工业废水催化湿式氧化处理的研究

采用系列贵金属-半导体氧化物催化剂,在高压釜中250℃液相条件下对焦化厂等工业废水以及由氨、吡啶等组成的模拟废水进行液相氧化试验。结果发现几种催化剂对不同污染物有不同序列的催化氧化活性,其净化作用有各自的选择性。WT-501催化剂对氨和有机污染物均有高活性,焦化废水经WT-501催化氧化处理后’COD、NH_3分別从9302mg/L和5230mg/L降至619mg/L和47mg/L,去除率高达93.2％和99％。     

密云水库底泥和库滨区土壤中氨氧化细菌的多样性和丰度

采用分子生物学方法（T-RFLP、定量PCR）研究了密云水库底泥沉积物和库滨带土壤中氨氧化细菌（AOB）的多样性和丰度特征,并使用Canoco for Windows 4.5软件和皮尔森相关系数法,探究了环境因子对AOB群落的影响.结果表明,沉积物和库滨区土壤中AOB的多样性和数量都存在较大的差异.其中,AOB群落被聚成两大类：沉积物与土壤.沉积物样品中AOB群落结构与其它样品差异较大.沉积物中AOB的多样指数最低,而在农田土壤中AOB多样性指数最高.农田土壤中的amoA基因拷贝数最大,是底泥沉积物中的48倍.此外,RDA（Redundancy Analysis）分析表明,在沉积物和水陆交错带土壤中,AOB的优势种与NH₄⁺-N、NO₃^--N、TOC、pH成正相关关系,而在陆相土壤和农田土壤中,AOB的优势种与这些环境因子成负相关关系.其中,TOC是影响AOB的群落结构的关键理化因子.     

g 辐照预处理促进剩余污泥发酵产氢的研究

为降低能耗,提高辐照技术的经济性,探讨了在0~9.5kGy范围内,γ辐照剂量对生活污水处理厂二沉池剩余污泥中耗氢菌的抑制效果和对发酵产氢的影响,建立了描述发酵产氢过程及辐照影响的动力学模型.结果表明,γ辐照剂量从0增加至9.5kGy时,污泥溶解率从0增加至4%,上清液中可检测出一定的蛋白质和多糖等物质,其中蛋白质中的氮素占溶出总氮素的90%,表明较低剂量辐照即对污泥菌体造成较明显的破解,这可在一定程度上抑制无法形成芽孢的耗氢菌活性;与之相对应的是污泥发酵产氢能力的明显提升,以葡萄糖为底物(1.0g/L),在35℃和初始pH值为7.0时,当辐射剂量仅为0.5kGy时,累积产氢量即比未辐照时有70%的提升,进一步增加辐照剂量至5kGy,累计产氢量和产氢得率均继续增长且达到最大值,分别为240mL/g葡萄糖和1.93mLH2/mol葡萄糖(发酵液的污泥量达2.0g VSS/L);此后,污泥发酵产氢能力随辐射剂量的增加而降低.修正的Logistic模型能很好地描述本研究中累积产氢量随时间的变化规律,而修正的Han-Levenspiel模型能很好地描述辐照剂量对平均产氢速率的影响.     

硝酸改性活性炭特征及其催化臭氧氧化性能

采用硝酸氧化对颗粒活性炭进行改性处理,研究了硝酸改性后活性炭结构和表面化学性质,及其对酸性大红3R的吸附能力和催化臭氧氧化去除效果的影响。结果表明,硝酸改性后,活性炭比表面积减小,微孔孔容减小,中孔孔容增大。活性炭表面以羧基为主的酸性含氧官能团随着硝酸改性浓度提高而显著增加,并对其吸附能力和催化臭氧氧化能力产生显著影响。硝酸改性活性炭吸附能力在碱性条件下由于表面酸性官能团和酸性大红3R之间的静电作用而有所降低;在酸性条件下由于二者的色散作用而增强。表面酸性官能团在碱性条件下参与臭氧分解,产生·OH,增强了硝酸改性活性炭对酸性大红3R的催化臭氧氧化去除效果。     

湖泊沉积物中氨氧化微生物的amoA基因数量

采用定量PCR方法测定了4个湖泊沉积物中氨氧化微生物的amoA基因数量,并分析了其与环境因子之间的关系. 结果表明:小南湖AOA(氨氧化古菌)和AOB(氨氧化细菌)的amoA基因数量最多,分别达2.1×104和2.8×103copies/g(以干质量计,下同);梁子湖仅检测到了AOA amoA基因的存在,平均值为4.9×103copies/g. 东湖和汤逊湖的AOA amoA基因数量比较接近,约为3.0×103copies/g,然而AOB的amoA基因数量在这2个湖泊中仅分别为37和86copies/g;在这些采样点中,AOA的amoA基因数量是AOB的3~278倍. 统计分析发现,随着湖泊营养水平和间隙水中ρ(NH₄+)的上升,AOA和AOB的amoA基因数量均呈增加趋势,但ρ(NH₄+)增加对AOB的促进作用要大于AOA,导致AOA和AOB的amoA基因数量比值与间隙水中ρ(NH₄+)呈显著负相关. pH上升对2类氨氧化微生物的抑制作用则与ρ(NH₄+)增加对它们的促进作用相反. 沉积物中amoA基因数量与间隙水中ρ(NO₂-)无显著相关性,但与ρ(NO₃-)呈显著正相关. 由于ρ(NH₄+)与ρ(DO)之间呈显著负相关,因此认为ρ(DO)与氨氧化微生物amoA基因数量之间的显著负相关可能更多的是对ρ(NH₄+)与氨氧化微生物amoA基因数量之间紧密关系的一种间接反应.      

OMS-2负载Pt催化剂的制备及其催化氧化性能研究

采用前掺杂法、沉积-沉淀法和浸渍法制备了氧化锰八面体分子筛(OMS-2)负载Pt催化剂(Pt/OMS-2),对所制催化剂进行了结构和织构表征。并研究了不同制备方法和沉积-沉淀法中不同制备(Pt负载量和溶液的pH值)对Pt/OMS-2催化氧化CO性能的影响。结果表明,沉积-沉淀法制备的Pt/OMS-2-DP催化剂活性最好(T100=100℃)。这与Pt/OMS-2-DP催化剂中Pt颗粒大小及OMS-2载体与Pt之间存在强相互作用有关。Pt负载量明显影响Pt/OMS-2-DP催化剂的催化活性,3Pt/OMS-2-DP催化剂(Pt=3.0 wt%)催化活性最高,这是由于适当Pt负载量,Pt颗粒较小,并与载体OMS-2的相互作用较强,能较好地活化OMS-2晶格氧。pH值对Pt/OMS-2-DP催化剂催化性能影响较大,这与OMS-2的等电点和Pt在不同溶液中存在不同Pt配位体形式有关。     

Effects of physical and chemical characteristics of surface sediments in the formation of shallow lake algae-induced black bloom

Surface sediments are closely related to lake black blooms. The dissolved oxygen （DO） distribution and its penetration depth in surface sediments as well as the migration and transformation of redox sensitive elements such as Fe and S at the sediment-water interface are important factors that could influence the formation of the black bloom. In this study, dredged and undredged sediment cores with different surface properties were used to simulate black blooms in the laboratory. The Micro Profiling System was employed to explore features of the DO and ∑H2S distribution at the sediment-water interface. Physical and chemical characteristics in sediments and pore waters were also analyzed. The results showed that sediment dredging effectively suppressed the black blooms. In the undredged treatment, DO penetration depth was only 50 μm. Fe^2＋ concentrations, ∑H2S concentrations, and ∑H2S production rates were remarkably higher in surface sediments and pore waters compared to control and dredged treatments. Furthermore, depletion of DO and accumulation of Fe^2＋ and ∑H2S in surface sediments and pore waters provided favorable redox environments and necessary material sources for the blooms. The study results proved that physical and chemical characteristics in surface sediments are important factors in the formation of the black bloom, and could provide scientific guidance for emergency treatment and long-term pre-control of black blooms.     

厌氧氨氧化工艺脱氮及其污泥形态的研究

为研究厌氧氨氧化工艺对高浓度含氮废水的脱氮性能,在以聚乙烯海绵作为填料的上流式厌氧固定床反应器中利用人工配置高浓度含氮废水进行了实验研究.实验中通过添加充足无机碳源,实现了厌氧氨氧化反应器在总氮浓度900～1 210 mg/L长期稳定的运行,脱氮效率在80％以上,最高氮负荷为5.9 kg/m3·d.结果表明:充足的无机碳源在一定程度上可有效地降低高浓度亚硝氮对厌氧氨氧化菌的抑制作用.通过对污泥性状的研究,明确寻找出污泥上浮的原因所在.通过Stover-Kincannon模型确定系统动力学参数KB和Umax分别为30.2 g/L·d和2L2g/L·d,这将有助于对该厌氧氨氧化系统各控制条件的有效调节和准确设定,也为日后应用于实际工程中提供重要的理论依据.     

Electrochemical and spectroscopic characteristics of dissolved organic matter in a forest soil profile

Dissolved organic matter （DOM） represents one of the most mobile and reactive organic compounds in ecosystem and plays an important role in the fate and transport of soil organic pollutants, nutrient cycling and more importantly global climate change. Electrochemical methods were first employed to evaluate DOM redox properties, and spectroscopic approaches were utilized to obtain information concerning its composition and structure. DOM was extracted from a forest soil profile with five horizons. Differential pulse voltammetry indicated that there were more redox-active moieties in the DOM from upper horizons than in that from lower horizons. Cyclic voltammetry further showed that these moieties were reversible in electron transfer. Chronoamperometry was employed to quantify the electron transfer capacity of DOM, including electron acceptor capacity and electron donor capacity, both of which decreased sharply with increasing depth. FT-IR, UV-Vis and fluorescence spectra results suggested that DOM from the upper horizons was enriched with aromatic and humic structures while that from the lower horizons was rich in aliphatic carbon, which supported the findings obtained by electrochemical approaches. Electrochemical approaches combined with spectroscopic methods were applied to evaluate the characteristics of DOM extracted along a forest soil profile. The electrochemical properties of DOM, which can be rapidly and simply obtained, provide insight into the migration and transformation of DOM along a soil profile and will aid in better understanding of the biogeochemical role of DOM in natural environments.     

Waste oyster shell as a kind of active filler to treat the combined wastewater at an estuary

Estuaries have been described as one of the most difficult environments on Earth. It is difficult to know how to treat the combined wastewater in tidal rivers at the estuary, where the situation is very different from ordinary fresh water rivers. Waste oyster shell was used as the active filler in this study in a bio-contact oxidation tank to treat the combined wastewater at the Fengtang Tidal River. With a middle-experimental scale of 360 ma/day, the average removal efficiency of COD, BOD, NH3-N, TP and TSS was 80.05%, 85.02%, 86.59%, 50.58% and 85.32%, respectively, in this bio-contact oxidation process. The living microbes in the biofilms on the waste oyster shell in this bio-contact oxidation tank, which were mainly composed of zoogloea, protozoa and micro-metazoa species, revealed that waste oyster shell as the filler was suitable material for combined wastewater degradation. This treatment method using waste oyster shell as active filler was then applied in a mangrove demonstration area for water quality improvement near the experiment area, with a treatment volume of 5 × 10^3 m^3/day. Another project was also successfully applied in a constructed wetland, with a wastewater treatment volume of 1 ×10^3 m^3/day. This technology is therefore feasible and can easily be applied on a larger scale,