焦化行业苯并芘排放量与厂界达标预测分析

论文以某100万吨/年焦化项目为例,分析其在不同地形和风速参数条件下苯并芘排放量,预测不同条件下距离焦炉炉体中心-1000～1000米范围内各网格点的苯并芘超标概率,最终得出风速、地形参数对苯并芘浓度超标概率的影响.     

Scale-up modeling of the twin roll casting process for AZ31 magnesium alloy

In the present study, a 2-D finite-element method (FEM) thermal-fluid-stress model has been developed and validated for the twin roll casting (TRC) of AZ31 magnesium alloy. The model was then used to quantify how the thermo-mechanical history experienced by the strip during TRC would change as the equipment was scaled up from a laboratory size (roll diameter = 355 mm) to a pilot scale (roll diameter = 600 mm) and to an industrial scale (roll diameter = 1150 mm) machine. The model predictions showed that the thermal history and solidification cooling rate experienced by the strip are not affected significantly by caster scale-up. However, the mechanical history experienced by the strip did change remarkably depending on the roll diameters. Casting with bigger rolls led to the development of higher stress levels at the strip surface. The roll separating force/mm width of strip was also predicted to increase significantly when the TRC was scaled to larger sizes. Using the model predicted results, the effect of both casting speed and roll diameter was integrated into an empirical equation to predict the exit temperature and the roll separating force for AZ31. Using this approach, a TRC process map was generated for AZ31 which included roll diameter and casting speed.     

预腐蚀LY12CZ铝合金的疲劳寿命预测模型

目的研究铝合金预腐蚀疲劳的寿命评估模型。方法利用损伤力学模型,建立预腐蚀构件疲劳寿命预测模型,并利用LY12CZ铝合金进行预腐蚀疲劳的验证性实验。结果利用损伤力学建立的模型所得到的预腐蚀铝合金试件的疲劳寿命与实验结果吻合程度良好。结论基于损伤力学的铝合金预腐蚀疲劳寿命预测模型合理有效。     

加速腐蚀环境下LD2CS铝合金腐蚀损伤分析方法

目的研究LD2CS铝合金腐蚀损伤数据的分析方法。方法针对LD2CS铝合金腐蚀坑深度值,采用最小二乘支持向量机、BP人工神经网络和求和自回归移动平均等3种模型进行回归和预测分析。对比总结各种模型在小样本递增时间序列下的应用特点。结果对于LD2CS铝合金腐蚀坑深度值预测,最小二乘支持向量机在回归和预测上都有较高的精度。结论最小二乘支持向量机模型最适合LD2CS铝合金的腐蚀坑深度值预测。     

铝粉表面超声波化学镀Ni-Co合金的研究

目的在铝粉表面进行镀Ni-Co合金层的研究,为制备新型的空心陶瓷吸波材料提供基础原料。方法利用超声波化学镀法。结果铝粉经过超声波化学镀Ni-Co合金,质量增加平均百分率达到了89.0%,通过SEM,EDS和XRD分析,表明在铝粉表面形成了Ni-Co合金层。结论利用超声波化学镀法能够在铝粉表面形成Ni-Co合金层。     

K_2Cr_2O_7法和紫外分光光度法测定污水COD的对比研究

分别利用重铬酸钾法、重铬酸钾紫外分光光度法和紫外分光光度法测定污水的COD极差分别为2.43mg/L、1.19 mg/L和4.72 mg/L,RE%分别为0.84%、0.53%和1.36%,重铬酸钾紫外分光光度法和紫外分光光度法的线性范围分别在0~280 mg/L和0~400 mg/L.结果表明:重铬酸钾紫外分光光度法测定的准确度和精密度最高,简化了用标准溶液进行标定的步骤,缩短了实验时间;紫外分光光度法测定的结果准确度和精密度相对差一些,但是快速、操作简单、节省试剂,为广大环境工作者提供借鉴参考的实例。     

湿地基质及阴极面积对人工湿地型微生物燃料电池去除偶氮染料同步产电的影响

本研究采用人工湿地型微生物燃料电池处理偶氮染料X-3B,实现降解偶氮染料同步产电的效果.为了构建性能最优的人工湿地型微生物燃料电池(CW-MFC)系统,本研究主要从湿地基质和阴极面积两个方面研究系统构型对去除X-3B同步产电的影响,提高系统性能.研究表明以粒径10 mm、孔隙率30%的小石子作为湿地基质构造的CW-MFC系统微生物生物量最大,去除X-3B效果最好,脱色率高达92.70%,但其产电性能最差.较小的粒径和孔隙率使底层微生物生物量增加,促进X-3B的去除,但随着湿地基质粒径和孔隙率的减小,导致阴阳极营养物质不足,系统传质阻力增加,抑制了系统产电性能.X-3B的去除效果随着阴极面积的增加而提高直到阴极面积为594 cm~2时取得最大脱色率99.41%.当阴极面积继续增加时,CW-MFC系统产电性能上升趋势趋于平缓,X-3B去除效果呈现下降趋势,这是因为阴极反应过快导致更多的阳极电子输送到阴极用于产生电流,与X-3B发生反应的电子减少,阳极成为提高CW-MFC系统性能的限制因素.     

中国铝生命周期能耗与碳排放的情景分析及减排对策

铝工业是高能耗高排放工业,探索铝工业的节能减排路径有助于我国实现《巴黎协定》中的温室气体减排承诺.采用物质流分析和生命周期评价方法,基于存量水平、技术水平和能源结构设置了15种情景,研究了我国铝工业1990～2100年的能耗和碳排放量,探索不同路径下的节能减排潜力.我国铝在用存量将在2040～2050年达到峰值(4.6...     

铝粉爆炸无火焰泄压技术及装备研究

为有效防止粉尘爆炸泄爆引起的二次爆炸及火灾问题,基于泄压理论、消火机理,设计开发无火焰泄压装置,装置主要由消火结构、底座、爆破片及夹持机构组成,消火结构由不锈钢金属丝网组成。选择铝粉尘为测试粉尘,通过自建除尘系统试验平台进行试验研究。结果表明:无火焰泄压装置可成功阻止火焰传播,装置释放的冲击波在5 m外均小于5 kPa,除尘系统内部最大泄爆压力为0.1 MPa,装置前端火焰传播速度均大于100 m/s。     

Study of the influence of melamine polyphosphate and aluminum hydroxide on the flame propagation and explosion overpressure of aluminum magnesium alloy dust

When aluminum magnesium alloy dust floats in the air, a certain ignition energy can easily cause an accidental explosion. To prevent and control the occurrence of accidental explosions and reduce the severity of accidents, it is necessary to carry out research on the explosion suppression of aluminum magnesium alloy dust. This paper uses a vertical glass tube experimental device and a 20 L spherical explosive experimental device to carry out experimental studies on the suppression of the flame propagation and explosion overpressure of aluminum magnesium alloy dust with melamine polyphosphate (MPP) and Al(OH)₃. With increasing MPP and Al(OH)₃ concentrations, the flame brightness darkened, the flame velocity and propagation distance gradually decreased, and P_max and (dp/dt)_max decreased significantly. When the amount of MPP added reached 60%, the flame propagation distance decreased to 188 mm, which is a decrease of 68%, and the explosion overpressure decreased to 0.014 MPa, effectively suppressing the explosion of aluminum magnesium alloy dust. The experimental results showed that MPP was more effective than Al(OH)₃ in inhibiting the flame propagation and explosion overpressure of the aluminum magnesium alloy dust. Finally, the inhibitory mechanisms of the MPP and Al(OH)₃ were further investigated. The MPP and Al(OH)₃ endothermic decomposition produced an inert gas, diluted the oxygen concentration and trapped active radicals to terminate the combustion chain reaction.