Reaction pathways of dimethyl phthalate degradation in TiO2-UV-O2 and TiO2-UV-Fe(VI) systems

The photocatalytic degradation of dimethyl phthalate (DMP) in aqueous TiO₂ suspension under UV illumination has been investigated using oxygen (O₂) and ferrate (Fe(VI)) as electron acceptors. The experiments demonstrated that Fe(VI) was a more effective electron acceptor than O₂ for scavenging the conduction band electrons from the surface of the catalyst. Some major intermediate products from DMP degradation were identified by HPLC and GC/MS analyses. The analytical results identified dimethyl 3-hydroxyphthalate and dimethyl 2-hydroxyphthalate as the two main intermediate products from the DMP degradation in the TiO₂–UV–O₂ system, while in contrast phthalic acid was found to be the main intermediate product in the TiO₂–UV–Fe(VI) system. These findings indicate that DMP degradation in the TiO₂–UV–O₂ and TiO₂–UV–Fe(VI) systems followed different reaction pathways. An electron spin resonance analysis confirmed that hydroxyl radicals existed in the TiO₂–UV–O₂ reaction system and an unknown radical species (most likely an iron–oxo species) is suspected to exist in the TiO₂–UV–Fe(VI) reaction system. Two pathway schemes of DMP degradation in the TiO₂–UV–O₂ and TiO₂–UV–Fe(VI) reaction systems are proposed. It is believed that the radicals formed in the TiO₂–UV–O₂ reaction system preferably attack the aromatic ring of the DMP, while in contrast the radicals formed in the TiO₂–UV–Fe(VI) reaction systems attack the alkyl chain of DMP.     

Influence of Na2S on the degradation kinetics of CCl4 in the presence of very pure iron

This paper presents the results of kinetic studies to investigate the effect of FeS film formation on the degradation rate of CCl(4) by 99.99% pure metallic iron. The film was formed by submersing metallic iron grains in an oxygen free HCO(3)(-)/CO(3)(2-) electrolyte solution. When the grains had reached a quasi steady-state value of the corrosion potential, Na(2)S((aq)) was injected. Upon injection, a microm thick poorly crystalline FeS film formed immediately on the iron surface. Over time, the iron became strongly corroded and both the FeS film and the metallic iron grains began to crack leading to exposure of bare metallic iron to the solution. The effect of the surface film on the degradation rate of CCl(4) was investigated following four periods of aging, 1, 10, 30, and 60 days. Relative to the controls, the 1-day sulfide-aged iron showed a substantial decrease in rate of degradation of CCl(4.) However, over time, the rate of degradation increased and surpassed the degradation rate obtained in the controls. It has been proposed that CCl(4) is reduced to HCCl(3) by metallic iron by electron transfer. The FeS film is substantially less conducting than the bulk iron metal or non-stoichiometric magnetite and from the results of this study, greatly decreases the rate of CCl(4) degradation relative to iron that has not been exposed to Na(2)S. However, continued aging of the FeS film results in breakdown and stress-induced cracking of the film, followed by dissolution and cracking of the iron itself. The cracking of the bulk iron is believed to be a consequence of hydrogen embrittlement, which is promoted by sulfide. The increase in CCl(4) degradation rate, as the FeS films age, suggests that the process of hydrogen cracking increases the surface area available for charge transfer.     

“四沿”化工企业污水处理系统安全事故状态下负荷缓冲及安全环境(SE)联锁探讨

在对"四沿"(沿江、沿河、沿湖、沿海)化工行业污水处理方法及流程特点总结的基础上,归纳出应对水力和污染物冲击负荷的缓冲方法。为克服缓冲控制能力有限的缺点,提出一种新方法——SE(安全和环境)联锁,以期达到完善管理、提高控制效果的目的,并详细阐述了该方法在管理及技术层面的实施途径。     

建筑火灾烟气中CO迁移规律的FDS模拟

以T型"侧间-走廊"典型建筑火灾为模拟对象,分析烟气在走廊中的水平和垂直流动特征,并对火源房门高低、走廊端头启闭和多房门启闭等场景使用火灾模拟软件(FDS)进行了模拟和远距离房间CO浓度的迁移规律的分析。结果表明:烟气从火源房间经拱腹溢出在走廊中形成受限空间的顶棚射流;门檐高度决定了CO能够在走廊中的迁移量;烟气在走廊远距离封闭端头形成上部的热烟气层,中部回流层和下层的补气层;其中中部烟气回流层的高低、流速和CO浓度是影响临近非火源房间CO浓度的重要因素。走廊启闭和多房门火灾场景的模拟结果也进一步证明了CO的迁移规律。     

基于模糊层次综合法的炼铁厂评价模型及应用研究

运用模糊层次综合评价法建立炼铁厂安全评价的模型,该模型能有机地将炼铁厂的安全管理、设备设施、人员和环境等因素结合起来,依据各因素对系统安全影响的大小,决策者可对其采取相应的改进措施以有效地控制事故的发生。通过对炼铁厂安全性的分析,其评价结果和现实情况基本相符,能较为全面反映整个系统的安全性和各因素对系统安全性的影响大小,为炼铁厂的安全评价提供了一种有效的综合评价方法。     

基于混沌、灰色理论模型,预测煤矿生产中安全状况的对比分析

建立煤矿安全生产状况预测的非线性回归模型、混沌动力学模型、灰色模型和灰色残差模型,用4种模型对我国百万吨煤矿死亡率进行预测分析,其结果表明:混沌动力学预测模型和非线性回归模型使用参数较少、计算简单,易于推广,但预测精度尚不高,误差较大;使用灰色残差模型进行预测,虽然计算复杂,但预测精度较高,验证2007年度百万吨死亡率相对误差仅为0.96%,煤炭生产的安全性指标百万吨死亡率宜采用残差模型进行预测。笔者认为,灰色残差模型在对煤矿安全生产的宏观管理领域有广泛的应用前景。     

企业安全管理体系标准模式的比较研究

采用对比分析法和实证分析法,对当前国内外流行的企业安全管理体系标准模式及其评价方法进行比较研究,旨在把握诸多标准模式的原则、路径、结构、方法和共性特征及其可以发挥的具体优点,将研究的标准模式的评价方法归纳为两大类即体系认证审核法和综合考评打分法,并对两类评价方法的优缺点进行剖析。体系认证审核法的优点是过程方法、符合性及抽样,考评打分法则提供了安全绩效准则。对吸收融合两类评价方法的优点形成综合性评价方法的途径和方式进行了探讨,为企业建立有效、适用的安全管理体系提供了依据。     

基于OSHMS的煤矿模糊综合安全评价管理模型的建立

针对目前我国煤矿企业安全管理现状,以一种全新的思路结合职业安全健康管理体系(OSHMS)的系统化体系结构及其先进之处,以预防为主,持续改进为动力,建立了基于生产过程的绩效测量、人员职责分配、运行控制和风险管理为核心的4个主要因素的安全评价管理模型;并以此为指导建立安全评价指标体系框架,运用模糊综合安全评价的方法对指标体系进行合成;最后,结合矿井生产过程中的供电系统,对淮南潘三矿现场进行实例应用,证明其可行性。该管理模型对煤矿企业安全管理有推广和借鉴意义,可望为煤矿企业通过安全管理实现科技兴安提供一种更可靠,更有效的安全管理方法。     

基于社会科学统计程序(SPSS)回归性分析的尾矿库事故预测模型

基于社会科学统计程序(SPSS)软件的分析功能,对调查研究中获取的尾矿库案例进行数据提炼和分类编码,找出相关因子并进行回归性分析。最终目的是找出尾矿库各个因素的内在联系,建立简单的尾矿库事故模型,从而可以初步预测尾矿库事故发生的可能性。该预测模型为尾矿库事故的研究提出了新方法,对于防灾减灾以及保护人民生命财产安全起到了积极作用。     

基于层次分析法的Pedersen人因失误模型研究

科技的发展,使机器设备可靠性有了显著提高,工作环境也得到了改善,但由于人的复杂性,人因失误成为主要的致因因素,如何预防和控制人的失误就成为一个非常重要的课题.运用层次分析法的基本原理,结合Pedersen人因失误模型,构建了导致人因失误的层次分析模型,计算结果显示,人在某种状态下承受负荷的能力大小是影响其失误的主要原因.通过实例,证明了计算结果的可靠性,并提出了减少人因失误的建议.