铣削工艺参数对锡铋合金表面粗糙度特征影响及试验分析

目的对锡铋合金表面粗糙度特征进行研究分析,提高表面加工质量。方法采用正交试验设计方法,以最小表面粗糙度作为优化指标,以主轴转速、铣削深度、进给速度、铣削宽度作为影响因素,进行精密铣削试验研究。结果利用方差分析确定了进给速度是锡铋合金铣削表面粗糙度最重要的影响因素,并基于田口方法优化分析得到了锡铋合金铣削加工工艺最优组合。结论采用田口法对锡铋合金铣削工艺参数优化,有效地减少了加工表面粗糙度,提高了工件表面质量。     

从废载体催化剂中回收提炼高纯铂

一、引言与金银相比,人类发现和生产铂族金属的历史并不长。自1778年开始从哥伦比亚乔科砂矿中开采铂到现在只不过二百多年的历史。1823年德拜莱勒发现铂对乙醇的氧化和氢的氧化有催化作用,揭开了铂族金属的催化特性,导致了科学技术上的一次革命。铂(或铂铼等)催化重整几乎生产     

铁铬合金在塑性变形时温度对强化的影响

对当前在化工、石油等行业中广泛使用的耐蚀铁铬合金,在塑性成形中的主要工艺参数做了实验研究。在不同成形温度和变形程度下,其制件所得的机械性能相差较大,生产中可根据制件的要求,选择合理的工艺参数。     

钢结硬质合金冷作模具硼-硫复合渗强化工艺

为了使钢结硬质合金制成的冷作模具的使用寿命进一步提高,研究了一种硼一硫共渗强化新工艺,试验结果表明,渗硼模具的使用寿命比未渗硼模具提高了10多倍,硼～硫复合渗透模具的使用寿命又比单一渗硼模具提高了50％～70％。     

2297-T87铝锂合金用于大气腐蚀性的比较

目的利用铝锂合金的大气腐蚀试验结果评价大气腐蚀性。方法对第三代铝锂合金2297-T87在6个自然环境试验站户外暴露后的腐蚀质量损失、腐蚀速率、腐蚀深度、拉伸性能进行分析,综合评价各地区大气腐蚀性。结果2297-T87铝锂合金在团岛、万宁、永兴岛暴露1年后出现显著腐蚀,腐蚀质量损失和腐蚀速率约为江津的2倍、西双版纳的4倍,北京的腐蚀质量损失和腐蚀速率最低。合金最大腐蚀深度的变化趋势与腐蚀质量损失和腐蚀速率的变化趋势一致。观察横截面发现,在万宁、永兴岛、江津暴露后,合金发生严重的点蚀,在腐蚀产物覆盖区域下方形成不规则蚀坑,而在团岛暴露后,合金内部发生晶间腐蚀。合金在江津、永兴岛、万宁、团岛暴露后的拉伸性能仍比较接近,且拉伸强度保持率在90%以上。结论将2297-T87铝锂合金暴露1年后的腐蚀质量损失、腐蚀速率、腐蚀深度作为表征指标,获得各试验站的大气腐蚀性顺序为:北京<西双版纳<江津<永兴岛<万宁<团岛。     

Distribution of Platinum group elements in road dust in the Beijing metropolitan area, China

Dust samples collected from the Beijing metropolitan area （China） were evaluated to determine the distribution and the concentration of platinum group elements （PGEs）. The dust particles that were smaller than 100 mesh size fraction （150 μm） were analyzed after aqua regia digestion. Concentrations ofPt, Rh, and Pd were found to be between 3.96 and 356.3 ng/g, 2.76 and 97.11 ng/g, and 0.1 and 124.9 ng/g, respectively, in the urban areas of Beijing, whereas for the background samples collected from the suburbs of Beijing, the concentrations of Pt, Pd, and Rh were very low and ranged from 0.1 to 0.9 ng/g, 0.5 to 1.4 ng/g, and 0.8 to 2.2 rig/g, respectively. The distributions of PGEs in road dust were an accurate reflection of the levels of pollution and were found to match with the local traffic conditions. A strong positive correlation was established among all the dements found in road dust. This suggests that emissions of abraded fragments from vehicle exhausts may be the source of the high concentration of Pt, Rh, and Pd in road dust along the main roads of Beijing.     

Novel synthetic approaches and TWC catalytic performance of flower-like Pt/CeO2

A novel Ultrasonic Assisted Membrane Reduction （UAMR）-hydrothermal method was used to prepare flower-like Pt/CeO2 catalysts. The texture, physical/chemical properties, and reducibility of the flower-like Pt/CeO2 catalysts were characterized by X-Ray Diffraction （XRD）, Scanning Electron Microscope （SEM）, Transmission Electron Microscope （TEM）, N2 adsorption, and hydrogen temperature programmed reduction （HE-TPR） techniques. The catalytic performance of the catalysts for treating automobile emission was studied relative to samples prepared by the conventional wetness impregnation method. The Pt/CeO2 catalysts fabricated by this novel method showed high specific surface area and metal dispersion, excellent three-way catalytic activity, and good thermal stability. The strong interaction between the Pt nanoparticles and CeO2 improved the thermal stability. The Ce4＋ ions were incorporated into the surfactant chains and the Pt nanoparticles were stabilized through an exchange reaction of the surface hydroxyl groups. The SEM results demonstrated that the Pt/CeO2 catalysts had a typical three-dimensional （3D） hierarchical porous struc- ture, which was favorable for surface reaction and enhanced the exposure degree of the Pt nanoparticles. In brief, the flower-like Pt/CeO2 catalysts prepared by UAMR-hydrothermal method exhibited a higher Pt metal dispersion, smaller particle size, better three-way catalytic activity, and improved thermal stability versus conven- tional materials.     

难熔金属复合板制压力容器的焊接

1前言 难熔金属（refractory metals）一般指熔点高于1650℃并有一定储量的金属（钨、钽、钼、铌、铪、铬、钒、锆和钛）,也有将熔点高于锆熔点（1852℃）的金属称为难熔金属。以这些金属为基体,添加其他元素形成的合金称为难熔金属合金。难熔金属最重要的优点是有良好的高温强度,对熔融碱金属和蒸气有良好的耐蚀性能。最主要的缺点是高温抗氧化性能差。     

废合金刀头中锡的回收利用工艺研究

探讨了废合金刀头中锡的回收利用工艺。使用三氯化铁和盐酸的混合液溶解刀头,以还原铁粉置换出铜后,添加1倍量的三氯化铁氧化Sn²⁺,使用5%的氢氧化钠以6 mL/min的速度调节溶液pH值为1.10,可较好地沉淀出锡。回收所得锡泥可供锡产业链相关厂家作为原料使用。     

基于锡合金的水下机器人密封自修复系统设计

目的 解决水下机器人推进器密封系统在驱动电机轴高速旋转和高水压情况下,密封件易磨损失效导致发生漏水故障的问题。方法 利用余度设计思想,在原有密封结构的基础上,设计一种基于锡合金的水下机器人密封自修复系统,当原有密封结构失效漏水,密封自修复系统便控制限位锡合金块加热至融化,使锡合金块的限位作用消失,进而释放冗余密封圈,并通过拉簧的作用将冗余密封圈推至密封槽内,从而恢复推进器的密封功能。为验证设计的可靠性,又通过有限元软件ANSYS对密封自修复结构中影响密封性能的关键部件进行静力学分析。结果 关键部件的强度仿真结果均满足设计要求,在密封自修复实验装置箱体内注适量水,并施加2 MPa的水压保持一段时间,密封自修复系统成功启动,且其密封性能传感器未检测到其漏水。结论 密封自修复系统可在漏水的情况下顺利启动,并起到密封的作用,验证了设计的可行性。