氮氟掺杂二氧化钛(N,F-TiO2)的制备及可见光催化活性的研究

以氨水为氮源,氢氟酸为氟源,采用溶胶-凝胶法制备了氮氟掺杂二氧化钛(N,F-TiO2)光催化剂,并通过X-射线衍射(XRD)和扫描电镜(SEM)技术对其晶型和形态进行表征.最后以酸性红B为模型污染物,探讨了N和F加入量、焙烧温度、焙烧时间、照射时间、催化剂用量、溶液初始浓度和照射功率等因素对N,F-TiO2可见光催化活性的影响.结果表明,制备的N,F-TiO2以锐钛型为主,N和F的掺杂对TiO2的晶相没有明显改变,但可以扩大TiO2的可见光响应范围.当N和F的加入量均为2.0%,且在500℃下焙烧40 min时,得到的N,F-TiO2的可见光催化活性明显高于单N或单F掺杂的TiO2(N-TiO2或F-TiO2).对于50 mL浓度为10.0 mg·L-1的酸性红B溶液,当催化剂加入量为1.5 g·L-1,128W光照3.0 h,溶液pH=5.6时,去除率为85.40%.适当延长光照时间至4.0 h,降解率几乎可达100%.另外,研究还证明了N,F-TiO2催化可见光降解过程中有.OH自由基生成.     

La3+掺杂对吸附相反应制备TiO2复合催化剂的结晶过程及弱紫外光下活性的影响

利用吸附相反应技术制备弱紫外光响应的高效催化剂,并通过XRD、XPS以及HRTEM探索了不同焙烧温度下La3+掺杂量对TiO2结晶过程的影响.结合弱紫外光下甲基橙的降解反应,深入研究催化剂结晶过程的变化对弱紫外光下催化剂活性的影响.结果表明,La3+掺杂会抑制TiO2的结晶过程.当焙烧温度或者掺杂量较低时,La3+不能进入TiO2的晶格结构但会轻微地抑制TiO2的结晶过程;未进入晶格结构的La3+存在会引入光生载流子的浅能级捕获中心,在弱光体系中极大提升了催化剂的活性.当La3+的掺杂量为0.05%(原子分数)时,经过900℃焙烧后催化剂降解能力最高,其活性超过商用P25的2倍多.在较高La3+掺杂量(超过0.20%)时,900℃焙烧后一定量La3+进入TiO2的晶格结构而大大抑制了TiO2结晶;这种强烈的抑制作用使得催化剂中存在大量无定形结构TiO2,无定形TiO2甚至多于700℃焙烧后的催化剂,反而大大抑制了弱光体系中催化剂活性.     

镍掺杂二氧化钛光催化剂的制备与光催化性能研究

利用溶胶-凝胶法制备了镍掺杂的二氧化钛,采用紫外可见分光光度计、傅里叶红外分光光度计、X衍射仪(XRD)、扫描电镜(SEM)等测试手段对结果进行了表征。表征结果表明在550℃下煅烧的产物主要是锐钛型二氧化钛,镍的掺杂使得二氧化钛的紫外可见反射光谱明显红移,且镍掺杂二氧化钛的粒度减小,团聚程度下降。以活性艳蓝KN-R为模型降解目标物,通过比较镍掺杂二氧化钛、纯二氧化钛以及标准P25二氧化钛的光催化性能发现镍掺杂二氧化钛的光催化活性最好。当钛酸正丁酯/乙醇比为1:25;钛酸正丁酯/冰乙酸比为1:1;钛酸正丁酯/硝酸镍比为1 000:3;煅烧温度为550℃,煅烧时间为2 h时,镍掺杂二氧化钛的光催化效率最高,达到73.3%。     

Ce(Ⅲ)对UV-B辐射胁迫下大豆幼苗光化学反应的影响

用水培法研究Ce(Ⅲ)对UV-B辐射胁迫下大豆幼苗光化学反应的影响.结果表明, 20 mg·L^-1 CeCl₃使大豆幼苗净光合速率(Pn)、Hill反应、Mg²⁺-ATPase活性与光合磷酸化活力4项指标较对照提高23.2%～14.3%; 有效抑制UV-B辐射(T₁=0.15 W·m^-2和T₂=0.45 W·m^-2)胁迫下4项指标下降, 4项指标降幅［Ce(Ⅲ)+T₁为36.6%～15.9%,Ce(Ⅲ)+T₂为65.6%～33.2%］小于对应的UV-B辐射组(T₁为50.9%～23.3%,T₂为77.3%～51.4%). 动态变化显示, Ce(Ⅲ)减缓了胁迫期4项指标的下降趋势,促进了恢复期4项指标上升幅度. 说明Ce(Ⅲ)通过减轻UV-B辐射对大豆幼苗光化学反应的伤害, 遏制UV-B辐射胁迫下大豆幼苗Pn下降.     

Non-UV based germicidal activity of metal-doped TiO2 coating on solid surfaces

A stain-based screening method was developed to screen different catalyst coatings for their germicidal activity. A Baclight dead/live bacteria viability kit （invitrogen, molecular probes） was used for staining the cell. The screening was carried out following a standard procedure. This included loading cell suspension to solid surface and maintaining contact for 30 min, then staining with a mixture containing dyes. The stained cells were observed using an epifluorescent microscope and photographed with a CCD camera under UV. Metal-doped TiO2 coatings on AI plates were prepared and tested for non-UV germicidal activity without using UV. It was tested using model microorganisms such as Bakers Yeast （Saccharomyces cerevisiae）, Bacillus subtilis, Pseudomonas putida, and Escherichia coli. On the basis of the germicidal activity of catalyst and the degree of damage caused to the cells, the stained cells may appear green （viable）, green with red or yellow nuclei and yellow （compromised） or red （nonviable）. According to their stained color, cells were counted to calculate the percentage of dead, live, and compromised cells. Compromised cells are cells that grow very slowly after reculturing indicating a degree of reversible cell damage. Screening the germicidal activity using this staining method is accurate and efficient, and requires less time than the culture-based method. A modification to the procedure for measuring germicidal activity of rough surfaces or fibrous coatings was developed. Both TiO2 and metal-doped TiO2 （Ag, Pt, Au, Cu） possess non-UV based germicidal activity. The germicidal activity of TiO2 was found to be related with its wetting property and can be improved by UV irradiation before testing. It is not greatly affected by contact time, indicating a fast acting germicidal activity.     

钒掺杂磁铁矿对亚甲基蓝的吸附性能研究

采用共沉淀硝酸盐氧化法合成了不同掺杂量的钒掺杂磁铁矿(Fe3-xVxO4, x<0.4),并运用化学分析、X射线衍射(XRD)、BET比表面积测试、傅立叶变换红外光谱(FTIR)以及N2和空气气氛下的热重-差示扫描量热分析(TG-DSC)等手段对合成的Fe3-xVxO4进行了结构表征. 结果显示,合成的Fe3-xVxO4为立方晶系尖晶石结构,钒离子主要类质同像替换八面体位上的Fe3+. 合成的Fe3-xVxO4是纳米级的磁性材料,晶粒尺寸为28～35 nm. 钒掺杂作用增加了磁铁矿的表面羟基量. 吸附实验结果表明,在中性pH下,Fe3-xVxO4对亚甲基蓝的饱和吸附量随钒掺杂量的增加明显增大,其吸附等温线符合Langmuir方程. Fe3-xVxO4对亚甲基蓝的吸附反应主要在前25 min内完成,动力学曲线符合准二级动力学方程. 此外,提高溶液的pH有利于Fe3-xVxO4对亚甲基蓝的吸附.     

Visible light responsive N-F-codoped TiO2 photocatalysts for the degradation of 4-chlorophenol

Visible light responsive N-F-codoped TiO₂ photocatalysts exhibit a higher catalytic activity than N-doped TiO₂ for the degradation of 4-chlorophenol due to the synergistic effect of nonmetal elements.     

中心组合设计优化S-Cr-TiO2催化剂光降解工艺条件

在确定的温度和光照条件下,采用中心组合设计法研究了固相反应法合成的硫与铬共掺杂二氧化钛(S-Cr-TiO2)光催化剂与水溶苯胺蓝(ANB)可见光降解过程中的三个作用因子:催化剂的浓度、水溶苯胺蓝水溶液的pH值及其初始浓度之间的相互作用关系,得到了影响因子与降解速率之间的回归方程及因素之间相互作用的响应面图.结果表明,S...     

Photocatalytic activity of Fe-doped CaTiO3 under UV-visible light

The photocatalytic degradation of methylene blue（MB） over Fe-doped CaTiO3 under UV-visible light was investigated. The as-prepared samples were characterized using X-ray diffraction（XRD）, scanning electron microscope（SEM） equipped with an energy dispersive spectrometer（EDS） system, Fourier transform infrared spectra（FT-IR）, and UV-visible diffuse reflectance spectroscopy（DRS）. The results show that the doping with Fe significantly promoted the light absorption ability of CaTiO3 in the visible light region. The Fe-doped CaTiO3 exhibited higher photocatalytic activity than CaTiO3 for the degradation of MB.However, the photocatalytic activity of the Fe-doped CaTiO3 was greatly influenced by the calcination temperature during the preparation process. The Fe-doped CaTiO3 prepared at500°C exhibited the best photocatalytic activity, with degradation of almost 100% MB（10 ppm）under UV-visible light for 180 min.     

Bi-PbO2电极电化学氧化去除模拟废水中氨氮的研究

本实验采用钛网作为基体,利用电沉积方法制备了纯PbO2电极和Bi-PbO2电极,通过SEM、XRD、XPS对电极的表面形态进行了表征,利用循环伏安法对Bi-PbO2电极电化学特性进行了研究.同时,以氨氮模拟废水作为研究对象,考察了Bi-PbO2电极的电催化活性,探讨了氨氮电化学氧化降解机理.结果表明,Bi-PbO2电极的形态表征、电催化活性明显高于纯PbO2电极,氨氮的去除效率随电流密度的增加而提高,碱性条件下氨氮的去除效果明显好于酸性条件,适量浓度的Cl-的引入在碱性条件下提高了氨氮的去除效果.当氨氮初始浓度为50 mg·L-1、电流密度为40 mA·cm-2、pH=12、Cl-浓度为600 mg·L-1时,电解120 min后,氨氮100%去除.氨氮的降解机理为:体系中无添加氯离子,酸性条件下氨氮主要是通过间接氧化去除,碱性条件下通过直接电氧化和间接氧化共同完成;体系中添加氯离子,氨氮的去除主要是通过溶液中生成的有效氯间接氧化去除.