流化床光催化反应器动力学模式

提出二相流化床光催化反应器的理论计算数学模式,并通过试验对其进行了验证和分析．结果表明,理论计算值与试验值一致该数学模式可用于流化床光催化反应器的设计计算,相对误差小于0.15％．     

闽江河口短叶茳芏湿地CH4和N2 O排放对氮输入的短期响应

利用静态箱-气相色谱法,研究了氮输入对闽江河口短叶茳芏湿地CH4和N2O排放通量的短期影响.结果表明,高氮输入在不同采样时间均促进了湿地CH4排放,低氮输入在不同时间则具有不同的变化特征.与对照处理相比,低氮和高氮2种处理分别使湿地CH4排放通量增加了-44.35%～1 057.35%和7.15%～667.37%.外源氮输入在24 h内对湿地N2O排放通量具有明显的正激发效应,最高可增加171.60倍和177.79倍,但在8 d后,氮输入对湿地N2O排放的激发效应减弱甚至消失.氮输入在短时间内对湿地土壤Ec、pH和Eh均未产生显著影响.湿地CH4排放通量在对照处理下仅与5 cm Eh存在显著负相关,在低氮处理下仅与10 cm地温呈显著负相关,在高氮处理下则与5 cm Ec、0、5 cm pH以及0、5、10 cm土壤Eh均呈显著相关性,而N2O排放通量在不同处理下与湿地气温、地温、盐度、pH和Eh等环境因子均不存在显著相关性.研究表明,探讨氮输入对湿地温室气体排放的影响应考虑其时间变异性.     

表面喷丸对Aermet100钢耐蚀性影响

目的 探究表面喷丸处理对于Aermet100钢耐蚀性能的影响。方法 借助显微观察、电化学测量及XRD分析等手段,开展喷丸与未喷丸2类A100钢试件的中性盐雾试验。结果 腐蚀形貌上,两者腐蚀表面变化均为先出现红褐色物质,后出现红棕色与绿色絮状物,在出现变化的时间上相差约1个周期。随着腐蚀时间增长,XRD衍射峰发生右移,2类试件XRD结果均在144 h变化明显。中性盐雾试验电化学结果与海洋环境下电化学结果在溶液电阻、腐蚀产物电阻和腐蚀反应电阻上均有差异,自腐蚀电位略低,自腐蚀电流则低了2个数量级。结论 两者腐蚀现象规律一致,XRD衍射峰右移表明试件晶格参数变小。2类试件腐蚀速率呈现增加到减缓再到增加的趋势。喷丸能明显提高A100钢的耐蚀性。     

废弃电器电子产品POPs/PTS减排环境管理实践研究

全球环境基金(GEF)"通过环境无害化管理减少电器电子产品的生命周期内持久性有机污染物和持久性有毒化学品(POPs/PTS)的排放全额示范项目"湖北省作为项目示范省之一.三家废弃电器电子产品拆解企业,分别开展了废弃电器电子产品拆解技术示范、湿法废弃印刷电路板处置BAT/BEP技术示范、利用再生铅连续熔炼炉协同处置阴极射线管含铅锥玻璃项目技术示范.电子废弃物全自动化分类与拆解生产线,为电子废弃物绿色循环与资源化提供了示范模式.     

可溶性有机质对芘在泥炭和高岭土上吸附和解吸的影响

为掌握可溶性有机质(DOM)对憎水性有机污染物吸附和解吸行为的影响,本研究选取四环多环芳烃——芘作为目标污染物,通过批平衡实验研究了不同分子量组分DOM对芘在泥炭和高岭土上吸附和解吸的影响.结果表明,吸附和解吸数据均可以用Freundlich模型很好地拟合(R²>0.93).DOM的添加抑制了泥炭对芘的吸附,并且分子量越大的DOM产生的抑制效应越明显,主要是由于DOM与芘分子的竞争、增溶作用及泥炭表面微孔的堵塞引起的.与之相反,DOM促进了芘在高岭土上的吸附,DOM分子量越大,促进效应越强,这是由于DOM与芘分子之间通过累积吸附或共吸附增加高岭土对芘的吸附.DOM促进了芘在泥炭和高岭土上的解吸,并且促进效应随分子量的增加而增强.此外,芘在泥炭和高岭土上的解吸均存在迟滞现象,均在低浓度时表现出更明显的效应.DOM_bulk和DOM_(>14000 Da)增加了芘在泥炭上的解吸迟滞现象,但降低了其在高岭土上的解吸迟滞现象.     

USB反应器进行生物反硝化的研究现状与应用前景

综述了USB反应器进行生物反硝化的历史沿革、研究现状 ,并对其在研究中存在的问题进行了描述。最后 ,对USB反应器进行生物反硝化的应用前景作了科学的分析     

The formation of aerobic granular sludge for the treatment of real landfill leachate using a granular sequencing batch reactor at a constant volume

Leachate generated in a landfill may not be treated by conventional biological treatment due to its nature and complexity. The process of forming aerobic granules in batch sequencing reactors having features such as; reducing the settling process time and saving energy consumption and high decomposition rate have been noticed by researchers. In the present study, the structure of sequencing batch reactors (SBRs) was evaluated for the formation of granules, which were subsequently utilized for the treatment of landfill leachate. The experiment was initiated by using the GSBR, containing 1200 ml with different apparatuses, to develop granular sludge, and synthetic wastewater was added to reinforcement. The selected parameters for the operational hydraulic retention time (HRT) of the wastewater (6-h cycles) included feeding, idle, aeration, settling, and discharge. Furthermore, the controlled conditions were the dissolved oxygen (DO) range of 2–2.2 mg/L, temperature range of 20–23℃, and pH of 7.5–8.3. The chemical oxygen demand (COD), mixed liquor suspended solids (MLSS), and sludge volume index (SVI) daily were measured at the influent and effluent of GSBR reactor. The main properties of aerobic granular sludge were identified during the research procedures, and the remarkable settling and potent, high-density microbial structure of the granules were confirmed. The mean size of the formulated granules was estimated at 7.46 ± 1.8 mm, and the volume of the biomass also increased from approximately 1607 to 4137 mg/L through the granulation process. Moreover, 98% of the influent chemical oxygen demand (COD) could be removed by the formulated granular sludge, and the final-stage organic loading rate was estimated at 5.65 COD/m³/day. According to the results, GSBRs could be employed for the formulation of aerobic granular sludge for the treatment of landfill leachate.     

Integrating channel design and assessment methods based on sediment transport capacity in gravel bed streams

Natural channel design (NCD) and analytical channel design (ACD) are two competing approaches to stable channel design that share fundamental similarities in accounting for sediment transport processes with designs based on hybrid fluvial geomorphology and hydraulic engineering methods. In this paper, we highlight the linkage between ACD's capacity/supply ratio (CSR) and NCD's sediment capacity models (FLOWSED/POWERSED), illustrating how ACD and NCD have reached a point of convergent evolution within the stream restoration toolbox. We modified an existing CSR analytical spreadsheet tool which enabled us to predict relative channel stability using both conventional bed load transport equations and regional sediment regression curves. The stable channel design solutions based on measured data most closely matched the Parker (ACD) and/or Pagosa good/fair (NCD) relationships, which also showed the greatest CSR sensitivity in response to channel alterations. We found that CSR differences among the transport relationships became more extreme the further the design width deviated from the supply reach, suggesting that a stable upstream supply reach may serve as the best design analog. With this paper, we take a step toward resolving lingering controversy in the field of stream restoration, advancing the science and practice by reconciling key differences between ACD and NCD in the context of reach scale morphodynamics.     

生活垃圾堆肥工艺条件及其反应动力学研究

为了改善堆肥微环境 ,提高生活垃圾堆肥速率 ,研究堆肥工艺条件及其反应动力学是非常必要的。通过控制堆肥工艺条件 ,如初始温度、含水率、C/N比及堆料颗粒大小 ,研究生活垃圾堆肥过程中生物、化学及物理因素的变化。试验结果表明 ,生活垃圾堆肥反应符合一级反应动力学 ;合理控制堆肥初始反应条件 ,能明显提高堆肥效率。     

软锰矿浆烟气脱硫反应器试验研究

研究了喷射鼓泡反应器 (JBR)的桨叶直径、桨叶埋深和气体喷射管分布等结构参数对脱硫率和锰浸出率的影响 ,从而优化了反应器结构。