Pollution levels and characteristics of phthalate esters in indoor air in hospitals

The concentrations of phthalate esters(PAEs) in Chinese hospitals were investigated by simultaneously determining concentrations of gas- and particle-phase PAEs. PAEs were detected in two third-class first-grade hospitals, two second-class first-grade hospitals, and a community health service center. Hospital drugstores had the highest concentration(24.19 μg/m3), which was 1.54 times that of newly decorated houses. The second highest concentration was found in the transfusion rooms, averaging 21.89 μg/m3; this was followed by the concentrations of PAEs in the nurse's workstations, the wards, and the doctor's offices, with mean concentrations of 20.66, 20.0, and 16.92 μg/m3, respectively. The lowest concentrations were found in the hallways(16.30 μg/m3). Of the six different kinds of PAEs found, major pollutants included diethyl phthalates, dibutyl phthalates, butylbenzyl phthalates and di(2-ethylhexyl) phthalates, comprising more than 80% of all PAEs present.Meanwhile, a comparison between different wards showed that PAE concentrations in the maternity wards were 1.63 times higher than in the main wards. Based on known health hazards, our results suggest that the PAEs seriously influence the health of the pregnant women and babies; therefore, it is of great importance to take the phthalate concentrations in hospitals into consideration. In addition, hospital indoor air was more seriously contaminated than the air of newly decorated houses.     

大气VOCs在线监测系统测量准确性分析

基于在线气相色谱-氢火焰离子检测/质谱(GC-FID/MS)方法,在线测量116种大气挥发性有机物的性能指标(线性关系、检出限、精密度、正确度、期间正确度和期间精密度).基于在线监测系统连续7d的实际运行情况,定量评估116种有机物在实际长期运行中测量的准确性和可靠性.结果 表明,116种组分中,109种组分的线性相关...     

江苏省“十一五”环境质量状况及成因分析

结合江苏省“十一五”期间环境质量状况及变化情况,综合分析了环境空气、水环境、声环境质量及污染物排放状况.“十一五”期间,江苏省经济总量以13.5％的平均速度增长,社会、经济的快速发展给全省环境质量带来巨大的胁迫压力,资源能源消耗迅速攀升,“三废”产生总量持续增长;而由于加大了节能减排和环境治理投入力度,采取了一系列措施...     

Effects of gas flow rate, inlet concentration and temperature on the biofiltration of toluene vapors

In this work the variation in the elimination capacity of a biofilter as a function of the gas flow and toluene concentration was studied. A bioreactor 0.75 m high x 14.5 cm diameter was used, divided into three equal stages, using compost to support the microorganisms, and sea shells to control the pH. The biofiltration of toluene was evaluated for flows between 0.12 and 0.73 m(3)h(-1) in a concentration range of 1-3.2 gm(-3). It was observed that on increasing the toluene inlet load by 90% (from 37 to 70 gm(3)h(-1)), the conversion by the biofilter varied by only 5% (from 98% to 93%). The biofiltration system used achieved elimination capacities of up to 82 gm(-3)h(-1) for a toluene load of 100 gm(-3)h(-1).     

Air assimilative capacity-based environment friendly siting of new industries--a case study of Kochi region, India

Air pollution has become a matter of grave concern, particularly in mega-cities and urban areas, where the situation is alarming and becoming more and more severe day-by-day and warrants, therefore, careful planning to facilitate future industrial development. Site selection, with the objective of minimizing adverse environmental impacts based on environmental criteria is a vital prerequisite, particularly for air polluting industries. In order to locate any air polluting industry, the assimilative capacity of the region needs to be assessed carefully and planned accordingly, so that the receiving environment is not adversely affected. Assimilative capacity of a region/airshed, widely represented through the ventilation coefficient by many researchers in the past, does not give a clear picture about the amount of emission load that can be assimilated in a given region. The ventilation coefficient, at best, can only present a broad picture about the air pollution dispersion potential (low, medium or high) of the region. A modified approach, which utilizes air quality modelling as a tool to estimate the maximum allowable emission load that a region can assimilate without violating the stipulated standards, has been used for estimating the assimilative capacity of the air environment. Details of this approach have been presented in this paper through a case study carried out for the Kochi region, located in the Kerala State of India. A variety of emission and meteorological scenarios have been considered and critical emission loads have been estimated. This approach shall provide necessary technical guidance to the environmental regulatory authorities as well as to the industries in planning environment friendly industrial development.     

A framework for assessing the impact of land use policy on community exposure to air toxics

Our research focuses on the linkage between land use planning policy and the spatial pattern of exposure to air toxics emissions. Our objective is to develop a modeling framework for assessment of the community health risk implications of land use policy. The modeling framework is not intended to be a regulatory tool for small-scale land use decisions, but a long-range planning tool to assess the community health risk implications of alternative land use scenarios at a regional or subregional scale. This paper describes the development and application of an air toxic source model for generating aggregate emission factors for industrial and commercial zoning districts as a function of permitted uses. To address the uncertainty of estimating air toxics emission rates for planned general land use or zoning districts, the source model uses an emissions probability mass function that weights each incremental permitted land use activity by the likelihood of occurrence. We thus reduce the uncertainty involved in planning for development with no prior knowledge of the specific industries that may locate within the land use district. These air toxics emission factors can then be used to estimate pollutant atmospheric mass flux from land use zoning districts, which can then be input to air dispersion and human health risk assessment models to simulate the spatial pattern of air toxics exposure risk. The model database was constructed using the California Air Toxics Inventory, 1997 US Economic Census, and land assessment records from several California counties. The database contains information on more than 200 air toxics at the 2-digit Standard Industrial Classification (SIC) level. We present a case study to illustrate application of the model. LUAIRTOX, the interactive spreadsheet model that applies our methodology to the California data, is available at http://www2.bren.ucsb.edu/~mwillis/LUAIRTOX.htm.     

Developing the interaction matrix technique as a tool assessing the impact of traffic on air quality

This paper develops a technique which can be used as a preliminary tool for assessing air quality related to urban traffic. It combines a Geographic Information System (GIS) with an interaction matrix-type methodology based on a system analysis approach. The matrix identifies and quantifies interactions between all selected variables involved in a system as well as their interaction with the system as a whole. This matrix is used to determine the weightings to apply to spatial datasets within a GIS to develop a pollution vulnerability map. The focus of the paper is to introduce and assess a more versatile coding of the interaction matrix with respect to previously used coding. A case study is presented in which the modified interaction methodology is applied to data for a busy urban location. The resulting vulnerability map, in terms of pollution vulnerable hot spots, was compared to a pollution map derived from an advanced dispersion model. The interaction matrix technique with GIS can be used as a tool complementary to sophisticated numerical modelling and has potential as an analytical tool to evaluate multidisciplinary systems.     

Environmental Equity and the Role of Public Policy: Experiences in the Rijnmond Region

This Φ Ψ study of environmental equity uses secondary quantitative data to analyze socioeconomic disparities in environmental conditions in the Rijnmond region of the Netherlands. The disparities of selected environmental indicators—exposure to traffic noise (road, rail, and air), NO₂, external safety risks, and the availability of public green space—are analyzed both separately and in combination. Not only exposures to environmental burdens (“bads”) were investigated, but also access to environmental benefits (“goods”). Additionally, we held interviews and reviewed documents to grasp the mechanisms underlying the environmental equity situation, with an emphasis on the role of public policy. Environmental equity is not a priority in public policy for the greater Rotterdam region known as the Rijnmond region, yet environmental standards have been established to provide a minimum environmental quality to all local residents. In general, environmental quality has improved in this region, and the accumulation of negative environmental outcomes (“bads”) has been limited. However, environmental standards for road traffic noise and NO₂ are being exceeded, probably because of the pressure on space and the traffic intensity. We found an association of environmental “bads” with income for rail traffic noise and availability of public green space. In the absence of regulation, positive environmental outcomes (“goods”) are mainly left up to market forces. Consequently, higher-income groups generally have more access to environmental “goods” than lower-income groups.     

黄药废水处理的研究现状及展望

黄药是浮选金属硫化矿物应用最广、最有效的捕收剂,但其在选矿废水中的残留会对环境造成严重污染。黄药废水净化排放及回水利用不仅对环境有利,且符合选厂经济利益。本文主要介绍了近年来常用的黄药废水净化处理方法,并对未来黄药废水处理方向进行了展望,以其对黄药选矿废水的治理提供一定的参考价值。     

Modelling individual preferences for environmental policy drivers: Empirical evidence of Italian lifestyle changes using a latent class approach

Degraded air quality severely affects the health of citizens worldwide. The design of effective policies requires exploring public preferences for environmental and air quality policy instruments. Within the EC-FP7 SEFIRA project, using a choice experiment that stresses the trade-offs between attributes, this study investigates public preferences for environmental policy drivers in Italy. The main objective is to investigate the role played by selected policy drivers in determining policy preferences, complemented by elasticity and willingness to pay estimations. Preference heterogeneity and the role of socio-economic and attitudinal variables are explored with a latent class model over 2400 respondents sampled across Italy. The results allow identifying the different role played by the policy drivers across the classes. It emerged that most of the respondents (43%) are particularly sensitive to the cost components (cost sensitive respondents). The remaining respondents instead show an important sensitivity towards personal engagement in term of changes in the mobility and eating habits (lifestyle-change sensitive respondents). However, while 29% of them perceive these habits’ changes as negatively impacting on the personal utility, the other 28% of respondents translate the potential changes in the habitual behaviour of driving and eating as environmental and health benefits. Based on the modelling results, potential policies are simulated reporting respondents’ reaction to selected scenarios. It shows the crucial role played by reduction of premature deaths due to atmospheric pollution and measure cost.