二氧化铅电极的制备、表征及其电催化性能研究

以电沉积法制备了Ti/PbO2和Ti/MnO2/PbO22种电极.采用SEM、XRD和XPS等分析方法表征了电极的形貌、元素组成及元素化学态,并以罗丹明B为目标有机物,考察了所制备电极的析氧极化曲线和电催化活性以及Ti/MnO2/PbO2电极的循环伏安曲线.研究结果表明,Ti/MnO2/PbO2电极的稳定性、使用寿命、析氧电位和电催化活性较Ti/PbO2电极都有所提高,并且罗丹明B在Ti/MnO2/PbO2电极上的反应主要发生在析氧反应区,且反应不可逆.     

溶胶凝胶法制备磷钨酸掺杂TiO2薄膜及其光催化性能

以钛酸四丁酯为前驱物,采用溶胶凝胶法制备了磷钨酸掺杂的二氧化钛薄膜。通过XRD、FT-TR对该薄膜进行了表征,研究了薄膜在对氯苯酚光降解中的催化活性。结果表明,当磷钨酸与二氧化钛摩尔比为0.01∶1、薄膜烧结温度600℃、对氯苯酚溶液浓度30 mg/L（pH＝5）、光催化8 h的条件下,对氯苯酚的降解率超过90%,且薄膜可以重复使用。磷钨酸对二氧化钛的光催化活性具有明显的促进作用。     

超临界CO2回收线路板工艺研究

采用正交试验设计进行了超临界CO₂回收废弃印刷线路板的实验。以温度、压强、时间和夹带剂为实验因素,通过对实验前后样本在重量、厚度、弯曲强度和断裂强度四方面变化的分析考察了各实验因素对实验效果的影响。实验结果表明,影响超临界CO₂法回收印刷线路板的最主要因素为温度、时间和夹带剂,超临界CO₂法回收废弃印刷线路板的最佳工艺条件：温度270℃,压强大于7.38 MPa,时间3 h,夹带剂(水)160 mL。实验进一步验证了压强对实验结果的非显著性影响。     

Mixing-controlled biodegradation in a toluene plume--results from two-dimensional laboratory experiments

Various abiotic and biotic processes such as sorption, dilution, and degradation are known to affect the fate of organic contaminants, such as petroleum hydrocarbons in saturated porous media. Reactive transport modeling of such plumes indicates that the biodegradation of organic pollutants is, in many cases, controlled by mixing and therefore occurs locally at the plume's fringes, where electron donors and electron-acceptors mix. Herein, we aim to test whether this hypothesis can be verified by experimental results obtained from aerobic and anaerobic degradation experiments in two-dimensional sediment microcosms. Toluene was selected as a model compound for oxidizable contaminants. The two-dimensional microcosm was filled with quartz sand and operated under controlled flow conditions simulating a contaminant plume in otherwise uncontaminated groundwater. Aerobic degradation of toluene by Pseudomonas putida mt-2 reduced a continuous 8.7 mg L(-1) toluene concentration by 35% over a transport distance of 78 cm in 15.5 h. In comparison, under similar conditions Aromatoleum aromaticum strain EbN1 degraded 98% of the toluene infiltrated using nitrate (68.5+/-6.2 mg L(-1)) as electron acceptor. A major part of the biodegradation activity was located at the plume fringes and the slope of the electron-acceptor gradient was steeper during periods of active biodegradation. The distribution of toluene and the significant overlap of nitrate at the plume's fringe indicate that biokinetic and/or microscale transport processes may constitute additional limiting factors. Experimental data is corroborated with results from a reactive transport model using double Monod kinetics. The outcome of the study shows that in order to simulate degradation in contaminant plumes, detailed data sets are required to test the applicability of models. These will have to deal with the incorporation of existing parameters coding for substrate conversion kinetics and microbial growth.     

Heavy metal contamination in the vicinity of an industrial area near Bucharest

BACKGROUND, AIMS AND SCOPE: Chromium enters into the aquatic environment as a result of effluent discharge from steel works, electroplating, leather tanning industries and chemical industries. As the Cr(VI) is very harmful to living organisms, it should be quickly removed from the environment when it happens to be contaminated. Therefore, the aim of this laboratory research was to develop a rapid, simple and adaptable solvent extraction system to quantitatively remove Cr(VI) from polluted waters. METHODS: Aqueous salt-solutions containing Cr(VI) as CrO4(2-) at ppm level (4-6 ppm) were prepared. Equal volumes (5 ml) of aqueous and organic (2-PrOH) phases were mixed in a 10 ml centrifuge tube for 15 min, centrifuged and separated. Concentrations of Cr(VI), in both the aqueous and organic phases, were determined by atomic absorption spectrometry. The effects of salt and acid concentrations, and phase-contact time on the extraction of Cr(VI) were investigated. In addition, the extraction of Cr(VI) was assessed in the presence of tetramethylammonium chloride (TMAC) in 2-PrOH phase. Effects of some other metals, (Cd(II), Co(II), Cu(II), Ni(II) and Zn(II)), on the extraction of Cr(VI) were also investigated. RESULTS AND DISCUSSION: The Cr(VI) at ppm level was extracted quantitatively by salting-out the homogeneous system of water and 2-propanol(2-PrOH) using chloride salts, namely CaCl2 or NaCl, under acidic chloride media. The extracted chemical species of Cr(VI) was confirmed to be the CrO3Cl-. The ion-pair complex extracted into the organic phase was rationalized as the solvated ion-pair complex of [2-PrOH2+, CrO3Cl-]. The complex was no longer stable. It implied the reaction between extracted species. Studies revealed that salts and acid directly participated in the formation of the above complex. Use of extracting agents (TMAC) didn't show any significant effect on the extraction of Cr(VI) under high salting-out conditions. There is no significant interference effect on the extraction of Cr(VI) by the presence of other metals. The Cr(VI) in the organic phase was back-extracted using an aqueous ammonia solution (1.6 mol dm(-3)) containing 3 mol dm(-3) NaCl. The extraction mechanism of Cr(VI) is also discussed. CONCLUSIONS: Salting-out of homogeneous mixed solvent of 2-propanol can be employed to extract Cr(VI) quantitatively, as an ion-pair of [2-PrOH2+ * CrO3Cl-] solvated by 2-PrOH molecules. Then, the complex becomes 'solvent-like' and is readily separated into the organic phase. The increase of Cl- ion concentration in the aqueous phase favors the extraction. The 2-PrOH, salts and acid play important roles in the extraction process. There is no need to use an extracting agent at a high salting-out condition. RECOMMENDATIONS AND PERSPECTIVES: Chromium(VI) must be quickly removed before it enters into the natural cycle. As the 2-PrOH is water-miscible in any proportion, ion-pairing between 2-PrOH2+ and CrO3Cl- becomes very fast. As a result, Cr(VI) can easily be extracted. Therefore, the method is recommended as a simple, rapid and adaptable method to quickly separate Cr(VI) from aqueous samples.     

湖州市埭溪镇污水处理厂的工程设计

湖州市埭溪镇污水处理厂的设计规模,近期为2万m^2／d,远期为3万m^2／d,其污水处理工艺采用改良式A^2／O工艺,污泥处理工艺采用带式浓缩脱水一体机。文中着重介绍了工程设计参数、处理工艺流程及其设计特点。     

Degradation characteristics and metabolic pathway of 4-nitrophenol by a halotolerant bacterium Arthrobacter sp. CN2

Arthrobacter sp. strain CN2, capable of degrading 4-nitrophenol, was isolated from activated sludge. Degradation of 4-nitrophenol was optimized at pH 7.7, 30?°C, and 0.53% of glucose. Salt tolerance of 4-nitrophenol degradation was as high as 6% (w/v). Several biodegradation intermediates were identified and quantified by high-performance liquid chromatography and mass spectrometry. 4-Nitrocatechol is involved in the degradation of 4-nitrophenol by CN2. Scale-up of 4-nitrophenol degradation was conducted in a bioreactor with different salinity. When the salinity was below 7%, the degradation rate of 4-nitrophenol was above 90% (100 mg L^?1, 3 L).     

纳米硫化镉对A549细胞的损伤研究

研究纳米硫化镉(Nano-Cd S)材料对肺癌细胞系A549的毒性及氧化损伤作用。培养A549细胞,经传代后接种于6孔板中,每孔2 m L完全培养基,接种次日进行染毒。用直径20~30 nm、长度80~100 nm的Nano-Cd S进行染毒,染毒浓度分别为0、5、10、20、40和80 mg·L~(-1)。染毒24 h后用MTT检测细胞存活率,以存活率在80%左右的浓度为后续实验染毒浓度。应用流式细胞技术,用荧光探针法检测A549细胞的活性氧(reactive oxygen species,ROS)含量,PI-Annexin-V法检测细胞凋亡情况;用试剂盒检测细胞中超氧化物岐化酶(superoxide dismutase,SOD)和过氧化氢酶(catalase,CAT)活性以及丙二醛(malondialdehyde,MDA)含量,判断细胞氧化损伤情况。不同浓度Nano-Cd S处理细胞24 h之后,细胞存活率随剂量的增加而下降,浓度为10、20、40和80μg·L~(-1)时,存活率分别为(88.71%±0.80%)、(81.93%±3.06%)、(75.23%±1.13%)和(70.66%±5.63%),且各组间差异均具有统计学意义(P0.05)。以浓度为10和20 mg·L~(-1)的Nano-Cd S染毒24 h后,胞内ROS含量和细胞凋亡率随染毒剂量的增加而增加(P0.05);浓度为10 mg·L~(-1)时,细胞凋亡率为(6.26%±0.44%)。与对照相比,各染毒组SOD和CAT活性和MDA含量升高,20 mg·L~(-1)染毒组SOD和CAT活性和MDA含量高于10 mg·L~(-1)染毒组(P0.05)。研究表明,纳米硫化镉能引起A549细胞的氧化损伤和细胞凋亡,具有明显的细胞毒性。     

新型阻燃剂TCPP对斑马鱼的毒性研究

为了明确新型阻燃剂磷酸三(2-氯丙基)酯(TCPP)的生态风险,本研究采用斑马鱼为模式生物,评价了TCPP对成鱼和胚胎的毒性效应。急性毒性研究结果表明,TCPP对斑马鱼成鱼的96 h致死中浓度(LC50)为47.06 mg·L~(-1),而对胚胎96 h-LC50为26.01 mg·L~(-1),且会影响胚胎的正常发育,导致孵化出的仔鱼产生畸形。成鱼14 d延长毒性试验结果表明,TCPP对斑马鱼成鱼的无可观察效应浓度(NOEC)为1.00 mg·L~(-1),染毒暴露后肝脏和性腺指数随TCPP浓度增加轻微下降,但肝脏中卵黄蛋白原(VTG)的含量和性腺中芳香化酶的活性随TCPP浓度增加普遍升高。此外,TCPP的暴露还会导致斑马鱼脑垂体中合成促性腺激素的相关基因表达量增加。因此,TCPP对斑马鱼成鱼和胚胎的急性毒性均为低毒级,但长期暴露会干扰内分泌系统的调控功能,影响斑马鱼的正常发育。     

佛山市臭氧浓度时间变化特征及主要影响因子

对佛山市2011—2014年O_3监测数据进行分析,结果表明,ρ(O_3)日变化呈现明显的单峰特征,2011—2014年O_3日最大8小时滑动均值(O3-8 h)的年评价值没有出现显著的下降趋势,超标值多出现在8—10月。夏季O3-8 h与日平均气温的相关系数较高,O_3污染多发生在气温30℃,相对湿度为50%~70%的气象条件下。相对湿度60%,气温为20~25℃,也可能出现O3污染。10℃时,不同的温度条件下,O_3与PM_(2.5)存在正相关关系。在不同的季节时段,O_3-8 h基本随着ρ(NO_2)/ρ(NO)增大而增大。