Loofa egyptiaca as a novel adsorbent for removal of direct blue dye from aqueous solution

In this paper, Loofa egyptiaca (LE), an agricultural plant cultivated in Egypt, was used to prepare low-cost activated carbon (LE_C1 and LE_C2) adsorbents. The adsorbents (LE, LE_C1 and LE_C2) were evaluated for their ability to remove direct blue 106 dye from aqueous solutions. Batch mode experiments were conducted using various parameters such as pH, contact time, dye concentration and adsorbent concentration. The surface chemistry of LE, LE_C1 and LE_C2 was analyzed by scanning electron microscopy (SEM). The experimental data were examined using Langmuir, Freundlich, Temkin and Harkins–Jura isotherms. The results showed that the adsorption of direct blue 106 was maximal at the lowest value of pH (pH = 2). Removal efficiency was increased with an increase in dye concentration and a decrease in amount of adsorbent. Maximum adsorption capacity was found to be 57.14, 63.3 and 73.53 mg/g for LE, LE_C1 and LE_C2 respectively. Kinetics were also investigated using pseudo-first-order, pseudo-second-order and intra-particle diffusion models. The experimental data fitted very well with the pseudo-first-order and pseudo-second-order kinetic models. The results indicate that LE, LE_C1 and LE_C2 could be employed as adsorbents for the removal of direct blue dye from aqueous solutions.     

Removal of arsenic from wastewater using iron compound: Comparing two different types of adsorbents in the context of LCA

A study was carried out in order to compare the environmental performance of two different types of adsorbents in removing arsenic (As) from wastewater. A FeCl₃-based adsorbent and a poly-Fe-based adsorbent were first synthesized and their abilities in adsorbing As from wastewater were investigated in terms of the adsorption density and the rate of adsorption. Here, it should be noted that the main material being used in the synthesis of the poly-Fe-based adsorbent was a waste product, known as polyferric sulfate or poly-Fe in short, which exits the manufacturing process of titanium dioxide.Both adsorbents were then compared in the context of life-cycle assessment (LCA). In other words, the experimental results (i.e. the value of the adsorption density and the rate of adsorption) were input into the LCA model in order to assess the environmental performance of each adsorbent in removing arsenic. An estimate for the environmental burden of each option was finally calculated as the sum of the depletion of abiotic resources (ADP), the global warming potential (GWP), the acidification potential (AP), the photo-oxidant formation potential (POCP), the eutrophication potential (EP), and the human toxicity potential (HTP). The main finding of this study was that the adsorption of arsenic by using the poly-Fe-based adsorbent is more attractive treatment option in the environmental protection point of view than the adsorption by using the FeCl₃-based adsorbent, which generates a relatively larger environmental burden.     

环境规制对技术效率和生产力损失的影响分析

以中国工业为研究对象,以经济发展程度不同所分的东部、中部和西部地区兰个地区作为研究区域,采用非参数数据包络法(DEA)中的径自效率测量方法(radial efficiency measure)为主要研究方法,分析了在1998-2005年期间环境规制对中国工业的技术效率和生产力损失的影响.研究结果表明,在指定的研究期间,环境规制使得中国工业技术效率提高,但是对于生产力的发展却产生了负面的影响.三个地区之间受环境规制影响的差异较大,其中东部为环境规制所付出的成本最大,即东部为环境污染所付出的环境成本最高,这也是为何从九十年代开始,污染物从东部往中西部转移的原因;从受污染物影响的角度来看,因控制废水而引起的生产力损失大于因控制SO2而引起的生产力损失,即对于中国工业,废水的环境成本大于SO2的环境成本.另外,从研究结果中也可知,在中国现有的生产方式下,实施严格的环境规制有一定难度,所以改变旧的生产方式,实施可持续发展的生产方式是当务之急.     

Technological Progress, Structural Change and China＇s Energy Efficiency

China has witnessed rapid economic development since 1978, and during the time, energy production and consumption developed at a tremendous speed as well. Energy efficiency which can be measured by energy consumption per unit of GDP, however, experienced continuous decrease. Theoretically, the change of energy efficiency can be attributed to industry structural change and technological change. In order to explain the transformation of Chinese energy efficiency, we adopt logarithmic mean Divisia index techniques to decompose changes in energy intensity in the period of 1994-2005. We find that technological change is the dominant contributor in the decline of energy intensity, but the contribution has declined since 2001. The change in industry structure has decreased the energy intensity before 1998, but raised the intensity after 1998. Decomposed technological effects for all sectors indicate that technological progresses in high energy consuming industries such as raw chemical materials and chemical products, smelting and pressing of ferrous metals, manufacture of non-metallic mineral products and household contribute are the principal drivers of China＇s declining energy intensity.     

Sorption of alpha and beta hydrophobic endosulfan in a Vertisol from southeast region of Turkey

Endosulfan has been applied to control numerous insects in a variety of food and non-food crops. Limited information is available on dynamics of this pesticide in the soil. The objective of this research was to determine the adsorption–desorption behavior of the alpha (α) and beta (β) endosulfan in a Vertisol from the southeast region of Turkey, where cotton is the main crop in the large irrigated lowlands. The α and β endosulfan were adsorbed considerably and Freundlich adsorption–desorption isotherms fitted the α and β endosulfan data (R² > 0.98). Freundlich adsorption coefficients (K_f) for the α endosulfan ranged between 21.63 and 16.33 while for the β endosulfan they were between 14.01 and 17.98 for the Ap and Bw2 horizons. The difference of K_f values of α and β endosulfan for two horizons were explained with the slight difference in the amount of organic matter and clay, but considerable difference in Fe contents of the two horizons. Alpha and β endosulfan K_fd values were 118.03 and 45.81 for the Ap and 48.08 and 68.71 for the Bw2 horizons. Higher adsorption and desorption behavior of the endosulfan isomers for the same horizon was attributed to poor physical bonding between the endosulfan molecule and the surfaces of fundamental soil particles. This fact is thought to increase the effective use of endosulfan in agriculture with a possibility of its movement to the surface and groundwater in the Vertisol studied.     

XZKP型高效空塔喷淋烟气脱硫装置技术特点

介绍了XZKP型高效空塔喷淋烟气脱硫装置的技术原理、技术特点、中试及工业化试验的情况。该技术通过改进工艺和结构,在提高脱硫效率和脱硫剂循环利用率两项技术上成效显著,用户可在不增加装置投资的前提下,获得更高的效率和更低的运行成本。     

A statistical analysis of the carbon dioxide capture process

Post combustion carbon dioxide (CO₂) capture is one of the most commonly adopted technologies for reducing industrial CO₂ emissions, which is now an important goal given the widespread concern over global warming. Research on amine-based CO₂ capture has mainly focused on improving effectiveness and efficiency of the CO₂ capture process. Our research work focuses on studying the relationships among the significant parameters influencing CO₂ production because an enhanced understanding of the intricate relationships among the parameters involved in the process is critical for improving efficiency of the CO₂ capture process. This paper presents a statistical study that explores the relationships among parameters involved in the amine-based post combustion CO₂ capture process at the International Centre for CO₂ Capture (ITC) located in Regina, Saskatchewan of Canada. A multiple regression technique has been applied for analysis of data collected at the CO₂ capture pilot plant at ITC. The parameters have been carefully selected to avoid issues of multicollinearity, and four mathematical models among the key parameters identified have been developed. The models have been tested, and accuracy of the models is found to be satisfactory. The models developed in this study describe part of the CO₂ capture process and can help to predict performance of the CO₂ capture process at ITC under different conditions. Some results from a preliminary validation process will also be presented.     

影响脱硫系统运行经济性的因素及改进措施

分析了原烟气成分、脱硫剂石灰石等对脱硫系统运行经济性的影响,探讨循环泵组合投运和工艺参数控制对运行经济性的影响规律,提出改进湿法脱硫系统运行经济性的措施,为脱硫装置的节能、经济运行提供参考。     

基于微观仿真的同站台换乘站客流疏散研究

旨在对同站台换乘站的客流行为和规律,以及对车站乘客疏散时的情况进行分析和研究。通过建立同站台换乘站的微观疏散仿真模型,利用微观仿真软件VISSIM对某即将建成使用的同站台换乘站的仿真模拟,直观地对客流的疏散过程和疏散人群分布状况进行动态观察,通过改变模型的参数设置,考察不同情况下换乘站的换乘效率,得出提高换乘效率的措施和建议,并最终为换乘站的设施设计和运营管理提供辅助设计与决策支持。     

吉林省城市紧凑度与城市效率的时空演变及相关性

紧凑城市理念被认为可以有效提高城市经济发展效率,减少城市在开发建设、资源配置等方面的低效率。为探究我国城市紧凑度和城市效率的时空演变及两者间的相关性,本研究以吉林省地级及以上城市为研究对象,研究时间段选择为2000—2013年。研究主要分为三个部分。第一部分,运用熵值法,对吉林省地级及以上城市的紧凑度时空演变特征进行研究,研究发现,吉林省城市紧凑度平均水平较低,并且空间分布极不均衡,受区位和经济发展水平影响较大,高紧凑度城市基本位于哈大城市走廊一线。第二部分运用DEA数据包络模型,对吉林省城市效率演变特征进行研究,结果显示,吉林省城市效率在经过了长期的反复波动后于2012年步入快速增长阶段,受多种因素影响,各城市全要素生产率增长节奏迥异,但都表现出与技术进步一致的变动性,城市经济发展对新技术、新的生产要素投入的依赖较大,资源利用效率整体较低。第三部分运用R语言对吉林省城市紧凑度与城市效率的相关性进行了研究,两者间存在极弱的相关性,接着借助象限图法得出两者在不同时间段内存在一定程度的同步性,紧凑度提升时大部分城市的城市效率会出现提升,紧凑度的下降不一定有效引起城市效率同步下降。