铁路车站X射线行李包检查系统放射防护情况调查

为调查铁路车站X射线行李包检查系统放射防护水平,2017年至2019年对6个铁路车站3种型号检测系统的行李包入口和出口,系统上盖板、左侧、右侧5个位置的空气比释动能率进行620台次检测.结果显示,620台次检测的空气比释动能率检查结果均合格,不同型号、不同检测位置空气比释动能率有统计学差异,其中C型5个检测位置的空气比...     

钙法提钒尾渣的浮选脱硫试验

根据钙法提钒尾渣的矿物特性,采用浮选法分离其中的石膏以实现脱硫,分别考察了矿浆pH、矿浆液固比、捕收剂添加量及浮选中水循环次数等因素对浮选指标的影响,并进行了理论分析,确定了钙法提钒尾渣浮选脱硫的优选工艺参数.试验结果表明,在矿浆pH为7、矿浆液固比为5:1、捕收剂添加量为0.6～0.8 kg/t的条件下,可获得w(S...     

沈阳地区冬季空气颗粒物输送路径及潜在源分析

文章利用2016～2017年冬季沈阳地区气象数据和环境空气污染物浓度数据,综合分析沈阳地区冬季环境空气污染特征,分析颗粒物输送路径以及潜在源区贡献情况.结果表明,沈阳地区冬季污染时段内PM2.5是主要污染物,PM2.5平均浓度达到149μg/m3,最大值达到273 μg/m3.沈阳地区环境空气颗粒物除来源于本地排放外,...     

气相色谱法测定空气和废气中8种烃类化合物

建立了针筒采样、大口径毛细管柱分离、气相色谱-氢火焰离子化检测器测定空气和废气中甲烷、乙烷、乙烯、乙炔、丙烷、异丁烷、正丁烷和正戊烷等8种烃类化合物的方法.优化了试验条件,方法线性良好,甲烷、乙烯、乙炔、乙烷、丙烷、异丁烷、正丁烷和正戊烷的检出限分别为0.09 mg/m3、0.20 mg/m3、0.18 mg/m3、0.29 mg/m3、0.28 mg/m3、0.37 mg/m3、0.16 mg/m3和0.56 mg/m3,RSD＜8.0%,加标回收率为80.5%～104%.     

Transformations of particles, metal elements and natural organic matter in different water treatment processes

Characterizing natural organic matter （NOM）, particles and elements in different water treatment processes can give a useful information to optimize water treatment operations. In this article, transformations of particles, metal elements and NOM in a pilot-scale water treatment plant were investigated by laser light granularity system, particle counter, glass-fiber membrane filtration, inductively coupled plasma-optical emission spectroscopy, ultra filtration and resin absorbents fractionation. The results showed that particles, NOM and trihalomethane formation precursors were removed synergistically by sequential treatment of different processes. Preozonation markedly changed the polarity and molecular weight of NOM, and it could be conducive to the following coagulation process through destabilizing particles and colloids; mid-ozonation enhanced the subsequent granular activated carbon （GAC） filtration process by decreasing molecular weight of organic matters. Coagulation-flotation and GAC were more efficient in removing fixed suspended solids and larger particles; while sand-filtration was more efficient in removing volatile suspended solids and smaller particles. Flotation performed better than sedimentation in terms of particle and NOM removal. The type of coagulant could greatly affect the performance of coagulation-flotation. Pre-hydrolyzed composite coagulant （HPAC） was superior to FeCl3 concerning the removals of hydrophobic dissolved organic carbon and volatile suspended solids. The leakages of flocs from sand-filtration and microorganisms from GAC should be mitigated to ensure the reliability of the whole treatment system.     

The synergistic effect of air mass on outdoor performance for different PV module in India

The effect of air mass (AM) on the performance of multi-crystalline silicon (m-Si), amorphous silicon (a-Si), and hetero-junction with intrinsic thin layer (HIT)-technology-based photovoltaic (PV) modules are evaluated for representative day of four seasons during the year 2011 for composite climate of India. To find the best performing PV module technology with respect to AM at the site, annual energy yields and performance ratio against different AM bands (AM 1–4.5) are plotted. It is found that HIT modules perform better than m-Si and a-Si at each AM band. Annual energy yields for all three technologies decrease with increasing order of AM bands. The performance ratio for HIT and m-SI modules initially increases and then decreases with increasing order of AM bands. However, for a-Si modules, the performance ratio decreases with increasing order of the AM bands.     

Oxidative properties of ambient PM2.5 and elemental composition: Heterogeneous associations in 19 European cities

We assessed the extent to which constituents of PM_2.5 (transition metals, sodium, chloride) contribute to the ability to generate hydroxyl radicals (OH) in vitro in PM_2.5 sampled at 20 locations in 19 European centres participating in the European Community Respiratory Health Survey. PM_2.5 samples (n = 716) were collected on filters over one year and the oxidative activity of particle suspensions obtained from these filters was then assessed by measuring their ability to generate OH in the presence of hydrogen peroxide. Associations between OH formation and the studied PM constituents were heterogeneous. The total explained variance ranged from 85% in Norwich to only 6% in Albacete. Among the 20 centres, 15 showed positive correlations between one or more of the measured transition metals (copper, iron, manganese, lead, vanadium and titanium) and OH formation. In 9 of 20 centres OH formation was negatively associated with chloride, and in 3 centres with sodium. Across 19 European cities, elements which explained the largest variations in OH formation were chloride, iron and sodium.     

Neural network forecasting of air pollutants hourly concentrations using optimised temporal averages of meteorological variables and pollutant concentrations

The new method for the forecasting hourly concentrations of air pollutants is presented in the paper. The method was developed for a site in urban residential area in city of Zagreb, Croatia, for four air pollutants (NO₂, O₃, CO and PM₁₀). Meteorological variables and concentrations of the respective pollutant were taken as predictors. A novel approach, based on families of univariate regression models, was employed in selecting the averaging intervals for input variables. For each variable and each averaging period between 1 and 97 h, a separate model was built. By inspecting values of the coefficient of correlation between measured and modelled concentrations, optimal averaging periods for each variable were selected. A new dataset for building the forecasting model was then calculated as temporal moving averages (running means) of former variables. A multi-layer perceptron type of neural networks is used as the forecasting model. Index of agreement, calculated for the entire dataset including the data for model building, ranged from 0.91 to 0.97 for the respective pollutants. As suggested by the analysis of the relative importance of the input variables, different agreements for different pollutants are likely due to different sources and production mechanisms of investigated pollutants. A comparison of the new method with more traditional method, which takes hourly averages of the forecast hour as input variables, showed similar or better performance. The model was developed for the purpose of public-health-oriented air quality forecasting, aiming to use a numerical weather forecast model for the prediction of the part of input data yet unknown at the forecasting time. It is to expect that longer term averages used as inputs in the proposed method will contribute to smaller input errors and the greater accuracy of the model.     

White clover clones as a cost-effective indicator of phytotoxic ozone: 10 years of experience from central Italy

Data collected at one site in central Italy using the NC-S/NC-R clover (Trifolium repens) biotype system during 1997-2007 were analysed in order to assess: (a) its performance under Mediterranean conditions; (b) variations of ozone damage linked with meteorological conditions; (c) if critical level approach is a good predictor of ozone risk on vegetation. NC-S dry biomasses were systematically lower than those of NC-R, the mean ratio being 0.7. Relevant relationship between ozone visible injury and cumulated values of AOT40 were also reported. Temperature and number of rainy days were the most important factors associated with ozone presence and, as a consequence, with leaf injury index. Photosynthetic gas exchange properties indicate that NC-S has higher values of stomatal conductance.