Bacteria additives to the changes in gaseous mass transfer from stored swine manure

Abstract

A bacteria additives treatment experiment in assessing the changes in gaseous mass transfer from stored swine manure is presented. The experiment is tested for ammonia, methane, hydrogen sulfide, and carbon dioxide emission data sampled from pilot swine manure columns and analyzed by GC/MS. The result shows that bacteria additives slightly reduce the methane and carbon dioxide releases, while the same additives do not show any effect on the reduction of ammonia. The hydrogen sulfide contents of stored swine manure continued to be low. Gas concentrations emitted from treated and untreated stored swine manure were: 3.76 and 2.2 ppm for methane, 0.35 and 0.11 ppm for ammonia, and 1000 and 470 ppm for carbon dioxide, respectively. A simple model to estimate gas emission rates is also developed from the viewpoint of two‐film resistance theory. The average emission rates calculated from the model for methane, ammonia, and carbon dioxide are respectively: 0.01, 0.0005, and 13.98 g/min from untreated stored manure; while 0.07, 0.096, and 0.55 g/min from treated manure. The emission model also indicates that for most gaseous pollutants of environmental concern, liquid phase transfer coefficient controls the rate of volatile compounds emitted from stored swine manure and gas phase transfer coefficient has insignificant effect in the calculation of overall mass transfer coefficient.     

The Use of the Isotopic Composition of Individual Compounds for Correlating Spilled Oils and Refined Products in the Environment with Suspected Sources

Correlation of crude oils, or refined products, in the environment with suspected sources is typically undertaken through the use of GC and GCMS and in certain cases bulk carbon isotope compositions. However, with crude condensates, or refined products in particular, the absence, or low concentration, of biomarkers precludes their successful use for making unique correlations. An alternative and, sometimes, complimentary technique for correlation of such products is evolving through the use of combined gas chromatography-isotope ratio mass spectrometry (GCIRMS). This approach permits determination of the carbon and hydrogen isotopic composition of individual compounds in the crude oil or refined product to produce isotopic fingerprints for use in correlation studies. In this paper, it is proposed to review applications of GCIRMS to the correlation of various spilled products with their suspected sources in different environments. Whilst not proposing that this technique will replace GC or GCMS; it is proposed that GCIRMS is a very powerful tool to be used in conjunction with GC and GCMS to make such correlations. Although isotopic fractionation has been observed in some of the lighter components such as benzene and toluene, higher carbon numbered compounds, say above C 10 , do not appear to undergo any significant isotopic fractionation as a result of weathering. Furthermore with refined products, isotopic fractionation of the lighter components has the potential to demonstrate the onset of natural attenuation of refined products in the environment.     

Preliminary characterization and source assessment of PAHs in tributary sediments of the Athabasca River,Canada

The Athabasca Oil Sands are one of four natural oil sands deposits in Northern Alberta, Canada. As a number of new mines are planned in the area, there is a need to establish background levels of natural hydrocarbon release prior to these developments. To this end, various environmental samples were taken from selected tributaries in the oil sands region of the Athabasca River Basin and analysed by gas chromatography/mass spectrometry (GC/MS) for polycyclic aromatic hydrocarbons (PAHs) and their alkylated analogues. Samples were collected over 3 years (1998-2000) to provide an increased understanding of the spatial distribution, nature and extent of natural hydrocarbon release to the environment. Results indicated that levels of total PAHs were elevated in the tributaries (up to 34.7 µg/g) compared to the main stem Athabasca River (<2 µg/g). As expected, samples from the oil sands deposits contained the greatest amounts of PAHs and alkylated PAHs. Profiles of the alkylated PAM distributions were very similar, indicating that all the samples tested were from a common petrogenic source.     

Ion Composition Elucidation (ICE): an Investigative Tool for Characterization and Identification of Compounds of Regulatory Importance

Ion composition elucidation (ICE) often leads to identification of compounds and provides high-quality evidence for tracking compounds to their sources. Mass spectra for most organic compounds are not found in mass spectral libraries used to tentatively identify analytes. In addition, multiple matches are common. Ion Composition Elucidation provides the numbers of atoms of each element in the ions in the mass spectrum, greatly limiting the number of possible compounds that could produce the mass spectrum. Review of chemical and commercial literature then limits the number of possible compounds to one or a few that can be purchased to confirm tentative compound identifications by comparison of mass spectra and chromatographic retention times. Ion composition elucidation is conceptually simple relative to other analytical techniques and more easily explained to a judge or jury. It is based on sums of the exact masses of atoms and their isotopic abundances. Several applications of ICE are demonstrated for ultra-trace-level compounds in an extract of the e.uent from a tertiary sewage treatment plant including: (1) measurement of five values to determine an ion's composition and to generate evidence for the compound's identity, (2) rejection of incorrect library matches, (3) rapid screening for a target compound in an extract, and (4) a strategy for tracking unidentified compounds to their sources.     

Determination of biocides and pesticides by on-line solid phase extraction coupled with mass spectrometry and their behaviour in wastewater and surface water

This study focused on the input of hydrophilic biocides into the aquatic environment and on the efficiency of their removal in conventional wastewater treatment by a mass flux analysis. A fully automated method consisting of on-line solid phase extraction coupled to LC-ESI-MS/MS was developed and validated for the simultaneous trace determination of different biocidal compounds (1,2-benzisothiazoline-3-one (BIT), 3-Iodo-2-propynylbutyl-carbamate (IPBC), irgarol 1051 and 2-N-octyl-4-isothiazolinone (octhilinone, OIT), carbendazim, diazinon, diuron, isoproturon, mecoprop, terbutryn and terbutylazine) and pharmaceuticals (diclofenac and sulfamethoxazole) in wastewater and surface water. In the tertiary effluent, the highest average concentrations were determined for mecoprop (1010 ng/L) which was at comparable levels as the pharmaceuticals diclofenac (690 ng/L) and sulfamethoxazole (140 ng/L) but 1-2 orders of magnitude higher than the other biocidal compounds. Average eliminations for all compounds were usually below 50%. During rain events, increased residual amounts of biocidal contaminants are discharged to receiving surface waters.     

Bottom-up approach for the reaction of xenobiotics and their metabolites with model substances for natural organic matter by electrochemistry-mass spectrometry (EC-MS)

Risk assessment of xenobiotics requires a comprehensive understanding of their transformation in the environment. As most of the transformation processes usually involve a redox reaction or a hydrolysis as the first steps of the transformation, we applied an approach that uses an electrochemical cell to investigate model “redox” reactions in aqueous solutions for environmental processes. We investigated the degradation of a variety of xenobiotics from polar to nonpolar and analyzed their degradation products by on-line coupling of electrochemistry with mass spectrometry (EC-MS). Furthermore, we evaluated possible binding reactions with regard to the generation of non-extractable residues with some model substances (catechol, phthalic acid, γ-l-Glutamyl-l-cysteinyl-glycine (GSH) and l-histidine) deduced from a natural organic matter (NOM) structure model and identified possible binding-sites.Whereas typically investigations in soil/water-systems have been applied, we used to our knowledge for the first time a bottom-up approach, starting from the chemicals of interest and different model substances for natural organic matter to evaluate chemical binding mechanisms (or processes) in the EC-MS under redox conditions. Under oxidative conditions, bindings of the xenobiotics with catechol, GSH and histidine were found, but no reactions with the model compound phthalic acid were observed. In general, no chemical binding has yet been found under reductive conditions. In some cases (i.e. benzo[a]anthracene) the oxidation product only underwent a binding reaction, whereas the xenobiotic itself did not undergo any reactions.EC-MS is a promising fast and simple screening method to investigate the environmental behavior of xenobiotics and to evaluate the potential risks of newly synthesized substances.     

Microbial growth with vapor-phase substrate

Limited information exists on influences of the diffusive transport of volatile organic contaminants (VOC) on bacterial activity in the unsaturated zone of the terrestrial subsurface. Diffusion of VOC in the vapor-phase is much more efficient than in water and results in effective VOC transport and high bioavailability despite restricted mobility of bacteria in the vadose zone. Since many bacteria tend to accumulate at solid-water, solid-air and air-water interfaces, such phase boundaries are of a special interest for VOC-biodegradation. In an attempt to evaluate microbial activity toward air-borne substrates, this study investigated the spatio-temporal interplay between growth of Pseudomonas putida (NAH7) on vapor-phase naphthalene (NAPH) and its repercussion on vapor-phase NAPH concentrations. Our data demonstrate that growth rates of strain PpG7 were inversely correlated to the distance from the source of vapor-phase NAPH. Despite the high gas phase diffusivity of NAPH, microbial growth was absent at distances above 5 cm from the source when sufficient biomass was located in between. This indicates a high efficiency of suspended bacteria to acquire vapor-phase compounds and influence headspace concentration gradients at the centimeter-scale. It further suggests a crucial role of microorganisms as biofilters for gas-phase VOC emanating from contaminated groundwater or soil.     

Use of tracer tests to investigate changes in flow and transport properties due to bioclogging of porous media

Tracer tests were conducted in three laboratory columns to study changes in the hydraulic properties of a porous medium due to bioclogging. About 30 breakthrough curves (BTCs) for each column were obtained. The BTCs were analyzed using analytical equilibrium and dual-porosity models, and estimates of the hydrodynamic dispersion and mass transfer coefficients were obtained by curve fitting. The change in transport properties developed in three stages: an initial phase (I) with no significant changes in transport properties, phase II with growth of biomass near the inlet of the columns causing changes in dispersivity, and phase III with added growth of micro-colonies deeper in the columns causing mass transfer of solutes from the water phase to the biophase. Tracer transport changed from being uniform to more non-uniform with increase in mass transfer of the tracer between the mobile phase and the immobile biomass. An increase in the bulk dispersivity value of up to one order of magnitude was observed. Numerical simulations suggest that local dispersivity values may be as much as 40 times higher in the more severe clogged areas inside the column. The bulk hydraulic conductivities of the columns decreased by up to three orders of magnitude. The hydraulic conductivity and dispersivity parameters were almost recovered after disinfection of the columns. Different models relating the changes of the hydraulic conductivity to the changes in the mobile porosity due to bioclogging were reviewed, and the micro-colony relation of Thullner et al. [Thullner, M., Zeyer, J., Kinzelbach, W., 2002. Influence of microbial growth on hydraulic properties of pore networks, Transport in Porous Media, 49, 99-122.] was found to best describe the relation between the bulk hydraulic parameters.     

Multiphase flow and transport caused by spontaneous gas phase growth in the presence of dense non-aqueous phase liquid

Disconnected bubbles or ganglia of trapped gas may occur below the top of the capillary fringe through a number of mechanisms. In the presence of dense non-aqueous phase liquid (DNAPL), the disconnected gas phase experiences mass transfer of dissolved gases, including volatile components from the DNAPL. The properties of the gas phase interface can also change. This work shows for the first time that when seed gas bubbles exist spontaneous gas phase growth can be expected to occur and can significantly affect water-gas-DNAPL distributions, fluid flow, and mass transfer. Source zone behaviour was observed in three different experiments performed in a 2-dimensional flow cell. In each case, a DNAPL pool was created in a zone of larger glass beads over smaller glass beads, which served as a capillary barrier. In one experiment effluent water samples were analyzed to determine the vertical concentration profile of the plume above the pool. The experiments effectively demonstrated a) a cycle of spontaneous gas phase expansion and vertical advective mobilization of gas bubbles and ganglia above the DNAPL source zone, b) DNAPL redistribution caused by gas phase growth and mobilization, and c) that these processes can significantly affect mass transport from a NAPL source zone.