废纸浆造纸废水处理工程实践

针对造纸废水中CODCr,SS等浓度较高的特征，以某年产5万t包装纸厂为例，采用水解酸化-CASS-气浮联合工艺处理某废纸纸浆造瓦楞纸项目废水，一年多的运行结果表明：整个废水处理系统的CODCr去除率大于97％，出水中CODCr，BOD5和SS质量浓度分别为60-80mg／L，10-20mg／L和60-80mg／L。整个废水系统投资和运行费用低，投资规模在0.05-0．06万元／（m^3·d），运行费用≤0．6元／m^3。     

白银露天矿粉尘污染预报及控制管理模式的研究

在白银露天矿污染气象站五年的污染气象观测基础上,分析了采场粉尘浓度与污染源强度和气象因素之间的相关性,提出了粉尘污染预报的模式和方法,其准确率达到66.9％。并以粉尘污染预报模式为依据。提出了污染源控制管理模式。试验表明利用本模式对污染源实施控制管理具有实用意义和价值。     

Work domain analysis for air traffic controller weather displays

INTRODUCTION: Adverse weather conditions have a major impact on National Airspace System (NAS) operations. They create safety hazards for pilots, constrain the usable airspace for air traffic control (ATC), and reduce the overall capacity of the NAS. A system-wide dissemination of weather information to controllers could theoretically improve safety and efficiency. PROBLEM: However, it is currently unclear what weather information would be beneficial for tactical operations. Furthermore, no previous research has empirically evaluated optimal presentation designs for ATC weather displays. Ill-designed weather displays can cause safety hazards by presenting redundant information (i.e., by increasing the cognitive load) and display clutter (e.g., by interfering with the visual extraction of traffic data). METHOD: In the present paper, we outline our use of cognitive work analysis (CWA) techniques for the assessment of weather information needs for terminal controllers. RESULTS: Specifically, we describe how the CWA modeling tools helped us reveal instances in the terminal domain where weather information is lacking or insufficiently disseminated. We used our CWA results to drive the development of weather display concepts and to set up a high-fidelity simulation capability. IMPACT ON INDUSTRY: By means of high-fidelity simulations, we can empirically evaluate controller weather information needs in order to propose weather displays for increased aircraft safety and efficiency of terminal operations.     

Acute and sub-lethal toxicity of landfill leachate towards two aquatic macro-invertebrates: demonstrating the remediation potential of air stripping

A specific leachate that contained 1.036 mg l(-1) of 2-chlorobiphenyl was used in the study (255 mg l(-1) COD and 133 mg l(-1) BOD5). Bench scale (20 l) air stripping trials were used to simulate on a small-scale the treatment potential of this method. Air stripping effectively reduced the leachates COD concentration. Regardless of the volume of air supplied (1-5 l of air per minute) the leachates COD reached a <50 mg l(-1) equilibrium after 96-h exposure, however, increasing the volume of air accelerated the process. In untreated leachate, the LC50 for Asellus aquaticus was 57% v/v leachate in deionised water and 5% for Gammarus pulex (96-h, static LC50 tests without nutrition and oxygen depleting conditions). After being exposed to air stripping, these values rose from 90% to below the LC50 threshold for Asellus when 1-5 l of air per minute were applied and 30-90% for Gammarus. Furthermore, in sub-lethal concentrations of air stripped leachate (leachate that had been exposed to 5-l of air per minute for 96-h) the population dynamics of both test species remained unaltered.     

Mechanical treatment of automobile shredder residue for its application as a fuel

Enforcement of the Automobile Recycling Law in Japan requires utilization of automobile shredder residue (ASR). However, the high contents of copper (∼5%) and chlorine (∼1%) in ASR stand in the way of practical application. We studied methods for the removal of copper and chlorine from ASR so that it could be utilized as a fuel. By compression of the ASR for solidification with an extruder, the polyvinylchloride (PVC) that covered electrical cables was softened and stripped from the copper wire. The solidified ASR was comminuted with cutter mills and classified by dry density separation. The copper content of the obtained light products was 0.2%–0.5%. Furthermore, we studied the possibility of dechlorination of the ASR by mechanochemical (MC) activation. The light product of the ASR was milled with CaO or CaCO₃. The chlorine content decreased to about one-tenth of the original value after MC activation over 8 h. Therefore, the combined processing of softening–stripping and comminution liberated the PVC-covered cables and decreased the copper content of the ASR. In addition, dechlorination of the ASR was also possible by MC activation with the addition of calcium compounds.     

Sampling of airborne polycyclic aromatic hydrocarbons with semipermeable membrane devices

Semipermeable membrane devices (SPMDs) are nowadays used as passive samplers of organic pollutants. The knowledge of the sampling rate values (R_S) of each substance trapped on membranes is necessary to calculate their average concentration. Here we calculate R_S values for 16 polycyclic aromatic hydrocarbons using the comparison of active sampling method results and the amounts sequestered by SPMDs at varying exposure times.Selected article from the Regional Symposium on Chemistry and Environment, Krusevac, Serbia, June 2003, organized by Dr. Branimir Jovancicevic.     

Estimating receptor sensitivity to spatial proximity of emissions sources

Spatial proximity of emissions sources to receptors may affect sensitivity to potential adverse human health effects. This research investigates whether receptor sensitivity to the location of emission sources can be utilized efficiently to minimize health risk in selecting sites for industrial enterprises, thermal electric stations, etc. A sensitivity function that is independent of the location of pre-existing emission sources is derived and applied to Minsk, Belarus. The function estimates exposures based on weather and climatic conditions as well as the distribution of population density at a given locality. Arraying prospective sites based on their sensitivity function magnitude provides a technique for minimizing health risk based on receptor sensitivity to the spatial proximity of atmospheric emissions sources.     

晋普山煤矿3~#风井主要通风机安全技术参数测定与分析

晋普山煤矿原有 1#、2 #两个回风井 ,随着生产的扩大 ,新开掘了 3#回风井 ,并新安装了 2台 2K60 -№ 2 8风机即 5 #、6 #风机。根据《煤矿安全规程》的要求 ,在新风机投入运行之前 ,必须进行性能鉴定 ,同时为掌握 3#风井新安装的两台风机实际性能 ,对矿井通风系统改造提供依据 ,笔者分别对 5 #、6 #风机叶片安装角为 2 5°、2 0°和 15°进行了性能鉴定。根据鉴定结果进行了合理分析。     

Evaluation of the First Phase of Sulfur Dioxide and Nitrogen Oxides Provisions of the 1990 Clean Air Act: A Plant-Based Approach

Electric power generating plants that use coal were among the key targets of Title IV of the 1990 Clean Air Act. Under the first phase of the act, 110 coal-fired electric power plants were required to reduce their sulfur dioxide emissions by 1995 and nitrogen oxide emissions by 1996. Phase 2 of the act requires even greater reduction of sulfur dioxide emissions by 2000 and nitrogen oxide emissions by 2008. This study examines whether the 107 targeted plants (three plants went off-line) have achieved the desired sulfur dioxide and nitrogen oxide emission levels. The analysis of sulfur dioxide is based on data from 1990, 1995, and 1999. The findings show that although sulfur oxide increased by 3% from 1995 to 1999, it decreased by 45% over the 1990–1999 period at the firm level for the targeted firms. The findings also indicate that the overall reduction in sulfur dioxide was achieved by utilizing low sulfur coal and by purchasing emission allowances. So far as nitrogen oxides are concerned, there has been a reduction of 14% over the 1990–1999 period, of which 7% was achieved during the 1995–1999 period. An evaluation of emissions at the plant level indicates that several plants do not meet the emissions level for sulfur dioxide or nitrogen oxides. These results provide a mixed scorecard for reduction in emissions both for sulfur dioxide and nitrogen oxides. Even though there is reduction in the emissions on an overall basis at the firm level, several plants that have not been able to reduce emissions deserve special attention to meet the goals of the act in reducing emissions.     

高层建筑热压中和面位置的确定

根据通风网络理论 ,结合建筑物各楼层门窗间的串并联关系 ,率先引入了能够反映建筑门窗结构和气密性特征的特征参量“风阻” ,并应用中和面上、下渗进渗出风量平衡的关系 ,得出了求解热压中和面位置的一元方程式 ,使建筑热压中和面的求解成为可能