三维叠前时间偏移技术在江苏WZD地区的应用

当地下地质构造复杂、断裂发育,横向速度变化不是太剧烈的情况下,提高偏移成像精度,三维叠前时间偏移是一种行之有效的方法。三维叠前时间偏移取得成功的关键:一是高保真、高信噪比的叠前数据;二是建立一个合理的三维偏移速度场。随着计算机性能的不断提高,三维叠前时间偏移逐渐成为常规处理技术,该技术在江苏油田WZD地区得到了广泛的应用,实际资料处理结果及钻探效果证实了三维叠前时间偏移技术是解决WZD地区复杂构造成像精度的一种好方法。     

Adsorption performance of CMK-3 and C-FDU-15 in NO removal at low temperature

CMK-3 and C-FDU-15 samples were synthesized using hard-templating and evaporationinduced self-assembly(EISA) methods,respectively.The pore structures of CMK-3 and CFDU-15 as well as commercial activated carbon were characterized by means of X-ray diffraction,field emission scanning electron microscopy,transmission electron microscopy,and N_2 adsorption–desorption.Adsorption of NO was investigated by means of thermogravimetric analysis,temperature-programmed desorption of NO + O_2,and in situ diffuse reflectance Fourier transform infrared spectroscopy.The results show that the CMK-3 and C-FDU-15 materials possessed ordered and uniform structures.The coadsorption capacity of NO and O_2 decreased in the sequence CMK-3(88.6 mg/g) C-FDU-15(71.7 mg/g) AC(25.3 mg/g).There were two main adsorption species on CMK-3 and CFDU-15:nitrite and nitrate.Nitrite is converted to nitrate easily.However,the adsorption species were more complex on AC,with nitrite being the main species.Moreover,CMK-3 and C-FDU-15 exhibit excellent regeneration efficiency compared with AC.The excellent NO adsorption performance of CMK-3 and C-FDU-15 was associated with their ordered mesoporous structures and high surface areas.The research provides more options for NO adsorption in the future.     

Component regulation in novel La-Co-O-C composite catalyst for boosted redox reactions and enhanced thermal stability in methane combustion

A novel La-Co-O-C (LC-C) composites were prepared via a facile co-hydrothermal route with oxides and glycerol and further optimized for methane catalytic activity and thermal stability via component regulation. It was demonstrated that Co₃O₄ phase was the main component in regulation. The combined results of X-ray photoelectron spectroscopy (XPS), temperature-programmed desorption of oxygen (O₂-TPD), temperature-programmed reduction of hydrogen (H₂-TPR), temperature-programmed desorption of ammonia/carbon dioxide (NH₃/CO₂-TPD) revealed that component regulation led to more oxygen vacancies and exposure of surface Co²⁺, lower surface basicity and optimized acidity, which were beneficial for adsorption of active oxygen species and activation of methane molecules, resulting in the excellent catalytic oxidation performance. Especially, the (3.5)LC-C (3.5 is Co-to-La molar ratio) showed the optimum activity and the T₅₀ and T₉₀ (the temperature at which the CH₄ conversion rate was 50% and 90%, respectively) were 318 and 367°C, respectively. Using theoretical calculations and in situ diffuse reflection infrared Fourier transform spectroscopy characterization, it was also found that the catalytic mechanism changes from the “Rideal-Eley” mechanism to the “Two-term” mechanism depending on the temperature windows in which the reaction takes place. Besides, the use of the “Flynn-Wall-Ozawa” model in thermoanalytical kinetics revealed that component regulation simultaneously optimized the decomposition activation energy, further expanding the application scope of carbon-containing composites.     

高浓度Cl-水样CODcr的测定

阐述了高浓度Cl-水样,以铬酸钾做指示剂,加入适量的硝酸银,形成AgCl沉淀,消除了Cl-的干扰,再用离心沉淀机充分沉淀,取上清液,用COD快速测定仪测定CODcr,有很高的准确度,符合测定要求.     

Ag/Al2O3催化剂用于碳氢化合物选择性还原NO

比较了富氧条件下CH4、C3H8、C3H6和C2H5OH分别用作还原剂时,NO在Ag/Al2O3催化剂上的还原活性.结果表明, CH4和C3H8还原NO的活性很低,而C3H6和C2H5OH能有效地还原NO.在此基础上,研究了H2O和SO2对C3H6和C2H5OH在Ag/Al2O3催化剂上还原NO活性的影响.结果表明,H2O的存在会降低低温区的NO还原活性,而且这种影响是可逆的.将H2O 和SO2同时加入反应混合气,引起NO还原活性较大幅度降低,结合程序升温脱附实验结果,认为可能是由于存在SO2时,Ag/Al2O3催化剂吸附NO的能力降低.     

锂离子电池正极材料的回收及再制备

通过湿化学法从废旧锂离子电池中回收得到Li+、Co2+的硝酸溶液,以此为钴源,与Ni(NO3)2.6H2O、Mn(NO3)2按化学计量比混合,用草酸盐共沉淀法制备草酸盐前驱体,然后按Li过量5%加入Li2CO3混合,在空气中于800～950°C煅烧15 h得LiCo1/3Mn1/3Ni1/3O2,研究了煅烧温度对材料结构、形貌以及电化学性能的影响。结果表明,900℃保温15 h制备的LiCo1/3Mn1/3Ni1/3O2正极材料,为理想的(α-NaFeO2层状结构,颗粒为大小均匀的球形,在2.5～4.3 V的电压范围内,以0.1 C的恒定电流进行充放电,其首次充放电比容量分别为194.3和150.9 mAh/g,10次循环之后的容量保持率为89.9%,放电比容量为135.0 mAh/g。     

Fetal urinary insulin-like growth factor I and binding protein 3 in bilateral obstructive uropathies

Fetal urinary concentrations of insulin-like growth factor I (UIGF-I) and binding protein 3 (UIGFBP-3) were determined in patients with prenatal diagnosis of bilateral obstructive uropathy. Patients were retrospectively assigned to three groups, on the basis of outcome: group 1, termination of pregnancies (n = 11) with sonographic evidence of severe oligohydramnios or renal dysplasia, confirmed at histological examination; group 2, patients (n = 10) with postnatal plasma creatinine > 50 μmol/1 at the age of 1 year (1 yr-pCreat); and group 3, patients (n = 16) with 1 yr-pCreat ≤ μmol/1. The results show a significant increase in UIGF-I and UIGFBP-3 in groups 1 (18 159 ± 9083 pg/ml; 2657 ± 669 ng/ml) and 2 (1574 ± 847 pg/ml; 176 ± 50 ng/ml) in comparison with group 3 (35 ± 6 pg/ml; 21 ± 2 ng/ml). UIGF-I and UIGFBP-3 were significantly correlated with postnatal plasma creatinine, and were both sensitive (90 per cent; 80 per cent) and specific (88 per cent; 88 per cent) for prediction of elevated 1 yr-pCreat (>50 μmol/1). Fetal urinary IGF-I and IGFBP-3 are increased in severe fetal bilateral obstructive uropathy, possibly reflecting tubular dysfunction or/and increased synthesis consequent upon fetal kidney injury. Their predictive value for postnatal renal function needs further assessment.     

主次波长新分光光度法测定天然水硝酸盐

在硫酸介质中,邻苯氨基苯甲酸与硝酸盐(NO_3~-)生成紫红色络合物.本文依据悬浮颗粒对光的吸收性质研究利用该灵敏反应测定 NO_3~—N 新光度法——(?)次双波长法,通过对样品分析,可提高分析灵敏度和精密度,回收良好,且操作简单快速,计算曲线稳定,适合于测定地下水,湖水等天然水体 NO_3~-—N.     

GdFeO3上CO氧化的Redox机理动力学

ＧｄＦｅＯ３用柠檬酸络合制备。用ＸＲＤ测定ＧｄＦｅＯ３为钙钛矿结构。用ＣＯ还原脉冲及用Ｏ２再氧化脉冲证实在ＧｄＦｅＯ３上ＣＯ氧化为Ｒｅｄｏｘ机理。用外循环流动无梯度反应顺研究了ＣＯ氧化稳态动力学。用正交设计法估计动力学方程中的参数。还原催化剂再氧化为控制步骤。     

X70钢在碳酸氢钠溶液中的腐蚀行为研究

通过电化学试验方法对X70钢在NaHCO3溶液中的腐蚀行为进行了研究.实验结果表明,当NaHCO3质量分数低于0.10%时,极化曲线呈现阳极活化溶解过程,高于0.10%时阳极极化出现钝化过程,并且在-0.6 V(vs.SCE)左右出现了一个新的小电流峰.通过对交流阻抗谱分析发现,高频区均是由略偏离半圆的容抗弧组成,并且实部有所收缩.HCO3-的还原反应在阴极过程中起主要作用,整个过程受极化控制.X70钢在NaHCO3溶液中的腐蚀速度随着NaHCO3质量分数的增大而增大,在试验结束后,对试样表面的腐蚀形貌进行了观察,并利用XRD分析出腐蚀产物主要为FeO(OH)和Fe3O4.