PRECIPITATION CATCH MEASURED BY TUE WYOMING SHIELD AND TUE DUAL-GAGE SYSTEM1

ABSTRACT: The Wyoming shield and dual-gage measuring systems were developed to measure all precipitation, but more specifically snowfall under windy conditions. Results of a study at five sites on the Reynolds Creek Experimental Watershed in southwest Idaho indicate that gages with Wyoming shields and the dual-gage system measured the same amount when air temperatures were higher than ?2.2°C. Precipitation amounts computed from the dual. gage system were slightly more than from gages with Wyoming shields for snowfall, especially under windy conditions. Results also show how well the Alter shielded and unshielded gages used in the dual-gage system represent the computed catch if data were only available from one or the other of the gages.     

Morphologie effects of channelization: the case of the Neebing-McIntyre floodway,Thunder Bay,Ontario, Canada

The Neebing-McIntyre floodway in Thunder Bay, Ontario, Canada, has been constructed with a relatively straight and uniform trapezoidal channel, compared with the prechannelized sinuous reaches of the Neebing and the McIntyre rivers. The flow regime of the floodway also contrasts significantly with the prechannelized regime, because of the combination of discharges from these rivers into a new channel and the regulation of flows by a diversion structure. The maximum channel capacity of the floodway is about 284 m³ s^–1 (175-year regional flood), compared with about 40 m³ s^–1 and 60 m³ s^–1, respectively, for the Neebing and the McIntyre. According to regime theories, the construction of a straight and trapezoidal channel has upset the equilibrium of the stream system and therefore should lead to some accelerated erosion and sedimentation processes in the new channel immediately after construction. Erosion potential is particularly high during higher discharge events, when flow velocities are expected to be greater than the prechannelized velocities of the Neebing and the McIntyre. The overall sediment yield of the watershed is low (71t km^–2 yr^–1), compared with other documented watersheds of North America, but the rates of deposition in the floodway are relatively high, mainly due to the backwater effect of Lake Superior. Unless maintained by constant channel work, the floodway will tend to fill up with sediment, until a postconstructional equilibrium is reestablished.     

Watershed factors affecting stream acidification in the White Mountains of New Hampshire,USA

The streams tributary to acidic Cone Pond, pH 4.5–4.8, and circumneutral Black Pond, pH 5.3–6.4, in the White Mountains of New Hampshire, USA, were monitored for a year. The watersheds of these two ponds were characterized in terms of geology and stream hydrology. Chemical gradients and patterns in rock weathering and groundwater discharge explain many of the differences in mineral content and acidity of the streams. The rocks of Black watershed produced an average of ten times the equivalent of basic cations as rocks from Cone watershed. This is on the same order as the difference in acidity of the two streams. Down-stream changes in stream chemistry follow differing patterns, but reflect the same principle of residence time and water path length controlling chemical evolution of streamwater. Watershed and aquatic managers may use these parameters in an inexpensive and simple assessment of the susceptibility of individual streams and ponds to acidification. A method is recommended to determine quickly the potential influence of bedrock type to aquatic chemistry.     

Evaluating the effectiveness of air quality management within the class I area of great smoky mountains national park

The Clean Air Act Amendments of 1977 designated national parks and wilderness areas larger than 1894 ha to be class I areas for air quality management, setting more restrictive criteria than the National Ambient Air Quality Standards. Class I areas are afforded the greatest degree of air quality protection under the Clear Air Act of 1970. In recent years, several studies have documented air pollution effects in the Great Smoky Mountains National Park (GSMNP), the second-largest class I area in the eastern United States. Air pollution problems of greatest concern in the GSMNP are effects of acid deposition, visibility impairment, and tropospheric ozone. Several recent events have increased concerns about air quality management in the class I area of the GSMNP. A forum, sponsored by the Southern Appalachian Man and the Biosphere Cooperative (SAMAB), was held in March 1992, which involved representative. parties-at-interest and began to address strategies for better management of air resources in the Southern Appalachians. This paper summarizes those discussions and recommendations and reports actions occurring as a result of the forum. Another objective of this paper is to present a conceptual framework for more effective management of the class I area of the GSMNP.     

An approach for analysing the potential for material efficiency improvement

Material efficiency improvement saves energy and reduces the consumption of primary resources and reduces the volume of waste. In this article an approach for analysing the potential for material efficiency improvement is proposed and discussed. In this approach the product functions performed by the materials and various improvement measures are taken into account. The potential for material saving and associated energy saving is assessed and evaluated economically. In this paper the approach is tested in an analysis of the potential for material efficiency improvement with respect to plastic packaging in the Netherlands. The technical reduction potential is found to be 34 ± 7% (157 ± 30 ktonne virgin plastics). Realization of this potential would improve the energy efficiency of the lifecycle of plastic packaging by 31% (10 PJ in 1988). From our study we conclude that our approach can indeed be used to investigate the potential for material efficiency improvement. However, a reliable technical and particularly an economical assessment of reduction measures cannot be made until more detailed data become available.     

Determination of optimum minimum flow from a dam by using energy analysis

The proposed restoration of an abandoned hydroelectric dam on the Quinebaug River, Connecticut, is studied using energy analysis. The analysis considers the effects of alternative minimum flow releases, ranging from 0 to 34 cubic meters per second (cms), on the total energy flow of the affected system. The principal system components affected by differing minimum flows are hydroelectric power generation, aquatic habitat, and gross aquatic ecosystem productivity.The minimum flow alternative resulting in the highest annual energy flow in the affected system is considered optimal. From this purely analytical point of view, the optimum minimum flow is 0 cms, due to the short length and low productivity of the regulated reach, and the lack of floodplain interactions.Simulations of longer and more productive river reaches were conducted. For very short, unproductive reaches, in the absence of a floodplain, the contribution of aquatic community productivity to total system energy flow is negligible compared to hydroelectric generation. Optimum minimum flows are higher for longer and more productive reaches. For such cases the operation of hydroelectric dams could reduce total system energy flow because the energy supplied by hydroelectric generation may be offset by losses in aquatic productivity due to diminished riverine habitat.     

Advancement of renewables in Bangladesh and Thailand: Policy intervention and institutional settings

This article reviews and analyses the advancement of renewable sources of energy in Bangladesh and Thailand in terms of policy intervention and institutional settings. Since renewable forms of energy emit far smaller amounts of greenhouse gas compared with fossil fuels, their use should mitigate climate change impacts while contributing to the provision of energy services. The article turns first to a review of energy–environment trends and the potential for renewables in these two nations. It then discusses strategies for the advancement of renewables. It is argued that further significant efforts can be made towards the advancement of renewables in Bangladesh and Thailand. These two nations could also learn from the experience in industrialized nations and other developing nations with regard to requisite policy instruments and processes. A number of barriers remain to the advancement of renewables, especially in terms of policy arrangements, institutional settings, financing mechanisms and technologies. Resources, cooperation and learning are required in order to overcome such barriers and to foster the development of necessary policy measures. Implementation of the clean development mechanism (CDM) under the Kyoto Protocol, and replication and adaptation of effective strategies from other settings are possible avenues for this.     

Energy and carbon balances of wood cascade chains

In this study we analyze the energy and carbon balances of various cascade chains for recovered wood lumber. Post-recovery options include reuse as lumber, reprocessing as particleboard, pulping to form paper products, and burning for energy recovery. We compare energy and carbon balances of chains of cascaded products to the balances of products obtained from virgin wood fiber or from non-wood material. We describe and quantify several mechanisms through which cascading can affect the energy and carbon balances: direct cascade effects due to different properties and logistics of virgin and recovered materials, substitution effects due to the reduced demand for non-wood materials when wood is cascaded, and land use effects due to alternative possible land uses when less timber harvest is needed because of wood cascading. In some analyses we assume the forest is a limiting resource, and in others we include a fixed amount of forest land from which biomass can be harvested for use as material or biofuel. Energy and carbon balances take into account manufacturing processes, recovery and transportation energy, material recovery losses, and forest processes. We find that land use effects have the greatest impact on energy and carbon balances, followed by substitution effects, while direct cascade effects are relatively minor.