ASSESSMENT OF REMOTE SENSING INPUT TO HYDROLOGIC MODELS1

Remotely sensed variables such as land cover type and snow-cover extent can currently be used directly and effectively in a few specific hydrologic models. Regression models can also be developed using physiographic and snow-cover data to permit estimation of discharge characteristics over extended periods such as a season or year. Most models, however, are not of an appropriate design to readily accept as input the various types of remote sensing parameters that can be obtained now or in the future. Because this new technology has the potential for producing hydrologic data that has significant information content on an areal basis, both inexpensively and repetitively, effort should be devoted now to either modifying existing models or developing new models that can use these data. Minor modifications would at least allow the remote sensing data to be used in an ancillary way to update the model state variables, whereas major structural modifications or new models would permit direct input of the data through remote sensing compatible algorithms. Although current remote sensing inputs to hydrologic models employ only visible and near infrared data, model modification or development should accommodate microwave and thermal infrared data that will be more widely available in the future.     

UPLAND SOIL EROSION SIMULATION FOR AGRICULTURAL WATERSHEDS1

ABSTRACT: A soil erosion simulation model that considered the physical conditions of agricultural watersheds and that interfaced with the modified USDAHL-74 watershed hydrology model was developed. The erosion model simulates the detachment and transport of soil particles caused by raindrop impact and overland flow from rill and interrill areas. The model considers temporal and spatial variation of plant residue, crop canopy cover, snow cover, and the moisture content of surface soil as modifying factors of the erosive forces of raindrop impact and overland flow. The hydrology model simulates overland flow and some of the physical parameters that are used in the erosion model. The simulation is executed in the time interval determined by the rainfall rate or snowmelt rate. The erosion model compares the transport capacity of the overland flow and the sediment loaded in the overland flow to determine the fate account for the free soil particles that have already been detached and are readily available to be transported by the overland flow. The model was tested with data from two small agricultural watersheds in the Palouse region of the Pacific Northwest dryland. The model was calibrated by trial-and-error to determine the coefficients of the model.     

OPTIMAL GROUND WATER MANAGEMENT IN TWO-AQUIFER SYSTEMS1

ABSTRACT; This paper presents a numerical model for the prediction of optimal ground water withdrawal from a two-aquifer system by observing a set of constraints determined by the ecological conditions of the ground water basin. The aquifer system consists of an upper unconfined and a lower confined aquifer with a leaky stratum between them. It is assumed that water is withdrawn from the confined aquifer only, but the unconfined aquifer will also be affected due to the leakiness of the layer separating the upper and lower aquifers. Simulation and linear programming are employed for developing a computer model for the optimal management of such systems, with the objectives of determining withdrawal rates for predetermined ground water levels.     

A MULTIOBJECTIVE,DISCRETE SYSTEM REPRESENTATION OF RANGELAND WATERSHEDS1

ABSTRACT: Resource utilization as practiced by humans is identified as the main cause of the degradation of rangeland watersheds, a process referred to as desertification. This paper introduces a multi-objective decision making methodology for the selection of a plan which if implemented should limit the desertification process. The evaluation objectives are measured by quantitative and qualitative criteria. The quantitative criteria provide the performance level for production and sediment yield, while the qualitative criteria give such information as public acceptance of a particular alternative or worth of an appropriate wildlife habitat. A system model is applied to describe the dynamics of a range site in response to climatic and human inputs. As such it provides the information required by the quantitative criteria as well as a range condition index that identifies the productivity of a given range site. A multiobjective selection procedure is presented that will lead to the appropriate technique from an available set, in this case ESAP, Environmental Sensitivity Analysis Package. Four individuals with diverse backgrounds in natural resource management participated as decision makers and decided on their preferred alternatives. Finally, ranked alternatives in agreement with all of the decision makers were obtained.     

FORECAST UNCERTAINTY IN WATER SUPPLY RESERVOIR OPERATION1

ABSTRACT: This research investigates the benefits of forecasting in water supply systems. Questions relating operational losses to forecast period and accuracy are addressed. Some simple available forecasting techniques are assessed for their accuracy and applicability. These issues are addressed through the use of a simulation model of the Cedar and South Fork Tolt Rivers, where the system is modeled as a single purpose reservoir supplying municipal and industrial water to the Seattle metropolitan area. The following conclusions were made for this system: (1) reservoir operation deteriorates markedly with the loss of forecast accuracy; (2) the optimal length of forecasting period is five months; (3) reservoir operation may be improved by as much as 88 percent if perfect predictive abilities are available; (4) the mean of the historic data is not recommended to predict future flows because Markov methods are always superior; and (5) lag-one autoregressive Markov schemes exhibit about a 9 percent improvement in operation over no forecasting.     

SENSITIVITY ANALYSIS OF A DRAINAGE SIMULATION MODEL1

A sensitivity analysis of a computer model, simulating major water and nitrogen processes of a soil-water-plant-climatic system on an annual basis, was conducted to determine how the model reacts to the variations in selected hydrologic and nitrogen parameters. Two major output variables (namely, total subsurface drain volume and cumulative nitrate loss with subsurface drain water) were selected for the sensitivity analysis. Model sensitivity analysis shows that the model is most sensitive to hydrologic parameters. The model is very sensitive to variations in the initial water content in the soil profile.     

Patchy distribution fields: sampling distance unit of a zigzag survey and reconstruction adequacy

A mathematical model was used to examine the effects of choosingvarious units of sampling distance of a zigzag survey on the adequacy of reconstructing patchy distribution fields. The modelsimulates fish or plankton patches (or gaps) of different shapesand spatial orientations, and an acoustic survey by zigzag or parallel transects along which a unit of sampling distance is set. Adequacy of the reconstructed fields to those originally generated is evaluated by calculating their correlations (r). A priori information on the autocorrelation radii for the field in the directions of the survey (R_s) and perpendiculardirection (R_p) allows optimisation of the survey design andthe algorithm of data analysis. A field can be reconstructed properly (r² > 0.70) if the distance between transects D < (1.0–1.5)R_s and the unit of sampling distance d < (1.0–1.5)R_p. A posteriori determination of patchorientation allows reconstruction of the best field attainable onthe basis of the survey data. In cases of field movement, if thedimension of patches in the direction of movement exceeds that ofa surveyed area, a survey in the opposite direction gives bestresults; in contrast, if the dimension of moving patches is smaller than that of a surveyed area, it is reasonable to carryout a survey in the same direction. The criterion remains validwhen a survey is carried out by zigzag transects and a unit ofsampling distance is set along them. The results obtained indicate that, for a fixed transect spacing and a given number of sampling points on each full transect, zigzag pattern allowsless adequate reconstruction of an original distribution field (in cases of both immovable and movable fields) than corresponding parallel pattern.     

The behaviour of heavy metals from the Guadalquivir estuary after the Aznalcóllar mining spill: field and laboratory surveys

The spill at `Los Frailes caused a large input of metals intothe riverine, estuarine and coastal ecosystems. Metal behaviourin natural waters can be studied both by performing fieldmeasurements, and by undertaking laboratory simulationexperiments. Here is described the behaviour of the heavymetals Zn, Cd, Pb and Cu in the Guadalquivir estuary usingincubation experiments and the results compared to thoseobtained during field assessments. If the toxic waste water hadbeen discharged untreated into the environment, it could haveraised the heavy metal concentrations in the estuary water tohigh values, such as 20.65 M for Zn and 40 × 10^-3 M for Cd. These values are several times higher than thoseobtained in samples collected in the area during the monitoringof the early impact. The metals present a non-conservative behaviour, with a high loss to waters of low salinity values.     

On the Performance and Applicability of Nonlinear Two-Equation Turbulence Models for Urban Air Quality Modelling

It is well known that the commonly used k- turbulence models yield inaccurate predictions for complex flow fields. One reason for this inaccuracy is the misrepresentation of Reynolds stress differences. Nonlinear turbulence models are capable to overcome this weakness while being not considerably more complex. However no comprehensive studies are known which analyze the performance of nonlinear turbulence models for three-dimensional flows around building-shaped structures. In the present study the predictions of the flow around a surface-mounted cube using three nonlinear two-equation turbulence models are discussed. The results are compared with predictions of the standard k- turbulence model and wind tunnel measurements. It is shown that the use of nonlinear turbulence models can be beneficial in predicting wind flows around buildings.     

Numerical simulation of the sedimentation of cylindrical pollutant particles in fluid

The sedimentation of cylindrical pollutant particles which fall through a fluid is investigated. Differing from previous research work,particle oscillation and effect of particle on the fluid are considered, and the torque exerted on a particle when viscous fluid flow around a particle is got through experiment and included in the numerical simulation. The computational results showed that the sedimentation velocities of particle increase slowly with the increase of particle aspect ratio 9. For disk-like particle, when the motion direction of particle is parallel to axis of particle, particle falls more slowly than the case of perpendicular to axis of particle; while for rod-like particle, it is inverse. For sedimentation of a crowd of high-frequency oscillating cylindrical particles with arbitrary initial orientation, both vertical velocity and horizontal velocity oscillate dramatically, the degree of oscillation of the former is stronger than the later. A crowd of particles fall more quickly than an isolated particle. Particles tend to strongly align in the direction of gravity. The computational results agreed well with the experimental ones and helpful for controlling of pollutant particles.