连续流膜生物反应器中好氧颗粒污泥的形成及机制探讨

为了探讨好氧颗粒污泥在连续流膜生物反应器(MBR)中的形成过程和机制,采用连续流试验的方法,研究了好氧颗粒污泥形成过程中膜反应器内污染物的去除效果和好氧颗粒污泥特性的变化,并对连续流MBR中好氧颗粒污泥的形成机制进行了探讨.结果显示,连续流MBR中好氧颗粒污泥的形成增强了MBR的运行稳定性和抗冲击能力.废水中微生物抑制...     

利用PCR-DGGE溯源典型农村塘坝饮用水中的污染

以华南地区典型农村塘坝饮用水为研究对象,采用基于大肠杆菌的两种特异性基因(β-D-葡萄糖苷酶编码基因uidA和膜外周磷通道蛋白编码基因phoE)的群体差异分析(PCR-DGGE),对饮用水中的污染情况进行了溯源研究.结果表明,采用富集培养的混合菌体DNA作为模板扩增大肠杆菌特异性基因更加实用.uidA和phoE的引物均...     

高效去磷的膜生物反应器

目前,华盛顿州斯波坎市为达到北美最严格的磷出水浓度限值(季节平均值,总磷:50mg/L),需要设计一种区域性水体改造设备(WRF).该设备同时要求达到总氮为10mg/L、氨氮为0.25mg/L的浓度限值.该设备采用强化型初级处理装置,后部连接1个膜生物反应器系统,其中设有金属盐,用于去除磷.金属盐可以完全消除来自于颗粒处理系统中     

垃圾渗滤液的膜生物反应器与传统生物工艺述评

采用文献调研法比较评价了膜生物反应器与传统生物工艺对垃圾渗滤液的处理效果。结果表明,渗滤液的水质特征(主要指COD)主要由渗滤液年龄决定,B/C值和渗滤液年龄对COD去除有重要影响。传统生物处理常采用多级组合工艺,渗滤液特性、工艺单元数、水力停留时间和有机负荷率等是影响COD去除的重要参数。近年来,MBR工艺的应用日益广泛,对于B/C值较低的老龄渗滤液,MBR工艺可获得更好的COD去除效果,也有利于废水的膜深度处理。     

Chemical cleaning of fouled PVC membrane during ultrafiltration of algal-rich water

Cleaning of hollow-fibre polyvinyl chloride (PVC) membrane with di erent chemical reagents after ultrafiltration of algal-rich water was investigated. Among the tested cleaning reagents (NaOH, HCl, EDTA, and NaClO), 100 mg/L NaClO exhibited the best performance (88.4% 1.1%) in removing the irreversible fouling resistance. This might be attributed to the fact that NaClO could eliminate almost all the major foulants such as carbohydrate-like and protein-like materials on the membrane surface, as confirmed by Fourier transform infrared spectroscopy analysis. However, negligible irreversible resistance (1.5% 1.0%) was obtained when the membrane was cleaning by 500 mg/L NaOH for 1.0 hr, although the NaOH solution could also desorb a portion of the major foulants from the fouled PVC membrane. Scanning electronic microscopy and atomic force microscopy analyses demonstrated that 500 mg/L NaOH could change the structure of the residual foulants on the membrane, making them more tightly attached to the membrane surface. This phenomenon might be responsible for the negligible membrane permeability restoration after NaOH cleaning. On the other hand, the microscopic analyses reflected that NaClO could e ectively remove the foulants accumulated on the membrane surface.     

聚丙烯中空纤维膜吸收法烟气脱硫实验研究

采用质量分数为30%的甲基二乙醇胺(MDEA)水溶液为烟气SO2吸收液,聚丙烯(PP)中空纤维微孔膜组件为吸收器,研究吸收液温度、流量变化,气体停留时间,以及气液两相流程等操作条件对聚丙烯(PP)中宅纤维膜脱硫率的影响,研究表明30%MDEA水溶液在温度35℃,流量100mL/min的最佳试验条件下,经过一个膜吸收过程...     

Catalytic bubble-free hydrogenation reduction of azo dye by porous membranes loaded with palladium nanoparticles

Catalytic bubble-free hydrogenation reduction of azo dye by porous membranes loaded with palladium （Pd） nanoparticles was studied for the first time. The effects of Pd loading, dye concentration and reuse repetitions of membranes were investigated. In reduction, the dye concentration decreased whereas the pH rose gradually. An optimal Pd loading was found. The catalytic membranes were able to be reused more than 3 times.     

曝气强度对膜生物反应器处理石化废水工艺运行特征的影响

采用膜生物反应器(Membrane Bioreactor,MBR)处理石化废水,研究曝气强度分别为1.50,3.00 m3/(m2·h)的条件下,MBR对石化废水中主要污染物的去除特征、跨膜压差(Trans Membrane Pressure,TMP)和混合液性质的变化特征。结果表明:在两种曝气强度条件下MBR对COD、NH+4-N及挥发酚等污染物的平均去除率分别为80.74%、80.23%、96.79%和97.55%、99.34%、98.84%,即在不同曝气条件下,曝气强度的变化对MBR的污染物去除性能无显著影响。但随着曝气强度由1.50 m3/(m2·h)增加到3.00 m3/(m2·h),MBR达到设定的最大跨膜压差(TMPMax=25k Pa)的运行时间由11.8 d增加到31.4 d,TMP上升速率降低。通过活性污泥颗粒粒径分析发现:增加曝气强度后,对膜污染影响显著的活性污泥颗粒粒径范围(0~2μm)所占体积比由2.10%减小到1.78%;并且混合液中溶解性微生物产物(soluble microbial product,SMP)和胞外聚合物(extracellular polymeric substance,EPS)质量浓度分别由24.07 mg/L和15.66 mg/g减小到15.14 mg/L和9.81 mg/g,从而降低了膜污染速率。     

Inhibitory effects of nisin-coated multi-walled carbon nanotube sheet on biofilm formation from Bacillus anthracis spores

Multi-walled carbon nanotube（MWCNT） sheet was fabricated from a drawable MWCNT forest and then deposited on poly（methyl methacrylate） film. The film was further coated with a natural antimicrobial peptide nisin. We studied the effects of nisin coating on the attachment of Bacillus anthracis spores, the germination of attached spores, and the subsequent biofilm formation from attached spores. It was found that the strong adsorptivity and the super hydrophobicity of MWCNTs provided an ideal platform for nisin coating. Nisin coating on MWCNT sheets decreased surface hydrophobicity, reduced spore attachment, and reduced the germination of attached spores by 3.5 fold, and further inhibited the subsequent biofilm formation by 94.6% compared to that on uncoated MWCNT sheet. Nisin also changed the morphology of vegetative cells in the formed biofilm.The results of this study demonstrated that the anti-adhesion and antimicrobial effect of nisin in combination with the physical properties of carbon nanotubes had the potential in producing effective anti-biofilm formation surfaces.     

Fouling distribution in forward osmosis membrane process

Fouling behavior along the length of membrane module was systematically investigated by performing simple modeling and lab-scale experiments of forward osmosis （FO） membrane process. The flux distribution model developed in this study showed a good agreement with experimental results, validating the robustness of the model. This model demonstrated, as expected, that the permeate flux decreased along the membrane channel due to decreasing osmotic pressure differential across the FO membrane. A series of fouling experiments were conducted under the draw and feed solutions at various recoveries simulated by the model. The simulated fouling experiments revealed that higher organic （alginate） fouling and thus more flux decline were observed at the last section of a membrane channel, as foulants in feed solution became more concentrated. Furthermore, the water flux in FO process declined more severely as the recovery increased due to more foulants transported to membrane surface with elevated solute concentrations at higher recovery, which created favorable solution environments for organic adsorption. The fouling reversibility also decreased at the last section of the membrane channel, suggesting that fouling distribution on FO membrane along the module should be carefully examined to improve overall cleaning efficiency. Lastly, it was found that such fouling distribution observed with co-current flow operation became less pronounced in counter- current flow operation of FO membrane process.