Influence of extracellular polymeric substances from activated sludge on the aggregation kinetics of silver and silver sulfide nanoparticles

• The NPs aggregation in the electrolyte solution is consistent with the DLVO theory. • In NaNO₃ and low Ca(NO₃)₂, EPS alleviates the NPs aggregation by steric repulsion. • In high Ca(NO₃)₂, EPS accelerates the NPs aggregation by exopolysaccharide bridging. • Ag₂S NPs have stronger stability compared with Cit-Ag NPs in aqueous systems. Extracellular polymeric substances (EPS) in activated sludge from wastewater treatment plants (WWTPs) could affect interactions between nanoparticles and alter their migration behavior. The influence mechanisms of silver nanoparticles (Ag NPs) and silver sulfide nanoparticles (Ag₂S NPs) aggregated by active EPS sludge were studied in monovalent or divalent cation solutions. The aggregation behaviors of the NPs without EPS followed the Derjaguin-Landau-Verwey-Overbeek (DLVO) theory. The counterions aggravated the aggregation of both NPs, and the divalent cation had a strong neutralizing effect due to the decrease in electrostatic repulsive force. Through extended DLVO (EDLVO) model analysis, in NaNO₃ and low-concentration Ca(NO₃)₂ (<10 mmol/L) solutions, EPS could alleviate the aggregation behaviors of Cit-Ag NPs and Ag₂S NPs due to the enhancement of steric repulsive forces. At high concentrations of Ca(NO₃)₂ (10‒100 mmol/L), exopolysaccharide macromolecules could promote the aggregation of Cit-Ag NPs and Ag₂S NPs by interparticle bridging. As the final transformation form of Ag NPs in water environments, Ag₂S NPs had better stability, possibly due to their small van der Waals forces and their strong steric repulsive forces. It is essential to elucidate the surface mechanisms between EPS and NPs to understand the different fates of metal-based and metal-sulfide NPs in WWTP systems.     

Product identification and toxicity change during oxidation of methotrexate by ferrate and permanganate in water

• Oxidation of methotrexate by high-valent metal-oxo species was first explored. • Fe(VI) presented a higher reactivity to MTX than Mn(VII) at pH 8.0. • Ketonization and cleavage of peptide bond were two initial reaction pathways. • Products of MTX were not genotoxic, neurotoxic, or endocrine-disrupting chemicals. • The less biodegradable products exhibited developmental and acute/chronic toxicity. Accompanying an annual increase in cancer incidence, the global use of anticancer drugs has remarkably increased with their worldwide environmental prevalence and ecological risks. In this study, the oxidation of methotrexate (MTX), a typical anticancer drug with ubiquitous occurrence and multi-endpoint toxicity, by ferrate(VI) (Fe(VI)) and permanganate (Mn(VII))) was investigated in water. Fe(VI) exhibited a higher reactivity with MTX (93.34 M⁻¹ s⁻¹) than Mn(VII) (3.01 M⁻¹ s⁻¹) at pH 8.0. The introduction of Cu(II) and Fe(III) at 1.0 mM improved the removal efficiency of 5.0 μM MTX by 100.0 μM Fe(VI) from 80% to 95% and 100% after 4 min, respectively. Seven oxidized products (OPs) were identified during oxidative treatments, while OP-191 and OP-205 were characterized as specific products for Fe(VI) oxidation. Initial ketonization of the L-glutamic acid moiety and cleavage of the peptide bond of MTX were proposed. Additionally, a multi-endpoint toxicity evaluation indicated no genotoxicity, neurotoxicity, or endocrine-disrupting effects of MTX and its OPs. Particularly, serious developmental toxicity in zebrafish larvae was observed in the treated MTX solutions. Based on the acute and chronic aquatic toxicity prediction, OP-190, OP-192, OP-206, and OP-208 were deemed toxic or very toxic compared to harmful MTX. Furthermore, the reduced biodegradability index from 0.15 (MTX) to −0.5 to −0.2 (OP-192, OP-206, and OP-468) indicated the formation of lower biodegradable OPs. Overall, this study suggests that Fe(VI) and Mn(VII) oxidation are promising treatments for remediating anticancer drug-contaminated water. However, the environmental risks associated with these treatments should be considered in the evaluation of water safety.     

Recent advances in antimony removal using carbon-based nanomaterials: A review

• The synthesis and physicochemical properties of various CNMs are reviewed. • Sb removal using carbon-based nano-adsorbents and membranes are summarized. • Details on adsorption behavior and mechanisms of Sb uptake by CNMs are discussed. • Challenges and future prospects for rational design of advanced CNMs are provided. Recently, special attention has been deserved to environmental risks of antimony (Sb) element that is of highly physiologic toxicity to human. Conventional coagulation and ion exchange methods for Sb removal are faced with challenges of low efficiency, high cost and secondary pollution. Adsorption based on carbon nanomaterials (CNMs; e.g., carbon nanotubes, graphene, graphene oxide, reduced graphene oxide and their derivatives) may provide effective alternative because the CNMs have high surface area, rich surface chemistry and high stability. In particular, good conductivity makes it possible to create linkage between adsorption and electrochemistry, thereby the synergistic interaction will be expected for enhanced Sb removal. This review article summarizes the state of art on Sb removal using CNMs with the form of nano-adsorbents and/or filtration membranes. In details, procedures of synthesis and functionalization of different forms of CNMs were reviewed. Next, adsorption behavior and the underlying mechanisms toward Sb removal using various CNMs were presented as resulting from a retrospective analysis of literatures. Last, we prospect the needs for mass production and regeneration of CNMs adsorbents using more affordable precursors and objective assessment of environmental impacts in future studies.     

粉煤灰合成NaA型沸石对重金属离子的吸附动力学

以粉煤灰为原料,采用两步法合成了单一沸石矿物种的NaA型沸石,对合成产物的结构和性能进行了表征.通过静态吸附实验,研究了NaA型沸石对水溶液中Cu(ΙΙ)、Cr(Ⅵ)和Zn(ΙΙ)离子的吸附特性,从动力学角度探讨了吸附机理.结果表明,在所研究的浓度和pH值条件下,NaA型沸石对3种重金属的吸附符合Langmuir等温吸附方程,静态饱和吸附量(Qm)分别为82.30,65.96,47.78mg/g;3种金属离子在水溶液中的存在方式和大小是影响它们吸附行为的主要因素,通过动边界模型推算表明:NaA型沸石对Cu(ΙΙ)和Zn(ΙΙ)离子的吸附过程的速度控制步骤为液膜扩散,对Cr(Ⅵ)离子的吸附过程的速度控制步骤为颗粒扩散,3种金属离子的吸附过程符合伪二级方程.     

β-环糊精微球吸附对苯二酚单甲基醚的动力学研究

研究了以β-环糊精(β-CD)和环氧氯丙烷为原料,采用反相悬浮聚合法合成的β-CD微球对对苯二酚单甲基醚( HQMME)的静态吸附行为,分析了吸附热力学性质和动力学特征.实验结果表明:β-CD微球对HQMME的吸附过程同时符合Lagergren一级吸附动力学方程和McKay二级吸附动力学方程;β-CD微球对HQMME的吸附等温线可同时用Langmuir等温吸附方程和Freundlich等温吸附方程描述;在不同温度下,β-CD微球吸附HQMME的吸附焓变、吸附熵变、吸附吉布斯自由能变均为负值,说明吸附是一个自发、放热的过程.     

A Literature Review of Poly(Lactic Acid)

A literature review is presented regarding the synthesis, and physicochemical, chemical, and mechanical properties of poly(lactic acid)(PLA). Poly(lactic acid) exists as a polymeric helix, with an orthorhombic unit cell. The tensile properties of PLA can vary widely, depending on whether or not it is annealed or oriented or what its degree of crystallinity is. Also discussed are the effects of processing on PLA. Crystallization and crystallization kinetics of PLA are also investigated. Solution and melt rheology of PLA is also discussed. Four different power-law equations and 14 different Mark–Houwink equations are presented for PLA. Nuclear magnetic resonance, UV–VIS, and FTIR spectroscopy of PLA are briefly discussed. Finally, research conducted on starch–PLA composites is introduced.     

煤和瓦斯突出过程中瓦斯作用机理的研究

阐述了瓦斯在煤和瓦斯突出过程中所起的作用 ;指出煤层中瓦斯的存在改变了煤岩体的物理力学性质及响应特性 ,使之成为非稳定介质 ;特别强调在瓦斯突出发生时 ,瓦斯膨胀能起了至关重要的作用 ;由于瓦斯的存在 ,加剧了煤体失稳破坏的过程。     

催化铁内电解法处理硝基苯废水的机理与动力学研究

对催化铁内电解法处理硝基苯废水降解动力学特性进行了研究。结果表明,降解过程符合准一级动力学规律。进水浓度、pH值和反应温度强烈影响硝基苯的降解速率。在实验pH值范围内,反应速率常数依次为:强酸性>弱碱性>弱酸性>中性;循环伏安扫描图显示了硝基苯可以在铜电极上直接得电子还原,该反应在强酸和弱碱性条件下效果较好。反应速率常数随进水浓度的增大而减小。提高反应温度可改善处理效果,在30~45℃范围内,提高温度对处理效果的改善并不显著;当温度升高到45℃以上时,升温可以显著改善处理效果。     

新农药硫肟醚在土壤中的降解

在实验室条件下对新农药硫肟醚[o-(3-苯氧苄基)-2-甲硫基-1-(4-氯苯基)丙基酮肟醚]在不同地区土壤中的降解动态进行了研究.结果表明,硫肟醚在土壤中的降解遵循一级动力学方程.硫肟醚在非灭菌与灭菌长沙粉砂质黏土中的降解速率常数(k)分别为8.106×10^-3和1.630×10^-3,半衰期分别为85.5d和425.2d,微生物对硫肟醚在土壤中的降解具有显著的影响.硫肟醚在3种土壤中的降解速率大小依次为湖南永州重黏土>甘肃天水黏土>辽宁沈阳粉砂质黏土,其降解半衰期分别为46.1,63.8,70.0d,降解速率常数分别为1.503×10^-2,1.087×10^-2,9.904×10^-3.根据国内农药在土壤中的残留期划分标准,硫肟醚属于较易降解类农药.     

废镉镍电池中镉优先浸出工艺

通过CdO、NiO酸浸反应的热力学和动力学研究 ,得知CdO、NiO二者的浸出条件有较大差异 ,实验确定了废镉镍电池中镉优先浸出的工艺条件 :5 0℃、pH =2的硫酸溶液中浸 5 0min ,在此工艺条件下 ,镉能 10 0 %浸出 ,而镍的浸出率只有 2 5 %。