Effect of template in MCM-41 on the adsorption of aniline from aqueous solution

The effect of the surfactant template cetyltrimethylammonium bromide (CTAB) in MCM-41 on the adsorption of aniline was investigated. Various MCM-41 samples were prepared by controlling template removal using an extraction method. The samples were then used as adsorbents for the removal of aniline from aqueous solution. The results showed that the MCM-41 samples with the template partially removed (denoted as C-MCM-41) exhibited better adsorption performance than MCM-41 with the template completely removed (denoted as MCM-41). The reason for this difference may be that the C-MCM-41 samples had stronger hydrophobic properties and selectivity for aniline because of the presence of the template. The porosity and cationic sites generated by the template play an important role in the adsorption process. The optimal adsorbent with moderate template was achieved by changing the ratio of extractant; it has the potential for promising applications in the field of water pollution control.     

Adsorptive removal of Cd(II) and Pb(II) ions from aqueous solutions by using Turkish illitic clay

The ability of Turkish illitic clay (TIC) in removal of Cd(II) and Pb(II) ions from aqueous solutions has been examined in a batch adsorption process with respect to several experimental conditions including initial solution pH, contact time, initial metal ions concentration, temperature, ionic strength, and TIC concentration, etc. The characterization of TIC was performed by using FTIR, XRD and XRF techniques. The maximum uptake of Cd(II) (11.25 mg g⁻¹) and Pb(II) (238.98 mg g⁻¹) was observed when used 1.0 g L⁻¹ of TIC suspension, 50 mg L⁻¹ of initial Cd(II) and 250 mg L⁻¹ of initial Pb(II) concentration at initial pH 4.0 and contact time of 240 min at room temperature. The experimental data were analyzed by the Langmuir, Freundlich, Temkin and Dubinin Radushkevich (D-R) isotherm models. The monolayer adsorption capacity of TIC was found to be 13.09 mg g⁻¹ and 53.76 mg g⁻¹ for Cd(II) and Pb(II) ions, respectively. The kinetics of the adsorption was tested using pseudo-first-order, pseudo-second-order, Elovich and intraparticle diffusion models. The results showed that the adsorption of Cd(II) and Pb(II) ions onto TIC proceeds according to the pseudo-second-order model. Thermodynamic parameters including the Gibbs free energy (ΔG), enthalpy (ΔH), and entropy (ΔS) changes indicated that the present adsorption process was feasible, spontaneous and endothermic in the temperature range of 5–40 °C.     

SO2 gas adsorption by modified kaolin clays: influence of previous heating and time acid treatments

Modified kaolin clays were used as adsorbents for SO(2) gas adsorptions. The clays were heated up to 900 °C previous to acid treatments with 0.5 N sulfuric acid solutions at boiling temperature during different times up to 1440 min. Equilibrium adsorption at 25 °C and 0.1 MPa was carried out by using a volumetric apparatus. The samples were characterized by chemical analysis, X-ray diffraction and infrared analysis. The heating of the clays followed by acid treatment improved the adsorption capacity of the kaolin clays. The presence of amorphous silica and hydroxyl in the final products improved SO(2) adsorption capacity. Better properties for SO(2) adsorption were found in kaolin rich in not well ordered kaolinite clay mineral.     

An Assessment of U(VI) removal from groundwater using biochar produced from hydrothermal carbonization

The ever-increasing growth of biorefineries is expected to produce huge amounts of lignocellulosic biochar as a byproduct. The hydrothermal carbonization (HTC) process to produce biochar from lignocellulosic biomass is getting more attention due to its inherent advantage of using wet biomass. In the present study, biochar was produced from switchgrass at 300 °C in subcritical water and characterized using X-ray diffraction, fourier transform infra-red spectroscopy, scanning electron micrcoscopy, and thermogravimetric analysis. The physiochemical properties indicated that biochar could serve as an excellent adsorbent to remove uranium from groundwater. A batch adsorption experiment at the natural pH (~3.9) of biochar indicated an H-type isotherm. The adsorption data was fitted using a Langmuir isotherm model and the sorption capacity was estimated to be ca. 2.12 mg of U g(-1) of biochar. The adsorption process was highly dependent on the pH of the system. An increase towards circumneutral pH resulted in the maximum adsorption of ca. 4 mg U g(-1) of biochar. The adsorption mechanism of U(VI) onto biochar was strongly related to its pH-dependent aqueous speciation. The results of the column study indicate that biochar could be used as an effective adsorbent for U(VI), as a reactive barrier medium. Overall, the biochar produced via HTC is environmentally benign, carbon neutral, and efficient in removing U(VI) from groundwater.     

Preparation of novel activated carbons from H2SO4-pretreated corncob hulls with KOH activation for quick adsorption of dye and 4-chlorophenol

Corncob hull was immersed in 25 wt% H(2)SO(4) and was carbonized in an oven at 290 °C for 2h to obtain the char. The char was then activated for 1h at 780 °C by KOH at weight ratio of KOH/char of 2.5, 3.0, and 3.5. SEM photos of the carbons revealed that the cell wall of corncob hull was etched into thin film structure. It was shown that the adsorption isotherms of methylene blue and 4-chlorophenol on the carbons were well fitted by the Langmuir equation. Moreover, the adsorption kinetics could be satisfactorily described by the Elovich equation. The normalized standard deviations are less than 2.8%. The high fraction of adsorption amount adsorbed within 1 min to that at saturation demonstrated the advantage of the prepared activated carbons. The fraction of adsorption amount within 1 min to that at saturation (q(1)/q(mon)) for the adsorption of 4-CP is high up to 0.807. Such quick adsorption behavior was mainly attributed to the presence of the thin film structure of carbons.     

Prediction of metal-adsorption behaviour in the remediation of water contamination using indigenous microorganisms

In recent years, the adsorption of heavy metal cations onto bacterial surfaces has been studied extensively. This paper reports the findings of a study conducted on the heavy metal ions found in mine effluents from a mining plant where Co²⁺ and Ni²⁺ bearing minerals are processed. Heavy metal ions are reported to be occasionally present in these mine effluents, and the proposed microbial sorption technique offers an acceptable solution for the removal of these heavy metals. The sorption affinity of microorganisms for metal ions can be used to select a suitable microbial sorbent for any particular bioremediation process. Interactions of heavy metal ions (Co²⁺ and Ni²⁺) and light metal ions (Mg²⁺ and Ca²⁺) with indigenous microbial cells (Brevundimonas spp., Bacillaceae bacteria and Pseudomonas aeruginosa) were investigated using the Langmuir adsorption isotherm, pseudo second-order reaction kinetics model and a binary-metal system. Equilibrium constants and adsorption capacities derived from these models allowed delineation of the effect of binding affinity and metal concentration ratios on the overall adsorption behaviour of microbial sorbents, as well as prediction of performance in bioremediation systems. Although microbial sorbents used in this study preferentially bind to heavy metal ions, it was observed that higher concentrations (>90 mg/?) of light metal ions in multi-metal solutions inhibit the adsorption of heavy metal ions to the bacterial cell wall. However, the microbial sorbents reduced Ni²⁺ levels in the mine-water used (93–100% Ni²⁺ removal) to below the maximum acceptable limit of 350 μg/?, established by the South African Bureau of Standards. Competition among metal ions for binding sites on the biomaterial surface can occur during the bioremediation process, but microbial sorption affinity for heavy metal ions can enhance their remediation in dilute (<5 mg/? heavy metal) wastewaters.     

Adsorption and degradation of triazophos, chlorpyrifos and their main hydrolytic metabolites in paddy soil from Chaohu Lake, China

Triazophos and chlorpyrifos are organophosphorus pesticides (OPs), and their primary hydrolytic metabolites are 1-phenyl-3-hydroxy-1,2,4-triazole (BZC) and 3,5,6-trichloro-2-pyridinol (TCP). In this study, the adsorption and degradation of triazophos, chlorpyrifos, BZC and TCP were investigated in paddy soil from Chaohu Lake, China. Adsorption tests demonstrated that the adsorption of these compounds to soils could be described by the Freundlich equation. Moreover, chlorpyrifos displayed the highest affinity for adsorption, followed by triazophos, BZC and TCP. Degradation of these compounds in non-sterile soil followed first-order exponential decay kinetics, and the half-life (t(1/2)) of these contaminants ranged from 8.40 to 44.34 d. Sterilization of soil decreased the degradation rate, indicating that microorganisms played a significant role in the degradation of these compounds. The values of t(1/2) and K(oc) were fitted to obtain models that could predict the leaching potential of the contaminants from soil. Compared to their parent compounds, BZC and TCP showed high potential for leaching into groundwater. The inoculation of OPs-degrading bacterium (Diaphorobacter sp. GS-1) removed 95.38%, 100% and 100% of triazophos, chlorpyrifos and BZC in paddy soil after 21 d, respectively. The pollution risk of triazophos, chlorpyrifos and BZC could be greatly decreased by inoculating soil with Diaphorobacter sp. GS-1, which decreases the t(1/2) of the contaminants.     

基于模糊层次分析法的某超高层建筑疏散效率分析

超高层建筑人员疏散效率直接影响建筑安全水平。基于模糊层次分析法(FAHP),构建了评价超高层建筑疏散效率的指标体系,分析了各因素对疏散效率的影响。结果表明疏散宽度和人员数量对疏散效率影响较大。通过人员疏散软件对评估结果进行了验证。疏散效率结果与人员疏散模拟软件的计算结果基本吻合,能较准确地预测各因素变化所带来的影响,但对于人员数量较少时疏散宽度发生变化的情况尚不能完全适用。     

注汽锅炉烟气余热利用技术应用

通过对注汽锅炉烟气余热利用潜力分析和开展余热利用方式对比分析,采用了在对流段安装热管换热器,通过换热器将烟气余热与助燃空气换热,余热利用技术的现场应用,实现了注汽锅炉燃料单耗降低的目的,取得良好的节能效果。     

辽宁沿海经济带港口竞争力和效率评价——基于主成分分析和数据包络分析

通过建立合理的指标体系,使用主成分分析法评价辽宁沿海经济带港口整体竞争力,发现统计期间内其竞争力不断增强,交通配套设施在此期间始终停滞不前甚至下降,是整体竞争力提升的一个消极因素.将计算结果代入DEA方法评价其效率,发现辽宁沿海经济带港口管理较好,在2004年之后效率始终保持较高水平,仍然有继续提升的空间.