恐惧诉求对职业驾驶员安全驾驶态度和行为意向的影响

研究以EPPM模型作为理论框架,探讨恐惧诉求对危险驾驶行为(超速和不系安全带)态度和行为意向的作用。54名职业驾驶员在观看交通安全恐惧诉求录像后,完成安全驾驶行为问卷。回归分析表明恐惧诉求的交通事故录像能够改变驾驶员对超速及不系安全带驾驶的态度和行为意向,但作用不完全一致。恐惧情绪唤起通过恐惧情感所引发的威胁评估过程中介对不超速行为意向的影响。最后,对研究的局限和未来的研究进行讨论。     

Effect of Sweating on Insulation of Footwear

The study aimed to find out the influence of sweating on footwear insulation with a thermal foot model. Simultaneously, the influence of applied weight (35 kg), sock, and steel toe cap were studied. Water to 3 sweat glands was supplied with a pump at the rate of 10 g/hr in total. Four models of boots with steel toe caps were tested. The same models were manufactured also without steel toe. Sweating reduced footwear insulation 19–25% (30–37% in toes). During static conditions, only a minimal amount of sweat evaporated from boots. Weight affected sole insulation: Reduction depended on compressibility of sole material. The influence of steel toe varied with insulation. The method of thermal foot model appears to be a practical tool for footwear evaluation.     

Determination of Heat Loss from the Feet and Insulation of the Footwear

This study compared the methods of determining footwear insulation on human participants and a thermal foot model. Another purpose was to find the minimal number of measurement points on the human foot that is needed for insulation calculation. A bare foot was tested at 3 ambient temperatures on 6 participants. Three types of footwear were tested on 2 participants. The mean insulation for a bare foot obtained on the participant and model were similar. The insulation of warm footwear measured by the 2 methods was also similar. For thin footwear the insulation values from the participants were higher than those from the thermal model. The differences could be related to undefined physiological factors. Two points on the foot can be enough to measure the insulation of footwear on human participants (r = .98). However, due to the big individual differences of humans, and good repeatability and simplicity of thermal foot method, the latter should be preferred for testing.     

A Comparison of Two Methods of Determining Thermal Properties of Footwear

The present European Standard for footwear testing (Standard No. EN 344:1992; European Committee for Standardization [CEN], 1992) classifies footwear thermally by a temperature drop inside the footwear during 30 min at defined conditions. Today, other methods for footwear thermal testing are also available. The aim of this study was to compare EN 344:1992 with a thermal foot method. Six boots were tested according to both methods. Additional tests with modified standard tests were also carried out. The methods ranked the footwear in a similar way. However, the test according to standard EN 344:1992 is a pass-or-fail test, whereas data that is gained from the thermal foot method gives more information and allows further use in research and product development. A change of the present standard method is suggested.     

扬沸火灾发生时间预测模型的建立与应用分析

原油储罐扬沸火灾由池火灾发展而成,是一种危害性极大的事故.准确预测扬沸事故发生的时间,是扬沸机理研究中的难题之一.现有扬沸时间计算的通用模型由于没有考虑油品的粘性作用,计算结果误差较大.把扬沸火灾简化为无内热源的非稳态传热问题,在此基础上进行传热分析,进而推导出扬沸事故时间计算模型.设定了6组不同尺寸和不同充装水平的原油储罐池火灾,利用推导模型计算出了相应的扬沸事故发生时间.将计算结果与通用模型计算结果以及实验结果进行对比:该模型的准确性由于通用模型,计算结果与实验值误差较小,较为合理.研究结果对于扬沸火灾事故下消防人员的灭火救援的安全保障具有重要意义.     

数量化理论Ⅲ及其在煤与瓦斯突出危险性评估中的应用

研究了数量化理论Ⅲ建立煤与瓦斯突出危险性的原理和方法,以瓦斯地质学理论为基础,建立了包括煤层瓦斯含量、煤层瓦斯压力、煤层分岔合并现象、地质构造复杂程度、煤的破坏类型等11个地质因素的煤层突出危险性评估指标体系。以数量化理论Ⅲ为工具,实例分析得出马依西一井3煤层突出危险性的敏感地质因素及因素轴F1,以该轴上得分大于0.1的地质因素作为强突出的敏感地质因素;得分小于-0.1的地质因素作为弱突出的敏感地质因素,得分在0.1--0.1之间的地质因素作为中等突出的敏感地质因素,将矿井划分为强突出、中等突出和弱突出三个区域。该方法实现了地勘阶段煤与瓦斯突出的定量分析,进一步细化了突出区域的划分。     

某铁矿职业病预评价中危害因素的识别与分析

职业病危害因素识别与分析是职业病危害预评价的基础,识别与分析的结果直接关系到职业病危害预评价结论的合理性和科学性。以某铁矿职业病危害预评价为例,重点阐述了系统工程分析法和类比调查法在预评价中职业病危害因素识别与分析的应用。通过对原辅材料、生产工艺和设备以及类比工程进行分析,识别了某铁矿可能存在的职业病危害因素,并分析了职业病危害程度,得出来了凿岩工是白指病、噪声聋、尘肺的易感人群,球磨工和破碎工罹患尘肺病和噪声聋的概率较大,凿岩工、球磨工和破碎工是本项目重点保护对象和监护人群的结论。     

集对分析在煤炭自然发火危险性评价上的应用

为了解煤炭自然发火危险性程度,及时对采空区在发火前采取相关措施,对其进行发火危险性评价显得尤为重要。提出了基于集对分析的煤炭自然发火危险性评价方法,以集对分析理论为基础,将煤炭自然发火看成一个确定不确定系统,建立了煤炭自然发火评价模型。以梁家煤矿4110采空区为例,将计算结果与基于熵权未知理论的评价结果作比较,得出的结论一致。表明了集对分析运用在煤炭自然发火危险性评价上是可行的,可为矿井生产和其他系统的分析评价提供参考     

温度对烃类物质爆炸极限的影响及其预测模型研究

为研究温度对烃类气体爆炸极限的影响,利用爆炸极限测试仪对C1-C4烃类气体在20℃、60℃、100℃、140℃等初始温度条件下的爆炸极限进行了测试。结果表明:C1-C4烃类气体的爆炸下限在20-140℃范围内与温度呈线性关系,同一系列烃类物质,随着碳原子数的增加,同一温度下所对应的爆炸下限数值依次降低;对于相同碳原子数的烃类物质,相同温度下烷烃的爆炸下限数值高于烯烃的爆炸下限数值。此外,建立了高温条件下烃类物质爆炸极限的预测模型,为烃类物质爆炸极限的预测提供了一种方法。