An overview on biogas generation from anaerobic digestion of food waste

Food waste is an inevitable type of waste in every city, and its treatment technology evolves with time. Due to the high organic content and high biodegradability of food waste, anaerobic digestion becomes a commonly accepted treatment method to deal with it. This review article summarizes key factors for anaerobic digestion and provides useful information for successful anaerobic digestions. Reasonable temperature and pH are essential for a successful and productive anaerobic digestion process. A good inoculum to substrate ratio triggers a profitable food waste digestion. Good mixing and small particle sizes are important factors too. In addition, the pros and cons of different reactors to food waste digestion are highlighted. Moreover, co-digestion of food waste with animal manures, sewage sludge, and green waste were introduced.     

Comparative study of photovoltaic technologies based on performance,cost and space requirement: Strategy for selection and application

The module performance is an important consideration for selecting PV technologies for electricity production, as well as the economic aspect. Also, PV energy yield under varying environmental conditions is largely dependent on the type of technology used. Therefore, this article presents a comparative analysis of different PV modules, of the same power, namely, monocrystalline, polycrystalline, amorphous silicon and hybrid, based on performance, cost and space requirement. The performance is evaluated in terms of module power output, yield, capture losses, fill factor and efficiency, according to the IEC 61724 standards, using Gwako, Nigeria as a case study. A novel technique called Fundamental PV Module Performance Analysis is used to analyze and compare the performance of the PV modules. The performance of a single module is then employed to calculate the overall performance of a PV array designed for a small off-grid house, and a suitable module is determined amongst the modules under study. Results provide insights into the behaviors of the different technologies with the environmental factors of the location, which have an impact on their power and kWh/kW outputs and the efficiency. This knowledge, coupled with the understanding of the constraints of cost and the module space requirements would be useful to researchers, engineers, installers etc. in Nigeria, for planning and developing photovoltaic electric systems for off-grid applications.     

Comparison of fatty acid profile in the chicken meat after feeding with narasin,nicarbazin and salinomycin sodium and phyto-additive substances

The purpose of this study was an experimental investigation and a statistical evaluation of the influence of various additives in feed mixtures of broiler chickens on fatty acids content and their ratio in breast and thigh muscles. First feed additive consisted of narasin, nicarbasin and salinomycin sodium, and other five additives were of phytogenic origin. In vivo experiment was realized on the poultry experimental station with deep litter breeding system. A total of 300 one-day-old hybrid chickens Cobb 500 divided into six groups were used for the experiment. The experimental period was divided into four phases, i.e. Starter, Grower 1, Grower 2 and Final, according to the application of commercial feed mixture of soy cereal type. Additive substances used in feed mixtures were different for each group. Basic feed mixtures were equal for all groups. Fatty acid profile of breast and thigh muscles was measured by the method of FT IR Nicolet 6700. Investigated additive substances in the feed mixtures did not have statistically significant effect on fatty acid content and omega-6/omega-3 polyunsaturated fatty acid (PUFA) ratio in breast and thigh muscles. Strong statistically significant relation between omega-6 PUFAs and total PUFAs were proved by experiment. A relation between omega-3 PUFAs and total PUFAs was found only in the group with Biocitro additive.     

解析电除尘烟温与粉尘特性的最佳结合点

分析了电除尘烟温对粉尘特性的影响,以及烟温对电除尘器效率的影响,从中找出烟温调节与粉尘特性的最佳结合点。利用烟温调节的理念,应用余热利用节能电除尘技术对电除尘器进行提效改造,通过实例证明,这既可扩大电除尘器适应性和提高电除尘效率、满足低排放要求,又可节省电煤消耗和降低电耗,具有环保与经济的双重效益。     

Snowmelt Runoff and Water Yield Along Elevation and Temperature Gradients in California’s Southern Sierra Nevada1

Hunsaker, Carolyn T., Thomas W. Whitaker, and Roger C. Bales, 2012. Snowmelt Runoff and Water Yield Along Elevation and Temperature Gradients in California’s Southern Sierra Nevada. Journal of the American Water Resources Association (JAWRA) 48(4): 667‐678. DOI: 10.1111/j.1752‐1688.2012.00641.x Abstract: Differences in hydrologic response across the rain‐snow transition in the southern Sierra Nevada were studied in eight headwater catchments – the Kings River Experimental Watersheds – using continuous precipitation, snowpack, and streamflow measurements. The annual runoff ratio (discharge divided by precipitation) increased about 0.1 per 300 m of mean catchment elevation over the range 1,800‐2,400 m. Higher‐elevation catchments have lower vegetation density, shallow soils with rapid permeability, and a shorter growing season when compared with those at lower elevations. Average annual temperatures ranged from 6.8°C at 2,400 m to 8.6 at 1,950 m elevation, with annual precipitation being 75‐95% snow at the highest elevations vs. 20‐50% at the lowest. Peak discharge lagged peak snow accumulation on the order of 60 days at the higher elevations and 20 to 30 days at the lower elevations. Snowmelt dominated the daily streamflow cycle over a period of about 30 days in higher elevation catchments, followed by a 15‐day transition to evapotranspiration dominating the daily streamflow cycle. Discharge from lower elevation catchments was rainfall dominated in spring, with the transition to evapotranspiration dominance being less distinct. Climate warming that results in a longer growing season and a shift from snow to rain would result in earlier runoff and a lower runoff ratio.     

Influence factors of multicomponent mixtures containing reactive chemicals and their joint effects

Organic chemicals usually coexist as a mixture in the environment, and the mixture toxicity of organic chemicals has received increased attention. However, research regarding the joint effects of reactive chemicals is lacking. In this study, we examined two kinds of reactive chemicals, cyanogenic toxicants and aldehydes and determined their joint effects on Photobacterium phosphoreum. Three factors were found to influence the joint effects of multicomponent mixtures containing reactive chemicals, including the number of components, the dominating components and the toxic ratios. With an increased number of components, the synergistic or antagonistic effects (interactions) will weaken to the additive effects (non-interactions) if the added component cannot yield a much stronger joint effect with an existing component. Contrarily, the joint effect of the mixture may become stronger instead of weaker if the added components can yield a much stronger joint effect than the existing joint effect of the multicomponent mixture. The components that yield the strongest interactions in their binary mixture can be considered the dominating components. These components contribute more to the interactions of multicomponent mixtures than other components. Moreover, the toxic ratios also influence the joint effects of the mixtures. This study provides an insight into what are the main factors and how they influence the joint effects of multicomponent mixtures containing reactive chemicals, and thus, the findings are beneficial to the study of mixture toxicology.     

Nitrification/denitrification in an intermittent aeration process for swine wastewater

Abstract

Nitrogen removal by a methane fermentation plus activated sludge process with the intermittent aeration was presented based upon a full‐scale pig farm experiment. Swine wastewater had a T‐N/BOD ratio from 0.2–0.29. The BOD concentration input to the process ranged from 1050–1608 mg l^‐1 and the T‐N concentration from 273–350 mg l^‐1. More than 90% of organic carbon was removed in each experimental run. Only small concentrations of NO₃‐N were found in the effluent and higher than 60% of the T‐N and 73% of NH₄‐N which were loaded to the intermittent aeration tank was removed. The nitrogen balance of each run was calculated. Denitrification was estimated to be accountable for 45–90% of the T‐N removed in the intermittent aeration tank. Denitrification rate increased as the BOD concentration increased (> 1300 mg l^‐1). The T‐N removal percentage was a function of the T‐N/BOD ratio of the influent. Although higher DO concentration (> 3 mg l^‐1) did not enhance the denitrification rate, nitrification did maintain at relative higher rates at a lower DO concentration (ave. 1.5 mg l^‐1). An operational condition of intermittent interval of aeration/nonaeration at 1:1 hr is better than that of the condition at 3:1 hr. As a result, T‐N and NH4‐N were removed up to 30% and 40% respectively, and the denitrification rate reached 79% in the intermittent aeration tank. An experimental run in a pilot plant on treating anaerobically pretreated swine wastewater was observed to verify simultaneous nitrification/denitrification. The results of the full‐scale plant experimentation seem to be confirmed by those obtained from the pilot plant runs.     

复合人工湿地去除生活污水中的有机物和氮

为提高人工湿地对生活污水的处理能力,对传统的单一垂直流湿地进行改进和优化。采用2个垂直流人工湿地串联,并在好氧湿地内增加曝气供氧,使好氧湿地内溶解氧保持在2～2.5 mg/L范围内,而后增加出水回流。结果表明,增加曝气显著提高了出水的COD、NH3-N去除率,但TN去除效果仍不达标;当随着回流比的增加,NH3-N的去除率略有提高,而后趋于稳定,TN去除率提高显著,但回流比过大时,TN去除率则有所下降。     

鼓泡式反应器高径比对氨法烟气脱碳性能的影响

以N2和CO2混合气模拟燃烧烟气,研究了鼓泡反应器的高径比以及反应条件对氨法烟气脱碳性能的影响。实验结果表明:在相同高径比的条件下,CO2吸收率随氨水质量分数的增加、反应温度的升高而逐渐增大,随进气CO2体积分数和模拟烟气流量的增加而逐渐减小;CO2吸收率随高径比的增加而增大,在高径比为3.98、氨水质量分数为28%、进气CO2体积分数为10%、模拟烟气流量为1.0L/min、反应温度为40℃的条件下,CO2吸收率最高可达100%。     

接种比对餐厨垃圾干式厌氧发酵启动的影响

针对不同接种比对餐厨垃圾干式厌氧发酵启动的影响,对比分析了VS接种比分别为0.36和0.90两种情况下,餐厨垃圾干式厌氧发酵启动过程中pH、NH4-N、COD、VFA、甲烷含量等指标的变化。实验结果表明,启动初期2组样品pH分别快速降至4.74和5.68,均呈酸化状态,经碱液调整后,接种比为0.36的处理仍无法正常产气,接种比为0.90的处理,pH逐步提高,系统正常运行,经72 d的发酵实验,COD去除率达90.29%,甲烷含量高于60%的沼气产量达255.4 L,分析可见,VS接种比是干式厌氧发酵处理的重要参数;此外,与传统湿式厌氧发酵处理相比,餐厨垃圾干式厌氧发酵在较高的VFA和氨氮浓度下,仍能正常运行,采用干式厌氧发酵技术处理餐厨垃圾是可行的。