直接大红4BE的磷钨酸均相光催化还原脱色

以磷钨酸(H3PW12O40,PW12)为光催化剂,异丙醇(Isopropanol)作为电子给体的条件下对偶氮染料直接大红4BE进行均相光催化还原脱色研究,考察PW12用量、IS浓度、直接大红4BE和盐浓度等因素的影响,结果表明杂多蓝(PW1-2)对直接大红4BE具有明显的还原脱色作用.pH=2.0,直接大红4BE初始浓度50 mg·L-1,PW12浓度为600 mg·L-1,IS浓度为0.13mol·L-1,50 min直接大红4BE的脱色率可达到90.39%.4BE的光催化还原脱色速率随PW12和IS浓度的增加而增加,最后趋于恒定;直接大红4BE初始浓度增加,其光反应一级速率常数降低;PW12、IS和4BE浓度之间存在交互影响.离子强度增加,4BE脱色速率减小,表现为负的盐效应,推测4BE与光反应生成的杂多蓝(PW1-2)进行复合,然后发生电子转移引起偶氮染料还原脱色和杂多蓝氧化复原.本研究结果表明PW12/IS/UV能够有效用于偶氮染料直接大红4BE的还原脱色处理.     

Ethyl thiosemicarbazide intercalated organophilic calcined hydrotalcite as a potential sorbent for the removal of uranium(VI) and thorium(IV) ions from aqueous solutions

This work was conducted to determine the practicability of using a new adsorbent 4-ethyl thiosemicarbazide intercalated,organophilic calcined hydrotalcite(ETSC-OHTC) for the removal of uranium(U(VI)),and thorium(Th(IV)) from water and wastewater.The FTIR analysis helped in realizing the involvement of nitrogen and sulphur atoms of ETSC in binding the metal ions through complex formation.Parameters like adsorbent dosage,solution pH,initial metal ions concentration,contact time and ionic strength,that influence adsorption phenomenon,were studied.The optimum pH for maximum adsorption of U(VI) and Th(IV) was found to be in the range 4.0-6.0.The contact time required for reaching equilibrium was 4 hr.The pseudo second-order kinetic model was the best fit to represent the kinetic data.Analysis of the equilibrium adsorption data using Langmuir,Freundlich and Sips models showed that the Freundlich model was well suited to describe the metal ions adsorption.The K F values were 25.43 and 29.11mg/g for U(VI) and Th(IV),respectively,at 30°C.The adsorbent can be regenerated effectively from U(VI) and Th(IV) loaded ones using 0.01mol/L HCl.The new adsorbent was quite stable for many cycles,without much reduction in its adsorption capacity towards the metals.     

钢渣湿法捕获CO_2反应机制研究

以炼钢过程中排放的固体废弃物钢渣为碳捕获剂,进行了钢渣湿法捕获烟气CO2工艺的实验研究。通过分析钢渣的组成成份及反应机理,研究液固比、反应温度、反应时间、pH值及反应产物等主要参数对钢渣湿法碳捕获状况的影响。实验证明,通过合理的设计和适当的操作,可使钢渣湿法碳捕获效率达60%以上,具有一定的应用价值。     

关于不锈钢酸洗废水处理的技术分析

随着社会经济的快速发展,不锈钢酸洗废水处理技术成为了当前的一项重要技术参数。本文旨在分析当前不锈钢酸洗废水的相关处理技术,从多种技术综合的应用出发,围绕当前工业发展的实际需要,多角度的分析不锈钢酸洗废水的技术,实现整体技术的全面运用。     

Application of CGP-cross route process for microstructure refinement and mechanical properties improvement in steel sheets

A modified method of severe plastic deformation (SPD) entitled constrained groove pressing-cross route (CGP-CR) was introduced for imposing a high magnitude of equivalent strain of about 2.32 per pass on the sheet form samples. The major benefit of this improved route compared to previous common route was the more homogeneity of strain in the rolling (RD) and transverse (TD) directions of sheets. In this study, low carbon steel samples were used for examination of evolutions in microstructure and mechanical properties during SPD via CGP-CR process. Mechanical properties improvement were measured by tensile and macro hardness tests. The results indicate that CGP-CR process can effectively improve tensile strength; and also, yield stress and hardness of as-received low carbon steel samples were improved up to about 100% after two deformation passes. Also, high magnitude of inhomogeneity can be observed in hardness distribution through first pass of the process which diminishes in the subsequent passes. Microstructural evolutions during process were monitored by optical microscopy observations and X-ray diffraction analysis. The results demonstrate that initial ferritic microstructure with grain size of about 30 μm was refined to a 225 nm cell structure after two passes of CGP-CR process.     

添加H2O2加速低合金钢海水腐蚀的主要影响因素研究

采用极化曲线、旋转圆盘电极试验和失重（质量损失）法研究了低合金钢在添加了H。o：的海水中腐蚀加速的主要影响因素。结果发现低合金钢在添加H2O2的海水中腐蚀加速主要受到了H2O2浓度、温度、搅拌速度和H2O2添加周期的影响。研究表明,搅拌速度不变、H2O2添加周期相同的条件下,在H2O2浓度为0．8mol／L的70℃海水中,低合金铜的腐蚀加速最显著;在试验的转速范围内,加速作用随搅拌速度增大变得更为显著;H2O2加入后350min内加速作用较明显。     

温室气体的“源”与“汇”及其防治对策

从"源"与"汇"理论入手,分析大气中四种主要温室气体CO2、CH4、N2O和CFCs的"源"与"汇",并提出相应防治对策。     

华南沿海某大气背景点黑碳气溶胶污染特征

黑碳气溶胶(BC)因其显著的气候效应和对人类健康的危害而成为研究的热点。研究背景点位BC的浓度水平和来源特征有助于掌握BC在区域尺度上的辐射强迫特性和环境影响。2009年秋季在华南沿海某区域大气背景点进行了为期约40 d的BC在线观测。观测期间BC的平均浓度为(2.34±1.33)μg/m3,与其它区域背景点相比处于较高水平。利用中尺度天气研究和预报系统WRF模拟的高分辨率三维气象场数据驱动HYSPLIT-4反向轨迹模式,模拟观测期间每小时的气团轨迹,将所有轨迹分为来源特征明显的东北沿海、北方内陆、香港方向和东南海面方向四类。当受到东北沿海来源气团影响时,BC的浓度为平均水平的1.4倍,BC和CO有较好的线性相关关系,而其它三类气团影响时的BC浓度都低于平均浓度,且BC和CO的相关关系很差,说明来自东北沿海地区的较近距离区域传输是影响该背景点大气BC的主要源区。     

抗滑桩细观受力特征的数值模拟研究

抗滑桩是滑坡防治工程中一种非常有效的支挡措施,其受力特征直接关系到滑坡防治效果,因此开展抗滑桩细观受力特征的数值模拟研究具有重要的工程应用价值。基于有限元数值模拟方法,采用ANSYS软件中的分离式模型,以SOLID65单元和LINK8单元分别模拟钢筋混凝土抗滑桩中的混凝土和钢筋,研究了不同荷载作用下抗滑桩的细观受力特征。结果表明:在相同荷载作用下,抗滑桩在高度较小阶段,其高度与抗滑桩的变形呈非线性变化,随着抗滑桩高度的增加,其高度与抗滑桩的变形趋于线性关系;有限元数值模拟能较好地反映钢筋混凝土抗滑桩的细观受力特征。该研究可以为抗滑桩工程的设计提供借鉴与参考。     

火灾下钢框架结构热-力耦合模拟与性能分析

基于"自然火灾安全概念"(NFSC)的基本思想,提出了火灾下钢结构热-力耦合模拟方法。利用ANSYS的参数化设计语言,建立了ANSYS软件与OZone火灾分析软件的数据接口,实现了火灾分析软件与大型有限元软件的耦合运用。基于火灾模拟软件OZone的分析结果,利用APDL语言,对钢框架结构进行了真实火灾场景下的热-力耦合模拟。研究表明:钢框架结构在真实火灾场景下,受非均匀变热流影响,结构内部将产生热应力梯度和应力牵移现象;同时钢框架中钢梁固接时,火灾初期变形较小,当达到某个关键时间点后将开始大的变形破坏,其主要原因是钢框架内部产生塑性铰,即钢梁由固接变为铰接,释放了对钢梁的约束。