Work-related road safety: A case study of Roche Australia

Fleet, work-related or occupational road safety has the potential to make a major contribution to reducing both human harm and asset damage. To date, however, there would appear to be a dearth of well researched and evaluated case studies in the public domain in this area.This paper provides an on-going, documented, real-world case study of work-related road safety within an Australian company that has sought to manage, monitor and improve its road safety performance over the last 5 years through a range of proactive, fleet manager, insurance and risk-led initiatives.Roche Australia has successfully implemented a Company Motor Vehicle Safety Program with support from its fleet insurers and risk management advisors. Four key initiatives are set out covering: (1) Driver risk assessment, monitoring and improvement. (2) Policy development and communications. (3) Process and outcomes evaluation. (4) Continuous review and refinement of policies, processes, programs and future developments.The program has led to a range of process and performance-based outcomes. Typical barriers to success in work-related road safety have been identified and overcome. Almost 100% risk assessment and improvement process compliance by drivers has been achieved. A predictive relationship between risk assessment outcomes and collision history has been identified. Reductions in insurance claims, collision costs and claims ratio have been sustained. A detailed project plan is in place to continue the program for the next 3 years.The paper concludes that with effective management, a well developed work-related road safety program can result in performance improvements within the initiating organisation. Several limitations in the case study methodology, as well as areas for further work and lessons for policy makers, researchers and practitioners are also identified.     

A cost effective method for decentralized sewage treatment

The aim of this research was to upgrade the performance of a conventional septic tank (CST) for on-site treatment of sewage with negligible costs. Although CST is known as an inexpensive pre-treatment system, a complementary treatment is required to reuse its output effluent. In this work, the quality of treated wastewater reached to the standard level for irrigation by the innovational changes made in the structure of CST for converting it into an advanced septic reactor (ASR). The modification consists adding some pipe and trays without using any mechanical or electrical equipment.ASR was operated at ambient temperatures in laboratory and pilot-scale. The effects of up-flow velocities (V_up) of 0.4, 0.5, 0.7, 1 and 1.5 m/h and hydraulic retention times (HRT) of 36, 24 and 12 h on the ASR treatment performance were studied.For optimum V_up of 1 m/h and HRT of 24 h and biomass specific methanogenic activity (SMA) of 0.31 mg COD/g VSS d the maximum removal of chemical oxygen demand (COD), biochemical oxygen demand (BOD5) and total suspended solids (TSS) were 86.2%, 79.4% and 95%, respectively.The results showed that ASR is an appropriate alternative for CST for sewage on-site treatment by a low cost modification.     

Elimination of antibiotic resistance genes and control of horizontal transfer risk by UV-based treatment of drinking water: A mini review

Antibiotic-resistant bacteria and antibiotic resistance genes are in water bodies. UV/chlorination method is better to remove ARGs than UV or chlorination alone. Research on UV/hydrogen peroxide to eliminate ARGs is forthcoming. UV-based photocatalytic processes are effective to degrade ARGs. Antibiotic-resistant bacteria (ARB) and antibiotic resistance genes (ARGs) have been recognized as one of the biggest public health issues of the 21st century. Both ARB and ARGs have been determined in water after treatment with conventional disinfectants. Ultraviolet (UV) technology has been seen growth in application to disinfect the water. However, UV method alone is not adequate to degrade ARGs in water. Researchers are investigating the combination of UV with other oxidants (chlorine, hydrogen peroxide (H₂O₂), peroxymonosulfate (PMS), and photocatalysts) to harness the high reactivity of produced reactive species (Clž·, ClOž·ž, Clž₂·ž⁻, žž·OH, and SOž₄ž·⁻€) in such processes with constituents of cell (e.g., deoxyribonucleic acid (DNA) and its components) in order to increase the degradation efficiency of ARGs. This paper briefly reviews the current status of different UV-based treatments (UV/chlorination, UV/H₂O₂, UV/PMS, and UV-photocatalysis) to degrade ARGs and to control horizontal gene transfer (HGT) in water. The review also provides discussion on the mechanism of degradation of ARGs and application of q-PCR and gel electrophoresis to obtain insights of the fate of ARGs during UV-based treatment processes.     

Experimental study on biomass advanced reburning for nitrogen oxides reduction

Advanced reburning (AR) is effective for nitrogen oxides (NO_x) reduction, which integrates the basic reburning (BR) with the injection of nitrogen agents and additive compounds. The basic reburning of poplar, cornstalk, wheat-straw and peanut shell, is studied on a boiler simulator facility (BSF). The influence of operating parameters and the synergistic effect of the injection of ammonia, urea or/and sodium carbonate on NO_x reduction are investigated. The results show that an efficiency of 54–67% NO_x reduction could be achieved during the basic reburning process under the optimum operating conditions and the efficiency would be increased if nitrogen agent is injected with the over-fire air or into the burnout zone. Further, co-injection of sodium carbonate with the nitrogen agent could make the NO_x reduction process more thorough. On the whole, 85–92% NO_x reduction could be achieved during the advanced reburning process with a reburning fuel heat input of 15–20%.     

甲基叔丁基醚的污染治理技术研究进展

甲基叔丁基醚(MTBE)是一种无铅汽油添加剂,其广泛使用造成了土壤和地下水污染;同时对人类有可疑致癌作用,因此成为人们关注的焦点.对近年来国外MTBE的污染治理技术研究进展进行了综述,并对主要方法进行了对比.在适宜的微生物存在条件下,MTBE的生物降解是可以发生的;植物修复技术可用于地下水和土壤污染治理;物理化学方法种类繁多,包括吸附和高级氧化等,其处理效率高成本也较高;新的处理技术如渗透性活性障壁PRB、膜分离/催化技术等也在研究之中.     

铁路物流中心海产品高污染有机污水处理工艺研究

通过海产品加工生产污水处理站“设计施工系统联调联试”的全过程,对其污水性质及特点进行分析,采取以“气浮+ICER生化”为核心的污水处理工艺,结合污水处理系统联调联试,从提温降盐、确定混凝剂投放量及活性污泥培养驯化等方面进行工艺改进,以确保污水达到《污水综合排放标准》(GB 89781996)二级标准。     

Micropollutant removal during biological wastewater treatment and a subsequent ozonation step

The design criteria for wastewater treatment plants (WWTP) and the sludge retention time, respectively, have a significant impact on micropollutant removal. The upgrade of an Austrian municipal WWTP to nitrogen removal (best available technology, BAT) resulted in increased elimination of most of the analyzed micropollutants. Substances, such as bisphenol-A, 17α-ethinylestradiol and the antibiotics erythromycin and roxithromycin were only removed after the upgrade of the WWTP. Nevertheless, the BAT was not sufficient to completely eliminate these compounds. Thus, a pilot scale ozonation plant was installed for additional treatment of the effluent. The application of 0.6 g O₃ g DOC⁻¹ increased the removal of most of the micropollutants, especially for compounds that were not degraded in the previous biological process, as for example carbamazepine and diclofenac. These results indicated that the ozonation of WWTP effluent is a promising technology to further decrease emissions of micropollutants from the treatment process.     

The functional and physiological status of Gammarus fossarum (Crustacea; Amphipoda) exposed to secondary treated wastewater

Climate change scenarios predict lower flow rates during summer that may lead to higher proportions of wastewater in small and medium sized streams. Moreover, micropollutants (e.g. pharmaceuticals and other contaminants) continuously enter aquatic environments via treated wastewater. However, there is a paucity of knowledge, whether extended exposure to secondary treated wastewater disrupts important ecosystem functions, e.g. leaf breakdown. Therefore, the amphipod shredder Gammarus fossarum was exposed to natural stream water (n = 34) and secondary treated wastewater (n = 32) for four weeks in a semi-static test system under laboratory conditions. G. fossarum exposed to wastewater showed significant reductions in feeding rate (25%), absolute consumption (35%), food assimilation (50%), dry weight (18%) and lipid content (22%). Thus, high proportions of wastewater in the stream flow may affect both the breakdown rates of leaf material and thus the availability of energy for the aquatic food web as well as the energy budget of G. fossarum.     

Fluid bed gasification – Plasma converter process generating energy from solid waste: Experimental assessment of sulphur species

Often perceived as a Cinderella material, there is growing appreciation for solid waste as a renewable content thermal process feed. Nonetheless, research on solid waste gasification and sulphur mechanisms in particular is lacking. This paper presents results from two related experiments on a novel two stage gasification process, at demonstration scale, using a sulphur-enriched wood pellet feed.Notable SO₂ and relatively low COS levels (before gas cleaning) were interesting features of the trials, and not normally expected under reducing gasification conditions. Analysis suggests that localised oxygen rich regions within the fluid bed played a role in SO₂’s generation. The response of COS to sulphur in the feed was quite prompt, whereas SO₂ was more delayed. It is proposed that the bed material sequestered sulphur from the feed, later aiding SO₂ generation. The more reducing gas phase regions above the bed would have facilitated COS – hence its faster response. These results provide a useful insight, with further analysis on a suite of performed experiments underway, along with thermodynamic modelling.