Structure and thermal stability of toxic chromium(VI) species doped onto TiO2 powders through heat treatment

Chromium(VI)-containing sorbents in the form of sludge or solid residue from treatment processes are often landfilled or used as fill materials, therefore the long-term stability of metal binding is important. The reduction of Cr(VI)–Cr(III) through heat treatment may be a useful detoxification method. After heating at 500, 900, 1000, and 1100 °C for 4 h, the transformation of chemical states of chromium on 105 °C-dried, 7.9% Cr(VI)-doped TiO₂ powders was studied on the basis of surface area measurements, scanning electron microscopy (SEM) images, X-ray diffraction (XRD), and extended X-ray absorption fine structure (EXAFS) spectra. It was shown that Cr(VI) was reduced to Cr(III) in the Cr(VI)-doped samples after heating within 500–900 °C. The present results also suggested that the chromium octahedral was bridged to the titanium tetrahedral and was incorporated in TiO₂ minerals formed after 1000 °C treatment.     

Costs and benefits of improving wild salmon passage in a regulated river

This paper presents a cost-benefit analysis (CBA) of a trade-off between salmon and hydropower production in the Ume/Vindel River, northern Sweden. A distinctive element of this analysis is that estimated changes in resource conditions are based on detailed river-specific data. A salmon population model was used to develop the scenario and a novel willingness to pay (WTP) question, which caters for uncertainty in a different manner, provided an interval estimate. Non-use values are the major contributors to the benefit (96–517 millions of Swedish kronor (MSEK)) of increasing the stock of wild salmon. Sensitivity analysis suggests that the opportunity costs in terms of lost electricity are typically higher than the estimated benefits.     

负载型TiO2薄膜光催化剂降解亚甲基蓝

采用溶胶-凝胶法制备了玻璃负载的TiO2薄膜光催化剂,研究了该催化剂对亚甲基蓝溶液的光催化降解,考察了反应时间、水样的初始浓度、溶液的pH等对光催化降解效果的影响。     

固定化真菌漆酶对分散兰-2BLN的脱色和降解

采用改良壳聚糖固定化的真菌漆酶对染料分散兰-2BLN进行脱色和降解条件的研究,探索了固定化漆酶活力、处理时间、染料浓度、温度和pH对其降解效果的影响。结果表明,固定化漆酶脱色降解分散兰-2BLN的适宜条件为：固定化漆酶活力18.2U／mL,染料浓度100mg／L,温度40℃,pH4.6,在上述条件下降解1.5h,分散兰-2BLN脱色率能达到87.68％。重复分批使用固定化漆酶处理2BLN兰,在使用6批次后,脱色率仍能保持在55％以上,其催化效率得到了较大提高。     

HPA／ZnFe2O4-TiO2光催化剂的制备及对马拉硫磷的可见光降解

以纳米TiO2载体,利用浸渍法制备了HPA／ZnFe2O4-TiO2光催化剂。对制备的催化剂进行了XRD、BET、TEM和UV-vis DRS表征。结果表明,催化剂样品均为锐钛矿相且ZnFe2O4很好地分散在载体表面,HPA／ZnFe2O4-TiO2光催化荆的平均粒径为10nm且在380-670nm均有强的光响应;反应最佳的HPA浓度为O.08molfL,最佳的ZnFe2O4负载量为1％。考察了HPA溶液初始浓度、ZnFe2O4负载量、溶液初始pH值、H2O2用量、催化剂用量对催化剂活性的影响。在溶液初始pH=13,H2O2=6mmol／L,催化剂用量为2g/L的最优条件下,光照反应进行100min后,马拉硫磷的降解率可达87％;重复4次后马拉硫磷的降解率仍可以达到67％。     

“5·12”汶川地震灾区典型区域生态环境状况影响评价

“5·12”汶川特大地震发生后。带来的植被破坏、水土流失、次生地质灾害等,给灾区生态环境造成了极大的影响。本文重点以汶川县作为典型区域,运用“3S”技术,通过对汶川县震前、震后的生态环境状况及其变化情况进行定量评价。分析“5·12”大地震对龙门山区生态环境的影响,以期为区域灾后重建提供参考。     

尾气循环技术在国内顺酐装置的应用

顺酐生产过程排放的废气中含有大量未反应原料、副产物CO和挥发性有机物(VOC)等,对其进行处理使之达标排放,回收其中可利用的物质或能量有重要意义。吐哈石化厂顺酐装置采用CONSER公司工艺技术,新增部分尾气回收生产工艺路线,回收40%的尾气中的正丁烷,实现了蒸汽分阶利用,排放的废气中SO2、NOx、颗粒物等达到GB16297-1996《大气污染物综合排放标准》中二级标准。     

臭氧同时脱硫脱硝技术研究进展

对利用臭氧同时脱硫脱硝技术进行了综述,分析了臭氧对NOx的脱除机理。臭氧同时脱硫脱硝技术具有明显的一体化脱除特性,但臭氧的发生费用却制约了它的应用。介绍了目前国外在工程上应用的低温氧化技术（LOTOX）,分析了其脱除效果及优缺点。     

Survivor needs or logistical convenience? Factors shaping decisions to deliver relief to earthquake‐affected communities,Pakistan 2005–06

In Bureaucratizing the Good Samaritan , Waters (2001) argues that bureaucratic rationality distracts humanitarian agencies from the needs of the people they are supposed to assist, in favour of other values that their institutional frameworks dictate. We test his claim by investigating the response to the Pakistan 2005 earthquake. One of us (Dittemore) worked with the United Nations Joint Logistics Centre in the theatre, managing a relief cargo shipment database. The response, known as 'Operation Winter Race', was hampered by extreme logistical challenges, but ultimately succeeded in averting a second disaster resulting from cold and starvation. We use statistical models to probe whether survivor needs significantly guided decisions to deliver relief to affected communities. Needs assessments remained incomplete and incoherent. We measure needs through proxy indicators and integrate them, on a Geographic Information System (GIS) platform, with logistics and relief delivery data. We find that, despite strong logistics effects, needs orientations were significant. However, the strength of decision factors varies between commodity types (food versus clothing and shelter versus reconstruction materials) as well as over the different phases of the response. This study confirms Thomas's observation that logistics databases are rich 'repositories of data that can be analyzed to provide post-event learning' (Thomas, 2003, p. 4). This article is an invitation for others to engage in creative humanitarian data management.     

The 2006 war and its inter-temporal economic impact on agriculture in Lebanon

The July 2006 war waged by Israel on Lebanon caused an estimated USD 1 billion of direct (financial) damage to infrastructure. However, it generated also significant indirect (economic/inter-temporal) costs. One sector that suffered considerably in this respect was agriculture, the main source of income for 30–40 per cent of Lebanese. This paper's main objective is to develop a methodology to estimate the total—direct and indirect—cost of the war to agricultural crop production, using an area of south Lebanon as a focal point. The indirect loss assessment viewed inter-temporal reductions in crop production values as the opportunity cost of not working fields due to the presence of unexploded ordnance (UXO). Various crops were evaluated for two scenarios (50 and 100 per cent damage due to UXO) over UXO-clearance periods of five and 10 years. The results indicate that any damage estimates that include only direct losses will under-estimate total losses by 80 and 87 per cent for the five- and 10-year periods, respectively.