电凝聚处理轧制乳化废水的研究

用电凝聚法处理轧制乳化废水,探讨了影响破乳的各种因素,确定了最佳处理条件。研究结果表明:该法处理轧制乳化废水的效果很好,浊度去除率可达99.6%,COD去除率达99.5%。此外,还发现电凝聚法的处理效果优于药剂絮凝法。     

循环悬浮式半干法烟气脱硫技术在煤粉锅炉中的应用

半千法烟气脱硫技术目前在国内正在快速推广应用中，但成功的实例还较少，还存在系统不可靠，技术指标达不到，故障率高等问题。介绍了循环悬浮式半千法烟气脱硫技术及首次在煤粉锅炉中应用的烟气净化新工艺：静电预除尘＋循环悬浮式半干法烟气脱硫＋布袋除尘，论述了净化原理及在我厂的实际应用情况。     

环境激素双酚A释放及降解进展

通过对环境激素双酚A的概念、危害、应用、释放、降解与去除的介绍，指出在今后的科研工作中，加强双酚A降解菌的筛选，并研究其生理、生化、遗传特性，对从分子水平了解其降解机制以及构建高效工程菌具有重要意义。     

染料废水的治理现状及展望

介绍了染料废水的处理现状,目前国内外主要的处理方法有物化法(常用的有吸附法、混凝法、膜技术等)、化学法(如氧化法、电解法等)和生化法(投菌法微生物降解,好氧/厌氧工艺),介绍了各种工艺方法处理染料废水的实例并指出了各方法的优缺点和技术的关键,最后对今后染料废水处理技术的发展进行了展望。     

壳聚糖/PVA微粒上Cu2+的吸附平衡与动力学

采用粒径＜200μm、在酸碱介质中溶胀率小且能稳定存在的壳聚糖/PVA微粒对Cu2+的吸附进行了研究,结果表明,在pH 6,室温条件下,其饱合吸附量达56.0mg/g,随温度升高,吸附量降低.通过计算不同温度下各热力学参数△G0、△H0和△S0,证实该吸附为自发的放热过程.对实验数据运用相关数学模型拟合,显示等温吸附平衡符合Langmuir模型,吸附过程动力学更适合二级反应,被吸附在壳聚糖/PVA微粒上的Cu2+,可被0.01mo/L的EDTS或HNO3溶液快速地脱附出来,其洗脱率分别为85.3%和65.9%.     

Enhanced activity of ZnS(111) by N/Cu co-doping:Accelerated degradation of organic pollutants under visible light

High-efficiency photocatalysts are of great significance for the application of photocatalytic technology in water treatment.In this study,N/Cu co-doped ZnS nanosphere photocatalys(N/Cu-ZnS) is synthesized by a hydrothermal method for the first time.After doping,the tex ture of nanosphere becomes loose,the nanometer diameter is reduced,making the specific surface area of catalyst increased from 34.73 to 101.59 m²/g.The characterization results show that more ZnS (111) crystal planes a...     

PVC包装材料中酞酸酯增塑剂残留的ASE-GC-MS分析

针对PVC包装材料中酞酸酯（PAEs）增塑剂残留，采用加速溶剂萃取（ASE）和GC／MS联用技术分析5种PAEs（DMP，DEP，DBP，BBP，DEHP），结果表明加速溶剂萃取用于PVC包装材料中PAEs的提取，最佳温度条件为120℃，最佳循环次数为3次。方法检出限达到0．1mg／kg，回收率达到95．5％-99．8％；并且具有很好的重现性和精密度。     

一种化纤废水处理的运行及分析

化纤废水含有各种难降解有机物，国内外一直未能提出一套较好的处理方法，本文介绍了一种化纤废水的研究，处理工艺及其主要设计参数以及运行管理，事实证明了这种方法是可行的，其具有处理效果稳产，产泥量少，具有一定的消泡作用等优点。     

Cu／A1-Ce-PILC在丙烯选择性催化还原NO反应中的失活研究

采用聚合羟基复合阳离子合成交联黏土A1-Ce-PILC，经SO4^2-改性后，以浸渍法制备了铜基交联黏土催化剂Cu／A1-Ce-PILC，并将其应用于C3H6选择性催化还原NO的反应，350℃时NO转化率达到最大值56％，700℃时下降至22％．为探究催化剂高温失活的原因，采用XPS、TPR、TGA、Py-IR和DSC对反应前后催化剂的物化性能进行了表征．结果表明，经过H2预处理活化后活性组分Cu物种以Cu^＋形式存在，而高温反应后Cu物种除以Cu^＋和Cu^2＋ 2种形式存在外，还出现了少量CuO物种；高温反应过程中A1-Ce-PILC上结构羟基和SO4^2-流失导致催化剂表面酸性减弱；此外，还存在表面积炭覆盖了部分活性中心并堵塞了催化剂孔道的现象．这三者的共同影响促进了C3H6深度氧化，抑制了NO还原，从而导致催化剂的失活．     

Carbon isotope ratios in logged and unlogged boreal forests: Examination of the potential for determining wildlife habitat use

Due to assimilation of recycled CO₂ from litter decomposition and photosynthetic changes in carbon fractionation at low light levels, the foliage at the base of a forest is often more depleted in¹³C compared to that exposed to the atmosphere in either the canopy or in open clearings. This is referred to as the canopy effect. African research has indicated that these habitat differences in foliar ¹³C can be substantial enough to affect the carbon isotope ratios of resident fauna. Previous work documenting a 30-year chronology on moose teeth from Isle Royale National Park indicated a progressive depletion in¹³C and suggested that this could be due to forest regrowth following extensive burning. The present study examined the assumption implicit in this hypothesis that foliar ¹³C varies between open and closed boreal forest sites. I found a marginal canopy effect of 2 ¹³C difference between upper canopy and ground flora for a forest in northwestern Ontario and an average difference of 1.2 in under- and mid-story vegetation between closed forests and open clear-cuts. Because of these small differences, the utility of carbon isotope analysis in quantifying temporally integrated exploitation of deforested habitats will be low for northern boreal locations. In denser forests, such as those in the tropics or western North American where the canopy effect can be expected to be much greater, ¹³C analysis may still offer some promise for determining selection by wildlife of disturbed habitats.