山苍籽油抑制黑曲霉生长的细胞学机制

采用电镜、多维显微、快速显微图像分析，并与计算机技术相结合，研究天然山苍籽香精油抗黑曲霉的机理，获得了单纯使用光学显微镜或电镜难以获得的结果，表明该香精油能直接通过损伤黑曲霉质膜，改变其膜的物理参数和选择通透性而进入细胞，诱发细胞的一系列因素，从而导致孢子失去萌发力，并抑制菌丝体生长．图2表1参12     

臭氧降解乐果机理探讨

研究了臭氧对乐果的降解效果及其影响因素。试验结果表明,当初始臭氧浓度为10mg·L-1时,5min内可使乐果降解80%左右,延长反应时间,乐果降解率无明显增加。同时,通过在乐果和臭氧的反应液中再分别添加重碳酸盐与叔丁醇,探讨臭氧降解乐果的反应机理,结果表明臭氧降解乐果是分子反应。GC-MS检测经臭氧处理的水样发现有氧化乐果存在,表明若臭氧处理不完全,水样中可产生毒副产物。     

镍钴矿区放射性的水平调查与研究及危害防治

以镍钴矿区放射性水平调查结果为依据,对镍钴矿区氡子体的赋存规律、析出方式、放射性水平及致病机理进行了探讨,并提出了防治建议。     

KROFTA气浮装置在原理上的三大突破：浅池理论,零速原理,新溶气机理

本文针对代表气浮净水技术最新发展的ＫＲＯＦＴＡ气浮装置,对比着传统气浮装置,就池深,进出水扰动,溶气机理等方面进行了较为系统的理论总结和提高,对指导气浮净水装置的发展很有寿命。     

黄河循化—贵南段两种地方病与水文地质环境的关系初探

黄河上游两岸广泛分布着甲状腺肿与地方性氟病,经过调查分析,这两种地方病是在特定的水文地质环境中形成的,合理利用地下水是解决这两种地方病的有效途径     

复合型人工湿地对抚仙湖入湖河道污水中氮的去除

在抚仙湖北岸构建复合型人工湿地污水处理系统,对窑泥沟入湖河道污水中氮的去除效果进行了试验研究,结果表明,系统水力负荷年平均为37mm/d,氮负荷年平均为3.315g/m2·d,对污水中NOx、NH+4、TON和TN去除率年平均分别为62.7%、53.8%、62.4%和57.5%.     

淹没式曝气生物滤池脱氮除磷工艺的运行调试

根据昆山市中华园城市污水站的实际调试经验，探讨了曝气生物滤池工艺对进水浓度、混凝预处理、尾气预曝气、DO、反冲洗周期和强度等工艺参数的不断调整和控制，并总结出较佳的运行参数，具有一定的实际运行指导作用。     

废水的生物脱氮除磷新工艺的设想

结合废水生物脱氮除磷机理和影响因素，在对几种典型脱氮除磷工艺氮、磷去除率进行比较的基础上，解析了一些典型工艺除氮除磷不足之处。根据重庆城市污水水质实际情况和地形的特点，设想一种新的生物脱 氮除磷工艺，从而弥补传统工艺的不足。可望提高系统的脱氮和除磷效率，达到更好的脱氮除磷的目的，减少对水体的污染。     

中小型燃煤陶瓷窑炉烟气治理技术

介绍了一种针对中小型燃煤陶瓷窑炉烟气的治理方案。该方案通过采用自成型型煤作燃料，多管旋风除尘器和湍流塔消烟除尘，采用双碱法及往吸收液中加入活性剂等措施，除去烟气中的粉尘，SOx,NOx等，进而达标排放。     

Laboratory scale studies on removal of chromium from industrial wastes

Chromium being one of the major toxic pollutants is discharged from electroplating and chrome tanning processes and is also found in the effluents of dyes,paint pigments,manufacturing units etc.Chromium exists in aqueous systems in both trivalent(Cr^3 )and hexavalent (Cr^6 )forms.The hexavalent form is carcinogenic and toxic to aquatic life,whereas Cr^3 is however comparatively less toxic.This study was undertaken to investigate the total chromium removal from industial effluents by chemical means in order to achieve the Pakistan NEQS level of 1 mg/L by the methods of reduction and precipitation.The study was conducted in four phase Ⅰ,the optimum pH and cost effective reducing agent among the four popular commercial chemicals was selected.As a result,pH of 2 was found to be most suitable and sodium meta bisulfate was found to be the most cost effective reducing agent respectively.Phase Ⅱ showed that lower dose of sodium meta hisulfate was sufficient to obtain 100% efficiency in reducing Cr^6 to Cr^3 ,and it was noted that reaction time had no significance in the whole process.A design curve for reduction process was established which can act as a tool for treatment of industrial effluents.Phase Ⅲ studies indicated the best pH was 8.5 for precipitation of Cr^3 to chromium hydroxide by using lime.An efficiency of 100% was achievable and a settling time of 30 minutes produced clear effluent.Finally in Phase Ⅳ actual waste samples from chrome tanning and electroplating industries,when precipitated at pH of 12 gave 100% efficiency at a settling time of 30 minutes and confirmed that chemical means of reduction and precipitation is a feasible and viable solution for treating chromium wastes from industries.