以工业废物制备高效氧化铁系脱硫剂的研究

研究了以硫酸烧渣、转炉赤泥、平炉尘为主要原料制备氧化铁系 (SW型 )脱硫剂的方法及制备工艺。结果表明 :脱硫剂最佳配方为粘结剂 5 %～ 8% ,制孔剂 0 0 8%～ 0 1% ,木屑 8%～ 12 % ,工业废渣 (硫酸烧渣、转炉赤泥、平炉尘等 ) 78%～ 88% ;成型的最佳温度为 15 0℃ ,活化方法应根据主要原料的不同有所差异 ,活化条件以成型活化优于成型前活化     

Optimization of the high-pressure, near-critical liquid-based microsortation of recyclable post-consumer plastics

High-pressure, near-critical liquids were used as float-sink separation media for the microsortation of polyolefin mixtures and PET/PVC mixtures. Near-critical carbon dioxide was used for the refinement of the polyolefins, and sulfur hexafluoride was used to separate post-consumer PVC from PET. Preliminary experiments indicated that there was no overlap in the density ranges of post-consumer HDPE, LDPE and PP containers. There was no overlap in the PET and PVC densities, with the exception of a single PVC packaging material with a density in the PET range. These initial results indicated that a float-sink separation was a viable means of microsortation. Separations of 91% LDPE (1/8′ beads)/9% PP (1/8′ chopped strands) resin mixtures and mixed post-consumer polyolefin flakes were then conducted in a laboratory-scale, 1-I batch apparatus. This apparatus not only permitted the observation of the separation, but also enabled the separated fractions to be removed from the high-pressure environment. The results indicated that LDPE purity of greater than 98.9% was obtained in 3 min or less if (a) the fluid density was 0.018 g/cm³ greater than the PP density and only 0.002 g/cm³ less than the LDPE density, thereby providing the greatest buoyancy force for the removal of the PP, (b) the fluid was recirculated upward through the bed of mixed plastics, facilitating the upward movement of the PP, and (c) the loading was kept at levels below 40% by volume. HDPE purity of 99% was also attained with clean, dry, post-consumer mixed plastic flakes. The loadings for these separations were very low, however, due to the difficulty in agitating the mixed bed of plastics using fluid recirculation. An economic analysis of these microsortation processes indicated that the value of the sorted plastics relative to the mixed feed must increase by approx. $0.08/lb for the CO₂-based separation and approx. $0.27/lb for the SF₆-based separation to justify the implementation of these high-pressure processes.     

双氧水协同生化法处理实际印染废水

研究了双氧水协同水解酸化-接触氧化系统对实际印染废水的处理效果,并与完全生化处理系统进行对比。将100.0 mL经稀释的浓度为3 mL·L-1的双氧水溶液,用蠕动泵以1.67 mL·min-1的速度投加至正常运行的水解酸化体系底部,投加频率1 次·d-1。结果表明,水解酸化体系对COD的去除率为23%~46%,氨氮去除率在-93%~+8.5%之间波动,出水色度为125~150 倍;而接触氧化体系COD去除率提高至39%~59%,氨氮去除率接近100%,出水色度为100~125 倍。采用16S?rDNA?宏基因组高通量测序技术,对比分析了双氧水协同生化处理系统和完全生化处理系统内的微生物菌群结构差异,发现双氧水可洗脱水解酸化污泥中的部分厌氧菌,促进优势菌门Proteobacteria（变形菌）和Bacteroidetes（拟杆菌）的富集,有助于脱色,并有助于洗脱接触氧化体系中的部分非优势菌,刺激Nitrospirae（硝化螺旋菌）的生长,促进脱氮作用。     

ClO2治理医院污水性能参数的研究

研究了ClO2作为消毒剂在去除医院污水中总大肠菌群数(CFU)时的性能参数.实验结果表明,ClO2加入量为5-8 mg/L、温度为20-30℃、接触时间为30-60min、pH为7.8-8.5、填料为组合型,是ClO2去除CFU的最优参数,可使污水中CFU降至500个/L,达到国家一级排放标准(GB8978-1996).同时,分析了各参数对CFU去除率的影响.     

Properties of a Poly(3-hydroxybutyrate) Depolymerase from Penicillium funiculosum

A poly(3-hydroxybutyrate) (PHB) depolymerase was purified from a fungus, Penicillium funiculosum (IFO6345), with phenyl-Toyopearl and its properties were compared with those of other PHB depolymerases. The molecular mass of the purified enzyme was estimated at about 33 kDa by sodium dodecyl sulfate (SDS) polyacrylamide gel electrophoresis. The pH optimum and pI were 6.5 and 6.5, respectively. The purified protein showed affinity to Con A-Sepharose, indicating that it is a glycoprotein. Diisopropylfluorophosphate and dithiothreitol inhibited the depolymerase activity completely. The N-terminal amino acid sequence of the purified enzyme was TALPAFNVNPNSVSVSGLSSGGYMAAQL, which contained a lipase box sequence. This purified enzyme is one of the extracellular PHB depolymerase which belong to serine esterase. The purified enzyme showed relatively strong hydrolytic activity against 3-hydroxybutyrate oligomers compared with its PHB-degrading activity. PHB-binding experiments showed that P. funiculosum depolymerase has the weakest affinity for PHB of all the depolymerases examined.     

纳米Al_2O_3固定化红平红球菌菌球的制备及其对苯酚的降解

以海藻酸铝为主要包埋材料、纳米Al_2O_3为添加剂,包埋固定红平红球菌,制得纳米Al_2O_3固定化红平红球菌菌球,并将其用于苯酚的降解。表征结果显示:菌球内部包含丰富的菌丝体;内部孔径以中孔居多。实验结果表明:菌球的最优制备方案为0.05 g纳米Al_2O_3加入3 m L海藻酸钠溶液中、海藻酸钠质量分数6%、微生物包埋量0.5 m L/m L(以海藻酸钠溶液计)、Al_2(SO_4)_3质量分数3%;在初始苯酚质量浓度为400 mg/L、反应时间为24h、菌球加入量为8 g/L、反应p H为8.0、反应温度为30℃的条件下,菌球首次使用时可使苯酚完全降解,使用5次后的苯酚降解率仍达93%以上,具有良好的循环使用性。     

Heterogeneous oxidation of SO2 by O3-aged black carbon and its dithiothreitol oxidative potential

Ozone (O₃) is an important atmospheric oxidant. Black carbon (BC) particles released into the atmosphere undergo an aging process via O₃ oxidation. O₃-aged BC particles may change their uptake ability toward trace reducing gases such as SO₂ in the atmosphere, leading to different environmental and health effects. In this paper, the heterogeneous reaction process between O₃-aged BC and SO₂ was explored via in-situ diffuse reflectance infrared Fourier transform spectroscopy (DRIFTS). Combined with ion chromatography (IC), DRIFTS was used to qualitatively and quantitatively analyze the sulfate product. The results showed that O₃-aged BC had stronger SO₂ oxidation ability than fresh BC, and the reactive species/sites generated on the surface had an important role in the oxidation of SO₂. Relative humidity or 254 nm UV (ultraviolet) light illumination enhanced the oxidation uptake of SO₂ on O₃-aged BC. The oxidation potentials of the BC particles were detected via dithiothreitol (DTT) assay. The DTT activity over BC was decreased in the process of SO₂ reduction, with the consumption of oxidative active sites.     

贵州省旱田土壤N2O释放及其环境影响因素

以贵州省的玉米－油菜轮作田、大豆－冬小麦轮作和休耕地为研究对象,采用密闭箱－气相色谱法,对整个轮作期的土壤Ｎ₂Ｏ释放进行观测,初步研究我国亚热带旱田的Ｎ₂Ｏ释放特征．实验研究结果表明,３试验田Ｎ₂Ｏ释放通量具有相同的规律性日变化形式,秋收作物达通量极大值的时间比越冬作物滞后２ｈ～３ｈ,气温是控制Ｎ₂Ｏ通量日变化的主要环境因子：３试验田Ｎ₂Ｏ释放通量（以Ｎ₂Ｏ中的Ｎ计）分别在９．８１～４３３．１１,４．００～１８０．４１和９．７４～２８２．００μｇ·ｍ^-2·ｈ^-1,高于我国水田和北方旱田的Ｎ₂Ｏ释放通量;进一步分析表明,３试验田Ｎ₂Ｏ释放通量具有相同的季节变化模式,Ｎ₂Ｏ 释放峰受降雨事件的直接影响,Ｎ₂Ｏ通量与降雨量和土壤湿度间有显著的正相关性,而与温度的关系不明显     

离聚物（MPET）对水中铬离子的吸附性能研究

研究了离聚物（MPET）粉末对Cr^3 的吸附性能，探讨了不同的吸附温度、时间、pH值和不同的初始浓度对吸附性能的影响，实验发现Cr^3 在较低温度下和pH为4时能被MPETO分末很好地吸附，最大饱和吸附量为11.80mg/g，实验表明MPET废纤维很可能发展成为一种经济的吸附重金属离子的材料。     

重庆城区大气颗粒物的元素、离子及物相组成研究

采用X－射线能谱（EDX），傅立叶红外光谱（FT－IR），X－射线衍射（XRI）对重庆市区大气颗粒污染物的元素组成，离子，物相组成进行顾研究，EDX检出了S，Cl,K,Ca,Ti,Cr,Mn,Fe,Cu,Se,Sr,Zr,Rb,Ga,Hg,Zn,Ni元素，FT－IR光谱发现主要存在SO4^2-,NH4^ 和NO3^-,XRD结果表明存在CaSO4.2H2O,α-SiO2,(NH4)2Ca(SO4)2.2H2O,(NH4)2SO4等4个主要物相以及Fe3O4,CaCO3等物相，初步讨论了重庆大气颗粒物的污染来源及其时间，空间分布。