菌株Desulfovibrio sp. CMX的DNRA性能和影响因素

微生物的硝酸盐异化还原为铵(DNRA)过程对自然界中铵根离子的存在和转化具有重要影响,然而关于SRB菌株DNRA过程影响和机制尚未探明.本文考察了实验室筛选的SRB菌株Desulfovibrio sp.CMX的DNRA能力、影响因素及其影响机制.结果表明,无外加氮源的情况下,分别以10 mmol·L-1NO_3~-和NO_2~-作为唯一电子受体,菌株Desulfovibrio sp.CMX最终NH_4~+生成率分别达到85.8%和97.3%,且无N2和N2O等副产物产生.实验探究了不同外加氮源、不同初始浓度的SO_4~(2-)、S~(2-)对菌株DNRA过程的影响.酵母浸粉作为外加氮源可促进菌株的生长和代谢从而促进菌株DNRA过程;SO_4~(2-)对于NO_3~-还原为NO_2~-阶段起促进作用,而对NO_2~-还原为NH_4~+阶段起抑制作用,综合两方面影响,最终表现出对菌株DNRA过程的抑制作用;S~(2-)对菌株生长及DNRA过程都表现出抑制作用,且S~(2-)浓度越高抑制作用越强,当S~(2-)浓度达到6 mmol·L-1后,S~(2-)对于NO_3~-还原为NO_2~-阶段的抑制作用强于NO_2~-还原为NH_4~+阶段的抑制作用,NO_3~-还原为NO_2~-速率低于NO_2~-还原为NH_4~+速率,此时体系中不再有NO_2~-的积累.     

纳米零价铁铜双金属对铬污染土壤中Cr(Ⅵ)的还原动力学

采用液相还原法制备纳米零价铁铜双金属(n ZVI/Cu),通过扫描电子显微镜(SEM)和X射线衍射(XRD)对其进行形貌观测和表征分析,用制备的n ZVI/Cu修复Cr(Ⅵ)污染的土壤,研究了不同反应条件对修复效果的影响,探讨了还原动力学规律.结果表明,n ZVI/Cu对土壤中的Cr(Ⅵ)有很好的降解效果,反应初始p H为7,温度为30℃时,加入2 g·L~(-1)的n ZVI/Cu材料,在10 min内Cr(Ⅵ)含量为88 mg·kg~(-1)的污染土壤中的Cr(Ⅵ)去除率可以达到99%以上.改变n ZVI/Cu加入量、p H值、反应温度以及添加腐殖酸都会对Cr(Ⅵ)的去除效果产生影响.改变p H值和反应温度对去除土壤中Cr(Ⅵ)的影响都比较明显,p H值越小,反应温度越高Cr(Ⅵ)的去除效果越好,添加腐殖酸对去除土壤中的Cr(Ⅵ)有一定的影响.n ZVI/Cu降解Cr(Ⅵ)的过程符合伪一级还原动力学模型,还原速率与反应温度的关系符合阿仑尼乌斯(Arrhenius)定律,反应活化能Ea为104.26 k J·mol~(-1).     

废旧线路板中主要有价金属的生物反应器浸出研究

为探讨可供实际生物浸出应用的反应器规模废旧线路板中有价金属浸出特性和工艺条件,通过设计序批式生物浸出反应器,采用分离到的氧化亚铁硫杆菌Z1作为菌种资源,在考察废旧线路板中有价金属的浸出特性的基础上,确定了反应器运行的最佳工艺条件.结果表明,反应器运行的最佳工艺条件为曝气量1L/min、停留时间30h、搅拌速率300r/min以及粉末投加量12g/L.在此条件下,经过101h可以浸出90.24%的铜.同时,经197h的浸出,可以溶出93.06%的镁、92.00%的锌、85.59%的铝和64.51%的镍.因此,生物浸出反应器能有效回收废旧线路板中的有价金属,为该技术的实际应用提供了实验证据.     

响应面法优化厌氧上清液除磷的研究

在用铁盐对厌氧段富磷上清液进行化学磷沉淀以实现磷的回收和达标排放的SBR系统中,为了减少铁盐化学除磷残余物可能对生物处理系统的影响,采用Box-Benhnken中心组合试验原理和响应面分析法,选择Fe:P、混凝搅拌强度、絮凝搅拌强度、搅拌时间等为自变量,残余铁离子为响应值,研究自变量之间的交互作用,以期优化化学除磷条件.通过Design-Expert 8.0软件得到1个二次响应曲面模型.得出最佳除磷条件:Fe:P比为1.40:1,搅拌强度为275r/min,快速搅拌时间为30s,絮凝搅拌强度为60r/min,絮凝时间为18min,沉淀时间为20min.在此条件下,化学混凝后残余铁离子浓度为0.37mg/L,化学除磷率大于97.66%.     

催化还原法净化处理氮氧化物的工程实例

针对不锈钢产品酸洗处理过程中产生的氮氧化物浓度高、对大气污染的影响大、且难于净化治理等特性,在上海某不锈钢项目中设计了一套酸雾净化系统。该设计解决了酸洗中产生的氮氧化物难以净化的问题,提升了氮氧化物处理技术,它将成为不锈钢酸洗行业中氮氧化物净化处理技术的发展方向。     

Debromination of decabromodiphenyl ether by organo-montmorillonite-supported nanoscale zero-valent iron：Preparation, characterization and influence factors

An organo-montmorillonite-supported nanoscale zero-valent iron material(M-NZVI) was synthesized to degrade decabromodiphenyl ether(BDE-209). The results showed that nanoscale zero-valent iron had good dispersion on organo-montmorillonite and was present as a core-shell structure with a particle size range of nanoscale iron between 30–90 nm, characterized by XRD, SEM, TEM, XRF, ICP-AES, and XPS. The results of the degradation of BDE-209 by M-NZVI showed that the efficiency of M-NZVI in removing BDE-209 was much higher than that of NZVI. The efficiency of M-NZVI in removing BDE-209 decreased as the pH and the initial dissolved oxygen content of the reaction solution increased, but increased as the proportion of water in the reaction solution increased.     

Catalytic bubble-free hydrogenation reduction of azo dye by porous membranes loaded with palladium nanoparticles

Catalytic bubble-free hydrogenation reduction of azo dye by porous membranes loaded with palladium （Pd） nanoparticles was studied for the first time. The effects of Pd loading, dye concentration and reuse repetitions of membranes were investigated. In reduction, the dye concentration decreased whereas the pH rose gradually. An optimal Pd loading was found. The catalytic membranes were able to be reused more than 3 times.     

Efficacy of two chemical coagulants and three different filtration media on removal of Aspergillus flavus from surface water

Aquatic fungi are common in various aqueous environments and play potentially crucial roles in nutrient and carbon cycling as well as interacting with other organisms. Species of Aspergillus are the most common fungi that occur in water. The present study was undertaken to elucidate the efficacy of two coagulants, aluminum sulfate and ferric chloride, used at different concentrations to treat drinking water, in removing Aspergillusflavus, as well as testing three different filtration media： sand, activated carbon, and ceramic granules, for their removal of fungi from water. The results revealed that both coagulants were effective in removing fungi and decreasing the turbidity of drinking water, and turbidity decreased with increasing coagulant concentration. Also, at the highest concentration of the coagulants, A. flavus was decreased by 99.6% in the treated water. Among ceramic granules, activated carbon, and sand used as media for water filtration, the sand and activated carbon filters were more effective in removing A.flavus than ceramic granules while simultaneously decreasing the turbidity levels in the test water samples. Post-treatment total organic carbon （TOC） and total nitrogen （TN） concentrations in the experimental water did not decrease; on the contrary, TN concentrations increased with the increasing dosage of coagulants. The filtration process had no effect in reducing TOC and TN in tested water.     

Antimony smelting process generating solid wastes and dust：Characterization and leaching behaviors

A large amount of solid waste has been produced by the antimony smelting process in the＂World Capital of Antimony＂, Xikuangshan area in China. This study comprehensively investigated the physical and chemical characteristics of the various solid wastes, as well as the leaching behavior of the solid wastes, which included water-quenched slag,arsenic-alkali residue, desulfurized slag and blast furnace dust. These four types of waste were enriched in a variety of heavy metals and metalloids and more specifically with As and Sb levels up to 8.6 × 104 and 3.16 × 105mg/kg, respectively, in arsenic-alkali residue. For desulfurized slag and water-quenched slag, the leaching concentration of Sb significantly exceeded the acceptable limits during the leaching tests using the toxicity characteristic leaching procedure and the synthetic precipitation leaching procedure. In addition, As leaching in arsenic-alkali residue was extraordinarily hazardous, being three orders of magnitude higher than the regulatory level of As. According to the results of the extraction tests, all the tested wastes were classified as hazardous waste.     

Photocatalytic activity of Fe-doped CaTiO3 under UV-visible light

The photocatalytic degradation of methylene blue（MB） over Fe-doped CaTiO3 under UV-visible light was investigated. The as-prepared samples were characterized using X-ray diffraction（XRD）, scanning electron microscope（SEM） equipped with an energy dispersive spectrometer（EDS） system, Fourier transform infrared spectra（FT-IR）, and UV-visible diffuse reflectance spectroscopy（DRS）. The results show that the doping with Fe significantly promoted the light absorption ability of CaTiO3 in the visible light region. The Fe-doped CaTiO3 exhibited higher photocatalytic activity than CaTiO3 for the degradation of MB.However, the photocatalytic activity of the Fe-doped CaTiO3 was greatly influenced by the calcination temperature during the preparation process. The Fe-doped CaTiO3 prepared at500°C exhibited the best photocatalytic activity, with degradation of almost 100% MB（10 ppm）under UV-visible light for 180 min.