Effects of humic acid on residual Al control in drinking water treatment plants with orthophosphate addition

This study aimed to investigate the effects of humic acid (HA) on residual Al control in drinking water facilities that used orthophosphate addition. The results showed that adding orthophosphate was an effective method for residual Al control for the raw water without HA. When orthophosphate was added at 1.0 min before the addition of poly aluminum chloride (PACl), the concentrations of soluble aluminum (Sol-Al) and total aluminum (Tot-Al) residue were 0.08 and 0.086 mg·L^-1, respectively; both were reduced by 46% compared with the control experiment. The presence of HA would notably increase the residual Al concentration. For the raw water with 5 mg·L^-1 of HA, the concentrations of Sol-Al and Tot-Al increased from 0.136 and 0.174 mg·L^-1 to 0.172 and 0.272 mg·L^-1, respectively. For water with a HA concentration above 5 mg·L^-1, orthophosphate was ineffective in the control of residual Al, though there were still parts of orthophosphate were removed in coagulation. The amounts of Al removal were positively correlated with the solids freshly formed in coagulation. Similar to the raw water without HA, the best Al control was obtained with orthophosphate salt added at 1.0 min before PACl. HA concentrations in the raw water, solution pH, and the orthophosphate dosage suitable for residual Al control by orthophosphate precipitation were also investigated.     

油墨含能NiCr桥电爆换能规律及间隙点火性能研究

目的 针对低功耗换能元点火能力不足的问题,采用油墨直写技术制备一种油墨含能NiCr桥换能元。方法 以Al/CuO为主体含能材料,完成含能油墨的制备,并将其集成到NiCr桥上,形成油墨含能NiCr桥。对油墨含能NiCr桥换能元进行电爆实验和间隙点火实验,验证油墨含能NiCr桥的非接触式点火能力。结果 在24 V/100μF条件下,油墨装药量为2.9 mg时,油墨含能NiCr桥可以在5 mm间隙下点燃B/KNO₃装药,在间隙为1 mm条件下,油墨含能NiCr桥能够成功引发装药为硝酸肼镍的雷管。结论 含能油墨的引入能够增强Ni Cr桥的点火起爆能力,有望在工程实践中进行应用。     

混凝过程中铝盐水解聚合反应平衡的流体动力学控制

为了明确混凝过程中搅拌剪切等动力学因素对铝盐水解聚合反应平衡的影响,采用配制模拟水样作为混凝水系,用Ferron逐时络合比色法对水解产物形态进行表征,并将获取结果与用去离子水组成的纯净水系获取的结果进行对比分析.同时,研究了模拟混凝水系中搅拌剪切条件对铝盐水解反应产物形态分布的影响,考查了铝盐的碱化度和模拟混凝水系的pH值对混凝体系中搅拌剪切条件作用于铝盐水解产物形态分布的影响,并提出了体系搅拌剪切条件影响混凝水系中铝盐水解反应平衡的作用机理.结果表明,混凝过程中的铝盐水解产物形态分布明显受到体系搅拌剪切条件的影响,并且随着混凝水系中铝盐水解程度的增大和转化率的提高,铝盐的水解产物形态分布受到反应体系中搅拌剪切条件的影响加大.     

引起红土表层硅铝比值增大原因的可能性探讨

Si/Al或SiO2 /R2 O3 常常作为表生化学风化作用强度的重要指标。随着化学风化作用的进行 ,硅铝比或硅铝铁率表现出逐渐降低的演化趋势。中国南方的红土风化壳 ,是强烈化学风化作用的产物 ,被认为处于或经历了脱硅富铝化阶段。但是在红土剖面上部常常出现该比值不降反升的现象 ,给运用这一指标指示化学风化强度带来了困难。通过对贵州平坝、新蒲及花溪碳酸盐岩红色风化壳化学风化程度的研究 ,以及对中国南方几种不同结晶母岩上发育的红土的化学风化强度指标的对比讨论 ,探讨了产生这种现象的可能性原因。指出Fe、Al氧化物的下渗和淋失作用及其硅质的相对富集是引起中国南方红土表层出现Si/Al和SiO2 /R2 O3升高的主要原因。