海水中氰化物测定方法探讨

对应用异烟酸 吡唑啉酮分光光度法测定海水中氰化物的方法进行了补充和改进,提高了海水氰化物测定方法的精密度和准确度。     

BCO分光光度法快速测定含铜三氯化铁蚀刻废液中的铜

采用双环已酮草酰二腙 (简称BCO)光度法 ,对含铜三氯化铁蚀刻废液综合利用过程中铜的快速测定进行了研究。重点对铁基体对于铜测定的干扰情况进行了研究。在选择的最佳分析条件下 ,测定三氯化铁蚀刻废液综合利用过程含铜浓度为 0 4 6g L的还原液时 ,其相对标准偏差和加标回收率分别为 1 0 5 %、99 2 1%、10 0 2 %。本方法简单快速 ,测定 1～ 2个样品仅需 30min。     

活性艳红X-3B微波辅助光催化脱色的研究

研究了微波辅助光催化氧化(MW/UV/TiO2)处理活性艳红(X 3B)模拟废水。结果表明:400mg/LX 3B在反应150min时的脱色率由UV/TiO2体系的7.07%、MW体系的13.52%提高到了MW/UV/TiO2体系的56.35%。脱色反应速率随初始浓度(CX 3B)的增大而减慢;在强酸性介质中,脱色率更高;光照度(E)越强,越有利于X 3B脱色反应;改变催化剂投加量对X 3B脱色影响不大;H2O2浓度增加,X 3B脱色率升高;在以上条件下,X 3B的脱色反应均符合一级反应动力学方程,脱色反应中同时存在自由基反应与直接光解反应。     

生物砂滤池对有机物和氨氮的去除

当在常规工艺前加生物预处理并取消预加氯时,砂滤池就成为生物砂滤池。与普通砂滤池相比其对有机物、氨氮和浊度的去除率都有很大的提高。实验以珠江源水为水源研究了生物砂滤池对高锰酸盐指数、NH3-N、NO2--N和浊度的去除,在实验期间生物砂滤池出水高锰酸盐指数、NH3-N、浊度平均值分别为1.32mg/L、0.098mg/L、0.171NTU,其相对于沉淀池出水的高锰酸盐指数、NH3-N、浊度的平均去除率分别为18.52%、72.93%、64.45%,而砂滤池出水NO2--N几乎检测不出来。滤池进水与出水溶解氧的变化也证明了砂滤池中生物的存在,并且生长状况良好。     

微型生物与金属腐蚀的研究

主要研究了海洋微生物与金属腐蚀的相关性。通过调查、分析海洋微生物的性质,尤其是硫酸盐还原菌（ＳＲＢ）,用移植埋片法对海底沉积物中ＳＲＢ含量的分析,建立了ＳＲＢ含量与腐蚀率之间的表象关系,为海洋工程设计提供了重要数据。     

Adsorption selectivity of salicylic acid and 5-sulfosalicylic acid onto hypercrosslinked polymeric adsorbents

Both bottle-point and column-feeding experiments involving different solutes and sorbents were carried out to investigate the adsorption selectivity and separation performance of salicylic acid and 5-sulfosalicylic acid. Their adsorption isotherms onto such hypercrosslinked polymeric adsorbents as NDA-100 and NDA-99 could be well described by the Freundlich equations whose characteristics describe extrathermic and favorable adsorption processes. The adsorption towards NDA-100 mainly depended on the π-π interaction, while that towards NDA-99 was extremely influenced by the static-electric interaction. Additionally, the adsorptive capacity of salicylic acid on NDA-99 decreased while it increased on NDA-100 with the presence of 5-sulfosalicylic acid in the adsorptive environment as the competitive component. Comparatively, the adsorption capacity of 5-sulfosalicylic acid decreased on both resins with salicylic acid as the competitive component. In fact, the difference in the interaction between adsorbent and adsorbate resulted in the straight antagonism on the effective adsorption sites on the adsorbent. In conclusion, the adsorption selectivity of salicylic acid onto NDA-100 was obviously larger than that onto NDA-99 with the existence of 5-sulfosalicylic acid in the adsorptive environment. A satisfactory separation and recovery of tested solutes in aqueous phase could be foreseeably achieved by the sequencing adsorption technique involving NDA-100 as well as NDA-99. Translated from Environmental Pollution & Control, 2005, 27(8): 570–574 [译自: 环境污染与防治]     

离子强度、pH值和Ca2+/Al3+对马尾松幼苗的铝毒影响

测定了在不同溶液酸度、不同离子强度和Ca~(2+)/Al~(3+)比下,铝对马尾松幼苗生长状况的影响。结果表明,溶液酸度增加,离子强度减小时,铝的毒害作用增大。钙对铝毒有明显缓解作用,当Ca~(2+)/Al~(3+)增大时,铝的毒性减小,但其缓解作用与铝浓度有关,当铝浓度增加,钙的缓解能力下降。     

微絮凝双层滤料过滤处理含油废水试验研究

针对机电和机械加工行业排水中含油废水的特性 ,提出了微絮凝双层滤料过滤法处理工艺。通过实验 ,肯定了其良好的除油效果 ,并对影响除油率的因素进行了分析讨论 ,确定了处理工艺流程及合理的设计参数     

Effects of simulated acid rain on cation release in soils of South China

This paper deals with the release of base cations and Al3+ at the treatment with simulated acid rain (SAR) in main soil types collected from South China. Results showed that the amounts of base cations increased obviously when the pH value of simulated acid rain was lower than 3.0 or 3.5. Compared with the leaching of K+ and Na+, the leaching of Ca2+ and Mg2+ was affected by the pH value of SAR. Only when the amounts of base cations leached from soils exceeded the cation exchange capacity, the pH value of leaching solutions decreased sharply and the amounts of released Al3+ increased. The H+ buffering mechanisms, which were affected notonly by the pH values of SAR, but also by the types and solid components of soils, were proposed for the main soils studied.     

Efficient degradation of organic pollutants by S-NaTaO3/biochar under visible light and the photocatalytic performance of a permonosulfate-based dual-effect catalytic system

Removing large concentrations of organic pollutants from water efficiently and quickly under visible light is essential to developing photocatalytic technology and improving solar energy efficiency. This study used a simple hydrothermal method to prepare a non-metallic, S-doped NaTaO₃ (S-NTO) photocatalyst, which was then loaded onto biochar (BC) to form a S-NTO/BC composite photocatalyst. After uniform loading onto BC, the S-NTO particles transformed from cubic to spherical. The photogenerated electron-hole pair recombination probability of the composite photocatalyst was significantly lower than those of the NTO particles. The light absorption range of the catalyst was effectively widened from 310 nm UV region to visible region. In addition, a dual-effect catalytic system was constructed by introducing peroxymonosulfate (PMS) into the environment of the pollution to be degraded. The Rhodamine B, Methyl Orange, Acid Orange 7, tetracycline, and ciprofloxacin degradation efficiency at 40 mg/L reached 99.6%, 99.2%, 84.5%, 67.1%, and 70.7%, respectively, after irradiation by a 40 W lamps for 90 min. The high-efficiency visible-light catalytic activity of the dual-effect catalytic system was attributed to doping with non-metallic sulfur and loading of catalysts onto BC. The development of this dual-effect catalytic system provides new ideas for quickly and efficiently solving the problem of high-concentration organic pollution in aqueous environments, rationally and fully utilizing solar energy, and expanding the application of photocatalytic technology to practice.