的能耗优化,以此提高水热炭产率和性能。添加催化剂可以克服这一问题,对提高原料的反应速率及水热炭热稳定性具有重要意义,但少有文献归纳总结催化剂在生物质水热碳化过程中的应用。将催化剂分为盐类、酸类、金属氧化物、沸石和组合催化5种类型,探讨添加催化剂对水热炭产率和理化性质的影响,分析各类催化剂的催化反应机理,总结其在水热碳化中的催化特点,并讨论了催化剂在生物质水热碳化中未来重点研究方向。