软骨藻酸胶体金免疫层析检测试纸条的研制

制备软骨藻酸（DA）胶体金免疫层析快速检测试纸条,建立一种快速检测贝类食品中软骨藻酸含量的检测方法.采用柠檬酸三钠还原氯金酸法制备颗粒直径20 nm的胶体金;电镜鉴定后,确定胶体金标记软骨藻酸单克隆抗体的最佳条件并制备金标抗体;金标抗体喷涂在玻璃纤维垫上制成胶体金结合垫;软骨藻酸与牛血清蛋白（BSA）的偶联物构成的包被...     

A comparison of pretreatments on release of sugars from sweet sorghum bagasse for bioethanol production

Dilute acid pretreatment and steam pretreatment were evaluated for maximum sugars release and ethanol production from sweet sorghum bagasse (SSB). The fermentation potential of the condensate and hydrolysate obtained from steam pretreatment (10 kg/cm², 10 minutes) and dilute acid hydrolysis (1% (w/w) sulphuric acid, 25% substrate loading) respectively, was checked with Pichia stipitis NCIM 3497 and Debaryomyces hansenii sp. Ethanol production and yield using acid hydrolysate was higher with Debaryomyces hansenii sp. (28.4 g/L and 0.37 g/g respectively) as compared with Pichia stipitis NCIM 3497 (21.9 g/L and 0.29 g/g respectively).     

Molecular docking analysis on antifungal properties of acid condensate produced from palm kernel shell

The rise in the number of fungi that resisted antifungal action is of serious concern nowadays. In this study, the potential of acid condensate (AC) produced from microwave-assisted pyrolysis of palm kernel shell (PKS) was investigated for its antifungal properties through molecular docking evaluation. The phenolic-rich AC was determined for its chemical compositions using the GC–MS analysis where compounds with the highest phenolics content were further evaluated (using the Autodock Tools 1.5.7) for its potential enzymes/protein binding properties. From the GC–MS analysis, catechol, guaiacol and syringol were present at highest percentages. This directly correlates with results obtained from the molecular docking works where all these ligands managed to bind (indicated by H-bond, π-stacking, hydrophobic interaction) with some of the amino acid at the active sites which indicate its potential to inhibit substrate binding of this enzyme. As a conclusion, this study demonstrated the potential use of AC from agricultural biomass such as PKS as a natural-based antifungal agent that can reduce environmental and health impacts.     

稀酸预处理铜藻制备生物乙醇工艺

选取暖温带海洋生态环境生物修复的首选物种——铜藻(Sargassum horneri)为原料进行生物乙醇的制备,以稀硫酸水解后的还原糖收率为响应值,考察水解温度、液固比、水解时间和w(H₂SO₄)等参数对水解效率的影响. 为优化稀酸水解铜藻预处理的工艺条件,在单因素试验的基础上,利用Box-Benhnken中心组合设计法和响应面分析法,建立稀酸预处理工艺参数的回归模型,并与酶水解及发酵相结合验证了铜藻稀酸预处理效果. 结果表明:①稀酸水解铜藻的最优工艺参数. 水解温度为120 ℃,液固比为20∶1,水解时间为2.00 h,w(H₂SO₄)为4.50%. ②稀酸水解铜藻过程中各影响因素之间存在交互作用,水解时间和w(H₂SO₄)的非线性作用显著. ③对经最佳稀酸预处理工艺处理后的铜藻粉进行酶水解,其还原糖收率为44.05%,是未预处理下的8.14倍,并且后续进行发酵后,乙醇产率达7.80%,是未预处理下的2.00倍. 表明铜藻是一种潜在的生物乙醇原料,稀酸预处理方法对铜藻生物乙醇的制备行之有效.      

Preliminary studies on potential remediation of acid mine drainage‐impacted soils by amendment with drinking‐water treatment residuals

Mining operations result in a wide range of environmental impacts: acid mine drainage (AMD) and acid sulfate soils being among the most common. Due to their acidic pH and high soluble metal concentrations, both AMD and acid sulfate soils can severely damage the local ecosystems. Proper post‐mining management practices are necessary to control AMD‐related environmental issues. Current AMD‐impacted soil treatment technologies are rather expensive and typically not environmentally sustainable. We conducted a 60‐day bench‐scale study to evaluate the potential of a cost‐effective and environment‐friendly technology in treating AMD‐impacted soils. The metal binding and acid‐neutralizing capacity of an industrial by‐product, drinking water treatment residuals (WTRs) were used for AMD remediation. Two types of locally generated WTRs, an aluminum‐based WTR (Al‐WTR) and a lime‐based WTR (Ca‐WTR) were used. Highly acidic AMD‐impacted soil containing very high concentrations of metals and metalloids, such as iron, nickel, and arsenic, was collected from the Tab‐Simco coal mine in Carbondale, Illinois. Soil amendment using a 1:1 Al‐ and Ca‐WTR mix, applied at 5 and 10 percent rates significantly lowered the soluble and exchangeable fractions of metals in the AMD‐impacted soil, thus lowering potential metal toxicity. Soil pH increased from an extremely acidic 2.69 to a near‐neutral 6.86 standard units over the 60‐day study period. Results from this preliminary study suggest the possibility of a successful scale‐up of this innovative, cost‐effective, and environmentally sustainable technology for remediating AMD‐impacted acid sulfate soils.     

有机磷阻燃剂生产废水预处理工艺研究

采用液膜萃取—酸析沉降—络合萃取组合工艺对有机磷阻燃剂生产废水进行预处理.最佳工艺条件为:液膜萃取时,液膜油相(表面活性剂与煤油的混合液)与内水相(H2SO4溶液)的体积比2∶1、乳化液膜与废水的体积比1∶8、废水pH 13.0,硫酸体积分数10％、煤油中表面活性剂质量浓度30 g/L、液膜萃取时间 15 min;酸析沉降时,废水pH l.0,酸析沉降时间30 min;络合萃取时,络合萃取剂(烷基叔胺N235与煤油的混合液)中烷基叔胺N235体积分数30％,络合萃取剂与废水的体积比1∶4,废水pH l.0,络合萃取时间30 min.在此最佳处理条件下,废水COD总去除率可达93％,吡啶去除率达99.9％以上,总磷去除率可达97％,BOD5/COD提高至0.32,有利于后续生化处理.     

WEP的安全技术分析及对策

在对无线局域网WLAN标准IEEE80 2 .11的WEP描述的基础上 ,笔者深入研究了WEP协议的设计上和实际应用中存在的密钥序列重复使用、消息认证和完整性等严重安全漏洞 ;详细分析了标准无线局域网中WEP协议解决方案 ;提出了WEP的改进算法WEP2 ,WEP2将IV大小增加到 12 8bit,以增强抗攻击能力 ;分析了AES解决方案的可行性 ;在密钥再生与分配方面 ,提出在MAC层实现经认证的密钥交换 ,用来改善WEP的安全脆弱性等解决措施。最后 ,还对今后的研究方向作出进一步的展望     

玉米芯为碳源实现酸性矿山废水生物处理

引入了一种新的碳源——玉米芯，对SRB法处理酸性矿山废水进行了更加深入的探索，分析了各种参数条件对s暖一还原效果的影响，确定了常温下这种碳源所需要的最适宜工况条件，探讨了硫酸盐矿山废水的水质资源化问题，并对山西矿山废水的生物治理进行了可行性实验验证。实验证明，玉米芯为碳源时，矿山废水中SO^2-4的出水值可达221．1mg／L，金属离子的浓度也都达到了生活饮用水的质量标准，所以玉米芯可作为酸性矿山废水资源化生物处理的合适有效碳源。     

关于亚硫酸钙氧化过程中一些问题的探讨

介绍了亚硫酸钙氧化为石膏的反应机理及影响反应过程的某些因素。对某厂工程实践中出现的问题进行了解释,并提出了指导性建议。     

Thermal and hydrometallurgical recovery methods of heavy metals from municipal solid waste fly ash

Heavy metals in fly ash from municipal solid waste incinerators are present in high concentrations. Therefore fly ash must be treated as a hazardous material. On the other hand, it may be a potential source of heavy metals. Zinc, lead, cadmium, and copper can be relatively easily removed during the thermal treatment of fly ash, e.g. in the form of chlorides. In return, wet extraction methods could provide promising results for these elements including chromium and nickel. The aim of this study was to investigate and compare thermal and hydrometallurgical treatment of municipal solid waste fly ash. Thermal treatment of fly ash was performed in a rotary reactor at temperatures between 950 and 1050 °C and in a muffle oven at temperatures from 500 to 1200 °C. The removal more than 90% was reached by easy volatile heavy metals such as cadmium and lead and also by copper, however at higher temperature in the muffle oven. The alkaline (sodium hydroxide) and acid (sulphuric acid) leaching of the fly ash was carried out while the influence of temperature, time, concentration, and liquid/solid ratio were investigated. The combination of alkaline-acidic leaching enhanced the removal of, namely, zinc, chromium and nickel.