Testing of the Storm Water Management Model Low Impact Development Modules

Stormwater infrastructure designers and operators rely heavily on the United States Environmental Protection Agency’s Storm Water Management Model (SWMM) to simulate stormwater and wastewater infrastructure performance. Since its inception in the late 1970s, improvements and extensions have been tested and evaluated rigorously to verify the accuracy of the model. As a continuation of this progress, the main objective of this study was to quantify how accurately SWMM simulates the hydrologic activity of low impact development (LID) storm control measures. Model performance was evaluated by quantitatively comparing empirical data to model results using a multievent, multiobjective calibration method. The calibration methodology utilized the PEST software, a Parameter ESTimation tool, to determine unmeasured hydrologic parameters for SWMM’s LID modules. The calibrated LID modules’ Nash–Sutcliffe efficiencies averaged 0.81; average percent bias (PBIAS) ?9%; average ratio of root mean square error to standard deviation of measured values 0.485; average index of agreement 0.94; and the average volume error, simulated vs. observed, was +9%. SWMM accurately predicted the timing of peak flows, but usually underestimated their magnitudes by 10%. The average volume reduction, measured outflow volume divided by inflow volume, was 48%. We had more difficulty in calibrating one study, an infiltration trench, which identified a significant limitation of the current version of the SWMM LID module; it cannot simulate lateral exfiltration of water out of the storage layers of a LID storm control measure. This limitation is especially severe for a deep LIDs, such as infiltration trenches. Nevertheless, SWMM satisfactorily simulated the hydrologic performance of eight of the nine LID practices.     

三重四极杆质谱技术测定固体废弃物中多氯联苯

以二氯甲烷为萃取剂,采用快速溶剂萃取、凝胶渗透色谱净化、三重四极杆质谱技术测定固体废弃物中7种多氯联苯单体,选择十氯联苯为内标物,2,4,5,6-四氯间二甲苯为替代物。质谱采用MRM扫描,优化了目标物质保留时间、母离子和子离子质量数及碰撞能量等参数。方法在0.050 mg/L～2.00 mg/L范围内线性良好,7种多氯联苯单体的检出限为0.194 ng/g～0.355 ng/g(以称取30 g样品、定容至2.0 mL计),标准样品回收率多在60%～105%之间,空白加标样品测定值的相对标准偏差在8.6%～13.0%之间。     

Estimation of the liability to detonating of prilled ammonium nitrate fertiliser grade

The statistical analysis of the results of testing liability to detonation of coated and uncoated prilled ammonium nitrate was performed. The correlation between the crushing of the lead cylinders as a result of the so-called 4″ tube test and the chemical as well as the physical properties of ammonium nitrate were determined. The results demonstrated that the liability to detonation of ammonium nitrate may be estimated by use of mathematical equations, which employ easily obtainable experimental values relating to the chemical composition and physical properties of the tested fertilisers.     

五氯酚标准样品的研制

五氯酚是美国ＥＰＡ公布的１２９种重点污染物名单以及我国环境优先监测污染物黑名单中的重点污染物,也是环境监测和环境科研工作中的主要对象。本文介绍了这种污染物毒理特性和液体介质标准样品的分析、研究、制备方法。     

快速溶剂提取-气相色谱法测定土壤中19种多氯联苯单体

采用快速溶剂提取-Florisil固相萃取柱净化-气相色谱法测定土壤中多氯联苯单体,探讨了有机氯农药对测定的干扰。方法在0ug／L-100ug／L范围内线性良好,19种多氯联苯单体的检出限为0．06ug／kg-0．36ug／kg,基体加标回收率为78．6％-120％,RSD为0．2％-5．1％。     

分布式光纤测温技术在隧道火灾和渗漏探测中的应用

隧道火灾和渗漏一直是隧道安全和健康的重要问题。基于分布式光纤测温系统(DTS)具有能实现在线实时监测且实测温度随光纤沿程分布这一技术特点和优势,将单根分布式光纤应用于隧道火灾的预警预报、火灾定位、隧道渗漏定位,属国内首创。本文介绍了DTS测温原理和实测成果。实测情况表明,DTS系统测温精确,抗干扰性强,特别适合隧道火灾预警预报和渗漏探测,具有良好的应用前景。     

加速溶剂萃取-气相色谱质谱法同时测定土壤及沉积物中34种有机氯农药及18种多氯联苯类化合物

建立了加速溶剂萃取-气相色谱质谱法同时测定34种有机氯农药(OCPs)和18种多氯联苯类化合物(PCBs)的方法。当取样量为10. 0 g时,52种有机化合物的检出限为0. 03～0. 29μg/kg,以空白样品为基体进行加标回收试验,平均回收率为44. 7%～123. 0%,相对标准偏差(RSD,n=7)为1. 8%～21. 5%。该方法灵敏度高,实现了低浓度有机化合物的定量分析,分析结果准确可靠,满足土壤和沉积物中34种有机氯农药和18种多氯联苯类化合物分析的要求。     

改进环境影响评价制度监督管理方法的几点考虑

改进环境影响评价制度监督管理方法的几点考虑罗崇富ＳＵＧＧＥＳＴＩＯＮＯＦＩＭＰＲＯＶＩＮＧＳＵＰＥＲＶＩＳＩＯＮＡＮＤＭＡＮＡＧＥＭＥＮＴＯＦＥＩＡＳＹＳＴＥＭ￥ＬｕｏＣｈｏｎｇｆｕ（ＸｉｎｊｉａｎｇＥｎｖｉｒｏｎｍｅｎｔＭｏｎｉｔｏｒｉｎｇＣｅｎｔ...     

微机在栓接板面抗滑移系数试验中的应用

在微机数据库管理系统中,运行一自编程序,进行试验数据的处理及试验报告的自动打印.使用该程序处理试验数据,不仅速度快,而且内容准确、规范,可大大地提高工作效率.