山梨酸废水在ABR中的基质降解行为

稳态条件下,采用厌氧折流板反应器(anaerobic baffled reactor,ABR)处理山梨酸废水并进行基质降解动力学研究.实验表明,在污泥负荷为0.54～1.63 kg COD/(kg VSS·d)的范围内,COD去除率随着负荷的增加从85%降到55%.各隔室出水COD沿程递减,前3个隔室承担了去除COD的重要作用,但随着污泥负荷的增加,后部承担的COD去除率比例增大.基于各串联隔室完全混合的假定,推导ABR中山梨酸废水的基质降解动力学方程,并通过实验确定相关动力学参数及相应的动力学方程.实测值与预测值基本吻合.     

改性粉煤灰在酸雾治理方面的研究

为去除化工生产等过程中产生的酸雾废气,首先用水作用法、微波法和传统湿法对粉煤灰进行改性试验,结果显示:传统湿法中的碱法效果最佳,改性后粉煤灰的BET比表面积是改性前的8.23倍.再用改性后的粉煤灰与廉价易得的天然矿物沸石和熟石灰作为活性组分,制得一种新型的复合吸附剂.常温常压下,动态吸附盐酸雾,实验结果表明:由改性粉煤灰制作的吸附剂G对盐酸雾的吸附性能比未经改性的吸附剂W有所提高,在文中所述条件下,饱和吸附量由改性前的331.4 mg/g提高到改性后的445.2 mg/g.     

Influence of Na2S on the degradation kinetics of CCl4 in the presence of very pure iron

This paper presents the results of kinetic studies to investigate the effect of FeS film formation on the degradation rate of CCl(4) by 99.99% pure metallic iron. The film was formed by submersing metallic iron grains in an oxygen free HCO(3)(-)/CO(3)(2-) electrolyte solution. When the grains had reached a quasi steady-state value of the corrosion potential, Na(2)S((aq)) was injected. Upon injection, a microm thick poorly crystalline FeS film formed immediately on the iron surface. Over time, the iron became strongly corroded and both the FeS film and the metallic iron grains began to crack leading to exposure of bare metallic iron to the solution. The effect of the surface film on the degradation rate of CCl(4) was investigated following four periods of aging, 1, 10, 30, and 60 days. Relative to the controls, the 1-day sulfide-aged iron showed a substantial decrease in rate of degradation of CCl(4.) However, over time, the rate of degradation increased and surpassed the degradation rate obtained in the controls. It has been proposed that CCl(4) is reduced to HCCl(3) by metallic iron by electron transfer. The FeS film is substantially less conducting than the bulk iron metal or non-stoichiometric magnetite and from the results of this study, greatly decreases the rate of CCl(4) degradation relative to iron that has not been exposed to Na(2)S. However, continued aging of the FeS film results in breakdown and stress-induced cracking of the film, followed by dissolution and cracking of the iron itself. The cracking of the bulk iron is believed to be a consequence of hydrogen embrittlement, which is promoted by sulfide. The increase in CCl(4) degradation rate, as the FeS films age, suggests that the process of hydrogen cracking increases the surface area available for charge transfer.     

溶胶凝胶法制备磷钨酸掺杂TiO2薄膜及其光催化性能

以钛酸四丁酯为前驱物,采用溶胶凝胶法制备了磷钨酸掺杂的二氧化钛薄膜。通过XRD、FT-TR对该薄膜进行了表征,研究了薄膜在对氯苯酚光降解中的催化活性。结果表明,当磷钨酸与二氧化钛摩尔比为0.01∶1、薄膜烧结温度600℃、对氯苯酚溶液浓度30 mg/L（pH＝5）、光催化8 h的条件下,对氯苯酚的降解率超过90%,且薄膜可以重复使用。磷钨酸对二氧化钛的光催化活性具有明显的促进作用。     

Co3O4/介孔分子筛催化剂对苯催化完全氧化的研究

分别以介孔分子筛MCM-41、MCM-48、SBA-15为载体,采用等体积浸渍法制备了氧化钴/介孔分子筛催化剂,利用N₂吸附、X射线衍射、程序升温还原等技术对催化剂进行了表征,考察了Co₃O₄的负载量及载体的孔结构对催化剂完全催化氧化苯的性能的影响。结果表明,Co₃O₄的负载量为20%时,催化剂的催化活性最好;载体的孔径和催化剂的可还原性能是影响催化活性的主要因素,催化剂活性顺序为Co₃O₄ /SBA-15> Co₃O₄ /MCM41> Co₃O₄ /MCM-48。     

耐热乳杆菌的分离及在食物垃圾乳酸发酵中的应用

食物垃圾在我国城市生活垃圾中占有较大比重.发酵食物垃圾生产乳酸是实现其资源化的有效方法.从厌氧发酵的食物垃圾中分离到一株耐热乳酸菌TY50,根据形态、生理生化特征和16S rDNA序列,确定该菌株属于乳杆菌属的干酪乳杆菌组群(Lactobacillus casei group),其最高生长温度为52℃.TY50发酵食物垃圾生产乳酸的最佳同液比为1:12,最适温度为45 ℃.在pH 5.5～6.0条件下,发酵食物垃圾产生36.29 g/L的乳酸,乳酸体积产牢和转化率(乳峻/垃圾干重)分别达到1.01 g/(L·h)和0.44.     

Heavy metals' content of automotive shredder residues (ASR): evaluation of environmental risk

Every year between 8 and 9 millions of vehicles in the European Union arrive to their end of life. Car wastes can have a very high metal content, falling into hazardous waste class. A preliminary evaluation of these wastes could be made by metals' leaching test runs which is the main objective of the present study. Evaluation of the total metal content was carried out by X-ray fluorescence and the mobility of these metals using two simple standardized extractions such as the TCLP (Toxicity Characterisation Leaching Procedure) of the US EPA and the German leaching test DIN 38414-S4. Additionally, an extraction test with acetone was performed in order to recognise metals bounded to organic matter. The results show that the total metal content of the ASR can overpass the established values for inert residues. Lead and zinc contents are fairly well correlated with grain-size, whilst other metals' contents do not exhibit clear grain-size dependence.     

Changes of organic acid exudation and rhizosphere pH in rice plants under chromium stress.

The effect of chromium (Cr) stress on the changes of rhizosphere pH, organic acid exudation, and Cr accumulation in plants was studied using two rice genotypes differing in grain Cr accumulation. The results showed that rhizosphere pH increased with increasing level of Cr in the culture solution and with an extended time of Cr exposure. Among the six organic acids examined in this experiment, oxalic and malic acid contents were relatively higher, and had a significant positive correlation with the rhizosphere pH, indicating that they play an important role in changing rhizosphere pH. The Cr content in roots was significantly higher than that in stems and leaves. Cr accumulation in plants was significantly and positively correlated with rhizosphere pH, and the exudation of oxalic, malic and citric acids, suggesting that an increase in rhizosphere pH, and exudation of oxalic, malic and citric acid enhances Cr accumulation in rice plants.     

乳酸和复合脂肪酸抑制奶牛对环境污染的效果分析

将20头荷斯坦产奶奶牛随机分为对照组和试验Ⅰ～Ⅲ组,对照组饲喂全混日粮(TMR),试验Ⅰ组每头奶牛每天饲喂TMR加150.0 g复合脂肪酸,试验Ⅱ组每头奶牛每天饲喂TMR加150.0 g乳酸,试验Ⅲ组每头奶牛每天饲喂TMR加150.0 g复合脂肪酸/乳酸(质量比为1∶1),分析探讨了复合脂肪酸和乳酸对奶牛粪尿、氮、总磷排泄量和CH4释放量的影响.结果表明,相比对照组,试验Ⅲ组1头奶牛1年CH4释放量减少30.64 kg,粪尿、氮、总磷排泄量分别减少1.43 t、28.32 kg和2.36 kg,标准乳(FCM)提高3.28%.在奶牛饲料中添加乳酸和复合脂肪酸的混合酸,能有效抑制奶牛对土壤、水体及空气的污染,显著提高奶牛的生态效益和经济效益.     

Wastewater-nitrogen removal using polylactic acid/starch as carbon source: Optimization of operating parameters using response surface methodology

The use of PLA/starch blends for nitrogen removal was achieved. The influence of different operating parameters on responses was verified using RSM. The conditions for desired responses were successfully optimized simultaneously. Blends material may have a promising application prospect in the future. Nitrogen removal from ammonium-containing wastewater was conducted using polylactic acid (PLA)/starch blends as carbon source and carrier for functional bacteria. The exclusive and interactive influences of operating parameters (i.e., temperature, pH, stirring rate, and PLA-to-starch ratio (PLA proportion)) on nitrification (Y₁), denitrification (Y₂), and COD release rates (Y₃) were investigated through response surface methodology. Experimental results indicated that nitrogen removal could be successfully achieved in the PLA/starch blends through simultaneous nitrification and denitrification. The carbon release rate of the blends was controllable. The sensitivity of Y₁, Y₂, and Y₃ to different operating parameters also differed. The sequence for each response was as follows: for Y₁, pH>stirring rate>PLA proportion>temperature; for Y₂, pH>PLA proportion>temperature>stirring rate; and for Y₃, stirring rate>pH>PLA proportion>temperature. In this study, the following optimum conditions were observed: temperature, 32.0°C; pH 7.7; stirring rate, 200.0 r·min^-1; and PLA proportion, 0.4. Under these conditions, Y₁, Y₂, and Y₃ were 134.0 μg-N·g-blend^-1·h^-1, 160.9 μg-N·g-blend^-1·h^-1, and 7.6 × 10³ μg-O·g-blend^-1·h^-1, respectively. These results suggested that the PLA/starch blends may be an ideal packing material for nitrogen removal.