Modification of Ce02-ZrO2 catalyst by potassium for NOx-assisted soot oxidation

Potassium-modified ceria-zirconia catalyst was synthesized by wetness impregnation method. The ageing treatment was performed in static air at 800℃ for 20 hr to evaluate the thermal stability of the catalyst. The catalysts were characterized by X-ray diffraction,BET surface area, oxygen storage capacity, NOx-temperature programmed desorption and soot-temperature programmed oxidation measurements. By introduction of potassium, the maximum soot oxidation rate temperature (Tm) of the ceria-zirconia based catalyst decreased from 525 to 428℃ in the presence of NO under a loose contact mode. The shift of Tm of the K-modified catalyst after ageing is only 15℃. The enhanced activity of the aged catalyst mainly lies in the promotional effect of potassium on the NOx/oxygen storage cacity as well as the soot-catalyst contact.     

Complete catalytic oxidation of o-xylene over Ce02 nanocubes

The activities of CeO2 nanocubes calcined at different temperatures were tested for catalytic oxidation of o-xylene. Using CeO2 nanocubes as catalysts, complete catalytic oxidation of o-xylene was achieved below 210℃. The CeO2 nanomaterials were characterized by means of BET, X-ray diffraction (XRD), transmission electron microscopy (TEM), and high-resolution transmission electron microscopy (HRTEM). From the TEM images, all Ce02 nanocubes displayed cubic morphology irrespective of calcination temperature. The HRTEM images revealed that these nanocubes were enclosed by reactive {001}planes, which may contribute to the intrinsically catalytic property of o-xylene oxidation. The higher activity of Ce02 nanocubes calcined at 550℃ than those calcined at above 550℃ was attributed to their smaller crystallite size and larger surface area. The influences of reaction conditions were also studied, which found that a higher reaction temperature was necessary for complete catalytic oxidation of o-xylene at higher weight hourly space velocity (WHSV) and o-xylene concentration.     

中心组合设计优化S-Cr-TiO2催化剂光降解工艺条件

在确定的温度和光照条件下,采用中心组合设计法研究了固相反应法合成的硫与铬共掺杂二氧化钛(S-Cr-TiO2)光催化剂与水溶苯胺蓝(ANB)可见光降解过程中的三个作用因子:催化剂的浓度、水溶苯胺蓝水溶液的pH值及其初始浓度之间的相互作用关系,得到了影响因子与降解速率之间的回归方程及因素之间相互作用的响应面图.结果表明,S...     

Ti/SnO2-Sb2O5/PbO2阳极电化学氧化降解苯甲酸研究

文章研究了TI/SnO2-Sb2O5/Pbo2在两室电解池中氧化降解苯甲酸的性能,主要考察了电流密度、初始pH值、初始苯甲酸浓度和支持电解质这四个参数对TOC去除效率的影响。实验表明在电流密度为30 mA/cm2,初始苯甲酸浓度为0.5 mmol/L,支持电解质(Na2SO4)为0.1mol/L的条件下,经过6 h反应...     

H2O2胁同三维电极法处理罗丹明B废水的研究

为了了解过氧化氢与三维电极的协同作用,以罗丹明B模拟废水进行了实验研究,探索了填料配比、外加电压、过氧化氢投加量、初始废水pH值、染料初始浓度等单因子对降解罗丹明B的影响,并通过正交试验研究各因素对该法处理罗丹明B模拟废水的效应.结果表明,过氧化氢与三维电极在处理罗丹明B模拟废水时具有明显的协同作用;外加电压=20v,...     

聚丙烯中空纤维膜吸收法烟气脱硫实验研究

采用质量分数为30%的甲基二乙醇胺(MDEA)水溶液为烟气SO2吸收液,聚丙烯(PP)中空纤维微孔膜组件为吸收器,研究吸收液温度、流量变化,气体停留时间,以及气液两相流程等操作条件对聚丙烯(PP)中宅纤维膜脱硫率的影响,研究表明30%MDEA水溶液在温度35℃,流量100mL/min的最佳试验条件下,经过一个膜吸收过程...     

提高煤层气采收率的CO2埋存技术

作为常规油气重要接替补充的非常规天然气,煤层气越来越受到世人的关注.如何提高煤层气采收率是摆在煤层气开发工程师面前迫切需要解决的技术难题.通过向煤层中注入CO2,既可以提高煤层气采收率又能间接地实现CO2减排,即提高煤层气采收率的CO2埋存技术(CO2-ECBM).该项技术已在世界各地迅速发展,并取得一些实质性进展.文...     

电镀行业清洁生产指标体系的修正

文章旨在通过剖析清洁生产指标体系建立的全过程,发现《电镀行业清洁生产指标体系(试行)》存在的缺陷与不足,并进行修正,采用层次分析法对修正后的定量指标体系赋权.最后选用三家电镀企业,对修正前后的指标体系进行评价与对比,并据此证明:修正后的指标体系更能客观评价企业真实的清洁生产水平.     

大型炼化一体化项目清洁生产评价实例研究

炼化一体化、装置大型化为炼油项目的发展趋势,符合清洁生产、循环经济原则。目前炼化一体化项目尚无相应的清洁生产标准。综合指标评价法将定性指标量化与定量指标统一起来,从而能从整体上做出一个明确的判断结果。以国内同行业先进企业各项指标为基准值,对某1000万t/a炼油、100万t/a乙烯一体化项目实例研究表明,采用综合指标评价法进行清洁生产评价,使得定性分析和定量评价结果得到了较好的吻合,评价结果更具科学性与实用性。综合指标评价法不仅可以用于大型炼化一体化项目环境影响评价时的清洁生产评价,也可用于现有工程的清洁生产审核以及企业实施清洁生产绩效评价。     

供水管网水质评价方法的探讨及其应用

利用了模糊数学评价模型和综合指数评价模型分别对南方某市部分给水管网水质进行评价。评价结果分析表明,模糊数学评价法具有评价准确性好、操作简单的特点;综合指数法具有评价结果直观、精确度较高的优点。从评价结果上看,综合指数法较模糊数学评价法更为合理。