Experimental study of humidity influence on triboelectric charging of particle-laden duct flows

Electrostatic charge on powders arises during pneumatic transport due to particle–particle and particle–surface interactions via triboelectrification. This is a potential threat to the safety of industrial production and the source of numerous fires and dust explosions in the past. Triboelectric charges are affected by environmental conditions, such as ambient temperature and relative humidity. In this work, we experimentally investigated the influence of ambient humidity on the particle charge of gas–solid flows in a square-shaped duct. Monodisperse PMMA particles are fed into a fully developed airflow in a PMMA duct and then pass through a metallic duct section. The charge of particles is measured at the outlet of the metallic duct via a Faraday cup. By measuring the electrostatic charge under various environmental conditions, we observed that the electrostatic charge first increases with the humidity and then decreases when the humidity becomes higher.     

Short-term inhalation exposure evaluations of airborne antibiotic resistance genes in environments

Antibiotic resistance is a sword of Damocles that hangs over humans. In regards to airborne antibiotic resistance genes (AARGs), critical knowledge gaps still exist in the identification of hotspots and quantification of exposure levels in different environments. Here, we have studied the profiles of AARGs, mobile genetic elements (MGEs) and bacterial communities in various atmospheric environments by high throughput qPCR and 16S rRNA gene sequencing. We propose a new AARGs exposure dose calculation that uses short-term inhalation (STI). Swine farms and hospitals were high-risk areas where AARGs standardised abundance was more abundant than suburbs and urban areas. Additionally, resistance gene abundance in swine farm worker sputum was higher than that in healthy individuals in other environments. The correlation between AARGs with MGEs and bacteria was strong in suburbs but weak in livestock farms and hospitals. STI exposure analysis revealed that occupational intake of AARGs (via PM₁₀) in swine farms and hospitals were 110 and 29 times higher than in suburbs, were 1.5 × 10⁴, 5.6 × 10⁴ and 5.1 × 10² copies, i.e., 61.9%, 75.1% and 10.7% of the overall daily inhalation intake, respectively. Our study comprehensively compares environmental differences in AARGs to identify high-risk areas, and forwardly proposes the STI exposure dose of AARGs to guide risk assessment.     

The role of humic substances in chromium sorption onto natural organic matter (peat)

To elucidate mechanisms of Cr³⁺ sorption onto the unaltered solid natural organic matter, the comparative studies of this ion binding from a solution at pH 4.0 onto three selected particle size fractions: 2000–1000 μm, 630–200 μm and 63–20 μm of markedly different HS content and structure, separated by a wet sieving from an overall sample of peat (Brushwood Peat Humus) were carried out. Comparable patterns of COOH groups and CEC_t confirmed that for cation exchange capacity were responsible mainly cations connected with COO⁻ functional groups. It was though found that aliphatic acids in the solid state did not take part in Cr³⁺ binding, thus the finest studied fraction 63–20 μm of the highest contents of functional groups showed the lowest sorption capacity for Cr³⁺, while similar patterns of sorbed Cr³⁺, soluble HS content and base CEC₀ indicated that these parameters were directly interrelated. The base ion exchange processes determined by CEC₀ (with Ca²⁺ as a predominant exchangeable cation) appeared to be not the major mechanisms responsible for Cr³⁺ sorption. For this metal, strong binding to insoluble large molecular weight organic pool two- to threefold prevailed over the ion exchange processes. Very low acid desorption indicated generally low mobility of Cr³⁺-organic compounds.     

Formation and growth of indoor air aerosol particles as a result of d-limonene oxidation

Oxidation of d-limonene, which is a common monoterpene, can lead to new aerosol particle formation in indoor environments. Thus, products containing d-limonene, such as citrus fruits, air refresheners, household cleaning agents, and waxes, can act as indoor air aerosol particle sources. We released d-limonene into the room air by peeling oranges and measured the concentration of aerosol particles of three different size ranges. In addition, we measured the concentration of d-limonene, the oxidant, and the concentration of ozone, the oxidizing gas. Based on the measurements we calculated the growth rate of the small aerosol particles, which were 3–10 nm in diameter, to be about , and the losses of the aerosol particles that were due to the coagulation and condensation processes. From these, we further approximated the concentration of the condensable vapour and its source rate and then calculated the formation rate of the small aerosol particles. For the final result, we calculated the nucleation rate and the maximum number of molecules in a critical cluster. The nucleation rate was in the order of and the number of molecules in a critical-sized cluster became 1.2. The results were in agreement with the activation theory.     

Importance of incorporation of personal communication devices in evacuation simulators

The importance of the incorporation of personal communication devices in emergency evacuation simulators will be discussed. Four case studies are examined to identify usage statistics and human behavior when using the devices in an emergency. The case studies are: 9/11 World Trade Center Attacks, London train bombings, Virginia Tech shooting and United Flight #93. The case studies’ findings are implemented into the Vacate evacuation simulator, which uses particle swarm optimization to mimic human pedestrian behavior. The physical actions of using a device, as well as the reaction to the information transmitted during usage, are examined. Findings show that the effects of the personal communication devices can affect individuals that are close to the user of the device, as well as those not in the local vicinity of the user. These effects, combined with the rapid mainstream acceptance of communication technologies, justify the implementation of personal communication devices into evacuation simulators.     

Theoretical equation of gas desorption of particle coal under the non-uniform pressure condition and its analytical solution

Based on the second Fick’s law, the theoretical equation of gas desorption of particle coal under the non-uniform pressure condition was developed in this paper. The analytical solution of the theoretical equation and the method of gas desorption quantity of particle coal under non-uniform pressure condition were obtained.     

Numerical simulation of far-field blast loads arising from large TNT equivalent explosives

Large TNT equivalent explosions usually arise from accidents occurring during the transportation, storage, and manufacturing of chemicals relevant to process industries. The blast wave generated by the explosion will spread and interact with the surrounding factories and storehouses, damaging the building structures within several kilometers and causing significant casualties and property losses. This study aims to develop an efficient numerical simulation method to predict blast loads to estimate the consequences of accidents involving far-field free air bursts or surface burst explosions. Before its interaction with the interested target, a blast wave is generated in the numerical model by specifying the initial and boundary conditions of the disturbed air. Based on empirical data of incident overpressure, an explicit formula to calculate the air particle velocity is derived from the governing equations of a perfect inviscid gas. A simplified path line method is proposed to calculate the air density. The proposed method is applied to the LS-DYNA CESE solver to simulate the blast loads on building structures in the far field. Validations against empirical data and experiments indicate that the proposed method is sufficiently accurate for engineering applications and, through a case study, presents a more efficient performance than the LOAD_BLAST_ENHANCED (LBE) and mapping methods.     

Evaluation of the spontaneous combustion characteristics of coal of different metamorphic degrees based on a temperature-programmed oil bath experimental system

Research on the micro- and macrocharacteristics of different metamorphic degrees of coal helps improve the control and protection techniques used during spontaneous combustion. Nine coals with different properties were thoroughly investigated in this study. Fourier transform infrared spectroscopy and a self-designed temperature-programmed oil bath experimental system were adopted to analyze the molecular structure and macrocharacteristic parameters of the spontaneous combustion of coal. Additionally, the influence of particle size on spontaneous combustion was considered. Various functional groups were employed as microcharacteristic parameters to capture the principal active groups in oxidation. The gas production rate, oxygen consumption rate, gas concentration, heat energy release rate, and characteristic temperatures were evaluated as macrocharacteristic parameters to investigate the changes in coal during oxidation. The results establish that the microcharacteristics of coal molecules determine the degree of spontaneous combustion based on intrinsic properties and that changes in the macrocharacteristics of the spontaneous combustion of coal reflect the microstructural changes. The contents of the hydroxyl groups, carbonyl groups, alkyl ether and aryl ether in the coal molecules gradually decrease with the metamorphic increase. Oxygen-containing functional groups have higher reactivities and easily react with oxygen, causing the macroparameters, such as the oxygen consumption rate, the gas generation rate and the heat energy release rate, to consistently decrease with the increase of the metamorphic degree. Small-particle-size coal molecules have more active aliphatic hydrocarbons, oxygen-containing functional groups and a larger specific surface area, increasing the chances of adsorbing the oxygen of active groups and promoting the reaction between coal and oxygen. The experimental results indicate that coal samples with higher metamorphic degrees or larger sizes exhibit lower tendencies toward spontaneous combustion. Evaluation of the spontaneous combustion of coal based on a temperature-programmed oil bath experimental system is of great practical importance for preventing the spontaneous combustion of coal during storage, processing and utilization and can serve as a convenient reference for production safety in mining applications.     

沈阳市烟囱分布对大气污染的影响

本文介绍采用航空遥感技术和实地调查研究相结合的方法,分析了沈阳市烟囱数量、高度、密度以及高、中、低架烟囱的分布状况和特点,同时与大气污染监测结果对照分析了沈阳市煤烟型大气污染的规律及特点,研究了沈阳市烟囱分布对大气污染的影响。最后,提出了沈阳市燃煤污染的防治途径。     

Geochemical evidence of pollutants from coalfired generating stations in late Pleistocene palaeosols in the Dalijia Shan,northwestern China

Surface palaeosols in two tills and a diamicton from an area in northwestern China were analysed for geochemical pollutants. Elevated levels of Br, As and Sb indicate that pollution from coal-burning and/or coal-fired electricity generating stations is delivered by aeolian transport into palaeosols dating from the last glaciation. Because the climate in the field area is sub-humid (precipitation <760 mm) the relative movement of soluble elements in palaeosols dating from early and late stades of the last glaciation is not expected to be high. The glacial and aeolian parent materials of the palaeosols indicate differences that are probably related to their source areas and to the incorporation of geochemical pollutants.