光合细菌对2,4,6-三氯苯酚的降解特性研究

研究了混合光合细菌PSB-DR在不同光照、接种量和pH值下对2,4,6-三氯苯酚(2,4,6-TCP)的生物降解特性,确定了PSB-DR生物降解2,4,6-TCP的优化控制条件.结果表明,光照培养下,接种量30%,初始pH值7.0时2,4,6-TCP降解效率最高.在此条件下,50mg/L的2,4,6-TCP经5d后降解率达到82.3%.培养基中醋酸钠的加入对2,4,6-TCP降解有明显的抑制作用.PSB-DR静息细胞对2,4,6-TCP的降解符合高浓度底物抑制的酶促反应类型,其降解动力学参数rmax=1.746h-1,Km=38.333mg/L,Ki=260.87mg/L.     

Removal of selenite using ‘waste’ Fe(III)/Cr(III) hydroxide: Adsorption kinetics and isotherms

Removal of selenite [Se (IV)] from aqueous solution on to industrial solid ‘waste’ Fe(III)/Cr(III) hydroxide as adsorbent was investigated in the present article. Maximum adsorption was found to be at pH 4.0. Pretreated Fe(III)/Cr(III) hydroxide was found to be more efficient for the removal of selenite compared to untreated adsorbent. Langmuir and Freundlich isotherms have been studied. The Langmuir adsorption capacity (Q ₀) of the pretreated and untreated adsorbents was found to be 15.63 and 6.04?mg?g^?1, respectively. The adsorption process fit into the second-order kinetics. Thermodynamic parameters show that the adsorption process is spontaneous and endothermic in the temperature range 32 to 60°C. Coexisting anions vanadate and phosphate significantly affect the adsorption of selenite for both the pretreated and untreated adsorbents. Molybdate, thiocyanate, sulphate, nitrate and chloride do not significantly affect the removal of selenite for pretreated adsorbent.     

Removal of Mo(VI) from aqueous solutions using sulfuric acid-modified cinder: kinetic and thermodynamic studies

Removal of Mo(VI) from aqueous solutions was investigated using cinder modified by sulfuric acid. Various parameters such as pH, agitation time, Mo(VI) concentration, and temperature have been studied. The maximum adsorption of Mo(VI) occurred at pH between 4.0 and 6.0. Kinetic studies showed that the adsorption generally obeyed a pseudo second-order model. The activation energy was 31.4?kJ?mol^?1, indicating that the adsorption process was governed mainly by interactions of physical nature. Furthermore, application of Langmuir and Freundlich isotherm models to the adsorption equilibrium data showed that the adsorption behavior obeyed the Langmuir model. The adsorption capacity was found to be 10.8?g Mo(VI)?kg^?1 adsorbent. Finally, thermodynamic parameters such as ΔH ⁰, ΔS ⁰, and ΔG ⁰ were also evaluated, which showed that the adsorption of Mo(VI) on the treated cinder was endothermic, entropy increasing, and spontaneous. In conclusion, the sulfuric acid-modified cinder was shown to be an inexpensive, effective, and simple adsorbent for the removal of Mo(VI) from water.     

1,3,5-triazine-triethylenetetramine polymer: an efficient adsorbent for removal of Cr(VI) ions from aqueous solution

The synthesis of 1,3,5-triazine-triethylenetetramine (TATETA), its characterization by infrared spectroscopy and elemental analysis, and its application for removal of Cr(VI) ions from aqueous solution is reported. The effects of pH, contact time, initial concentration of Cr(VI), sorbent dose, and temperature on adsorption were investigated and optimized by batch adsorption experiments. Adsorption was highest at acidic conditions with an equilibration time of 25 min. The adsorption followed a Langmuir model, with an adsorption capacity of 303 mg g^?1, was second order in its kinetics, and exothermic and thus spontaneous.     

污泥基活性炭去除水中重金属离子效能与动力学研究

以城市污泥为主要原料制备了污泥基活性炭(SAC),考察了其对重金属离子的吸附去除效能和吸附动力学规律.并选择了2种商品活性炭(煤质炭,MAC和椰壳炭,YAC)作为对比,以初始浓度为50mg/L的Cu(II),Pb(II),Cd(II),Cr(VI)4种重金属离子为去除对象,分别进行了3种活性炭的表面理化性质分析及其对4种重金属离子的吸附试验.结果表明,SAC的比表面积和微孔容积仅为YAC和MAC的1/3~1/2,吸附速率也相对较慢,但其对Cu(II),Pb(II),Cr(VI),Cd(II)的平衡吸附量却远大于2种商品活性炭,分别为9.9,8.9,8.2,5.4mg/g,说明SAC表面的高酸性基团含量对重金属离子的吸附起到了关键作用;Langmuir与Freundlich吸附等温模型均能较好地拟合SAC对Cu(II)和Pb(II)的吸附,SAC对Cr(VI)的吸附过程更符合Langmuir模型,而SAC对于Cd(II)的吸附过程用Langmuir与Freundlich两个模型均不能较好地拟合,说明SAC表面缺少能够与Cd(II)发生反应的结合位点.     

番龙眼木的热分解失重及动力学研究

木材热解是木材类火灾事件的先导过程,是引起后续的阴燃、着火、燃烧和火焰蔓延等各种现象的重要因素,因此研究木材的热解非常重要。采用热重分析法对番龙眼木的热重特性及反应动力学进行研究。在空气气氛下,研究样品粒径、试验气氛和升温速率对番龙眼木热解特性的影响。对番龙眼木的热解反应过程的分析,采用Flynn-Wall-Ozawa积分法、Kissinger最大速率法和atava-esták积分法对动力学进行处理。试验得到了一些热解动力学的参数,并推断出不同温升速率下番龙眼木的动力学最概然机理方程为反应级数函数,n=4     

Heavy metals uptake from aqueous solutions using marine algae (Colpomenia sinuosa): kinetics and isotherms

The adsorption of copper, zinc, cobalt, lead and cadmium ions onto Colpomenia sinuosa was studied as a function of contact time, initial metal ion concentration and initial pH. In addition, desorption studies were performed. Characterisation of this adsorbent was also confirmed by Fourier transform infrared (FTIR) spectroscopy and scanning electron microscopy (SEM) analysis. Batch adsorption experimental data were analysed using Langmuir, Freundlich and Dubinin–Raduschkevich (D–R) adsorption isotherms. The results indicated that the biosorption equilibrium was well described by both the Freudlich and D–R isotherms. Moreover, sorption kinetics was performed and it was observed that equilibrium was reached in<60 min, which could be described by the pseudo-second-order kinetic model for all heavy metals. The sorption of heavy metals onto the biomass was largely dependent on the initial solution pH. The elution efficiency for heavy metal ions desorption from C. sinuosa was determined for 0.1 M HCl, 1.0 M HCl and 1.0 M HNO₃. Desorption efficiency and also adsorption capacity were highest for Pb(II). The results indicate that C. sinuosa has great potential for the removal of heavy metals in an ecofriendly process.     

Removal of sulfadiazine from aqueous solution on kaolinite

The adsorption of sulfadiazine onto kaolinite clay as an alternative adsorbent was examined in aqueous solution, hnpacts of the contact time, pH, temperature, ionic strength and coexistent surfactants on the adsorption process were evaluated. The pH significantly influenced the adsorption process, with adsorption being promoted at lower pH due to the cation exchange mechanism. Decreasing ionic strength in the solution was favorable for adsorption, and the addition of cationic and anionic surfactants had negative effects on the adsorption capacity of sulfadiazine on kaolinite. Kinetic experiments showed that the adsorption followed the pseudo-second-order model. The equilibrium adsorption was well described by both Freundlich and Dubinin-Radushkevich （DR） models. According to the DR model, the adsorption mechanism was determined by cationic exchange and weak physical forces. The thermodynamic study showed that sulfadiazine adsorption onto kaolinite was a sponta- neous and endothermic reaction.     

239Pu在西南某地板岩与土壤中的吸附行为

以西南某极低放废物处置库预选场址地质环境中板岩与土壤为吸附介质,通过吸附实验和解吸实验,研究了不同介质粒径、环境温度(10℃—50℃)、水相pH(4—12)对239Pu核素在板岩与土壤介质中吸附行为的影响特征.吸附实验表明,水相环境中板岩和土壤介质对239Pu核素的吸附过程在10 d左右达到平衡,并且其吸附分配比随着介质粒径的减小而增大,随着水相pH值的增大而增大,但温度对其吸附的影响不明显.解吸实验表明板岩和土壤介质对239Pu核素的吸附是可逆的.     

农药含钾废渣的热解动力学

通过XRF和XRD两种测试方法对农药含钾废渣的成分进行测定,结果显示,该废渣中含有大量的氯化钾,具有很大的资源化价值.采用热重分析法,在5、10、15、20 K.min-1线性升温速率下,研究了农药含钾废渣在空气气氛下的热解特性及热解动力学.以期为农药含钾废渣的资源化处理提供理论依据.结果表明,该废渣热解过程分为3个阶段,失重率分别为4.62%、7.69%和2.55%;且3个阶段的活化能E分别为83.53、128.48和138.17 kJ.mol-1,指前因子A分别为4.79×107、2.34×1010和6.46×107s-1.