Evaluation of multiple reactions in dilute benzoyl peroxide concentrations with additives using calorimetric technology

Benzoyl peroxide (BPO) is a typical organic peroxide widely used in food processing, particularly flour bleaching. Due to the unstable nature of the oxygen-oxygen bond in BPO, it readily reacts under even mid-low-temperature conditions. Lower concentrations of BPO are also potentially explosive, even when combined with acid or alkaline additives. Given the history of both potential and documented industrial accidents, this study investigates the thermal stability of various BPO concentrations when mixed with acid or alkaline solutions. In addition, differential and integral kinetic models were applied to verify that the apparent activation energy data from the differential scanning calorimetry experiments were valid. The results of autocatalysis reactions and nth-order reaction simulations presented characteristics consistent with the experimental findings. The findings in this paper can be used as a reference for BPO products that are mediated with either an acid or an alkaline solution during production, storage, transportation, or use.     

电镀污泥脱水稳定剂制备及应用研究

针对电镀污泥脱水过程中金属离子大量溶出带来的处理难题,以四甲基乙二胺、二硫化碳为主要原料,以氢氧化钾为引发剂,采用聚合法制备了一种脱水稳定剂,并考察了稳定剂投加量、污泥pH值、反应温度和反应时间对电镀污泥离心脱水时重金属溶出的影响。结果表明,在稳定剂投加量(稳定剂与污泥的质量比)为1%、反应温度为20℃、pH=1、反应时间为30 min、转速为3 000 r/min条件下对含Ni(Ⅱ)电镀污泥离心脱水后,Ni(Ⅱ)脱水稳定率达96.88%,且脱水稳定剂对混合电镀污泥中Ni(Ⅱ)、Cu(Ⅱ)的选择性大于Zn(Ⅱ)。脱水稳定剂的脱水稳定机理是其中的二硫代氨基甲酸盐与重金属离子M(Ⅱ)(Ni(Ⅱ)、Cu(Ⅱ)、Zn(Ⅱ)等)形成配位键,从而形成稳定的交联网状结构,达到化学稳定,实现了离心脱水极少重金属离子溶出(即脱水稳定)的效果。所合成的脱水稳定剂可广泛用于含镍、铜、锌等金属离子的电镀污泥脱水处理。     

复合菌系RXS中木质纤维素降解酶类分析

复合菌系RXS能分泌多种木质纤维素降解酶,为探究这些酶在木薯渣降解中的作用,对RXS的培养时间、酶作用的温度和pH值,以及添加金属离子对酶活性和降解效果的影响进行了研究。结果表明,在培养48 h后,木聚糖酶(Xylanase)、滤纸酶(FPAase)和内切葡聚糖酶(CMCase)酶活性均达到最大值(分别为56.02 U/m L、3.14U/m L和6.78 U/m L),pH=6.0(FPAase和Xylanase的最适pH值)、温度为55℃(FPAase和CMCase酶活性最高)条件下,RXS酶液处理可使木薯渣的失重率达到18.78%,纤维素和半纤维素质量分数分别由31.46%和20.19%下降到22.12%和12.23%。添加Cu~(2+)有效地抑制了酶液中FPAase和Xylanase的酶活性,木薯渣几乎不降解,纤维素和半纤维素组分质量分数基本不发生变化;分别添加Co~(2+)和Zn~(2+)时,对3种酶均有一定程度的抑制,木薯渣失重率仅为3.29%和4.70%;分别添加Fe~(2+)、Mg~(2+)时,FPAase酶活性被抑制,Xylanase与CMCase共同降解底物,木薯渣失重率分别达12.77%和15.81%,纤维素和半纤维素质量分数明显降低。研究表明,Xylanase与CMCase是复合菌系中降解木薯渣的关键酶,其协同作用可使木薯渣有效降解。     

平果岩溶型铝土矿区苔藓多样性及对金属污染的监测指示

以广西平果岩溶型铝土矿区苔藓为研究对象,采集苔藓样品140份。采用经典形态分类法,发现苔藓属于13科25属44种,其中藓类10科22属41种,苔类3科3属3种,其中丛藓科(Pottiaceae)石灰藓属(Hydrogonium)疣叶石灰藓(Hydrogonium gangeticum)为主要优势种。丰富度指数从大到小的样地依次为原矿区、矿区农田、矿石堆、开采区、香蕉地、浓缩池、废矿区,Shannon-Wiener指数从大到小的样地依次为原矿区、矿区农田、矿石堆、浓缩池、香蕉地、开采区、废矿区。利用ICP-OES测定了该矿区土壤和苔藓的Al、Fe、Mn、Mg和Cr质量比,其中土壤Al质量比从大到小的样地依次为废矿区、浓缩池、矿石堆、原矿区、开采区、矿区农田、香蕉地,苔藓Al质量比从大到小的样地依次为开采区、废矿区、浓缩池、矿石堆、原矿区、矿区农田、香蕉地。冗余分析(RDA)表明,细叶石灰藓(Hydrogonium gracilentum)、疣叶石灰藓(Hydrogonium gangeticum)和卷叶毛口藓(Trichostomum involutum)对Al有一定耐受作用;相关性分析表明,丰富度指数与ShannonWiener指数呈极显著正相关(p0.01),丰富度指数与苔藓Al质量比呈极显著负相关(p0.01),土壤Al与苔藓Al质量比、苔藓Al与苔藓Fe质量比呈显著正相关(p0.05)。研究表明,苔藓可作为该矿区金属污染的监测指示植物。     

安溪铁观音茶园土壤重金属赋存形态及生态风险评价

用改进的BCR连续提取法提取安溪铁观音茶园土壤中重金属元素(Li、Fe、Zn、Ba、Sr、Ti、Co、Cr、Cd、Mn、Ni、Pb、V、Mg、Cu)的赋存形态,分析其生物有效性并作出生态风险评价。重金属赋存形态研究结果表明,Cd的形态总体分布为弱酸溶态残渣态可还原态可氧化态,Pb的形态总体分布为可还原态可氧化态弱酸溶态残渣态,Cu的形态总体分布为可还原态可氧化态残渣态弱酸溶态,其余重金属皆以残渣态为主。生物有效性分析结果表明,Pb、Cd、Cu、Mn、Ni、Sr等重金属的潜在生物可利用性较高,其所占百分比分别为90.4%、73.0%、36.6%、32.8%、23.8%、22.9%。对茶园土壤中的重金属作生态风险评价,地累积指数法和潜在生态危害指数法结果均表明,大部分土壤样品是清洁安全的,部分土壤受到Cd元素污染,污染程度达到中度污染级别。     

一维碳纳米管与金属氧化物材料研究

一维纳米结构是最吸引人的功能材料而被广泛关注.一维形态可以很容易地提高纳米结构的独特性能,使它们适合各种各样的应用程序,包括气体传感器、电致变色的设备、发光二极管、场发射器、超级电容器和纳米发电机.因此,目前已合成多种一维纳米结构形式的纳米棒、纳米线、纳米管、纳米带等.本文主要介绍了一维碳纳米管与金属氧化物的性质与研究现状,探讨两种材料的优缺点以期进行互补修饰合成新型复合材料.     

伊犁河谷典型区域土壤重金属含量状况及评价研究

"十二五"期间自治区加大了对伊犁河谷境内典型生态环境区域集中式饮用水源地土壤、农田、果园、菜地以及昭苏、特克斯和新源三大天然草场土壤汞(Hg)、镉(Cd)、铅(Pb)、砷(As)、铜(Cu)、铬(Cr)、镍(Ni)、锌(Zn)八种重金属元素的监测,通过对上述监测数据的统计分析和评价表明:伊犁河谷典型区域土壤重金属含量均低于《土壤环境质量标准》(GB 15618-1995)(二级、旱地)限值,整体处于清洁安全水平,尚未受到人为显著影响.     

Experimental investigation of adsorption capacity of anthill in the removal of heavy metals from aqueous solution

In the present work, the adsorption capacity of anthill was investigated as a low‐cost adsorbent to remove the heavy metal ions, lead (II) ion (Pb²⁺), and zinc (II) ion (Zn²⁺) from an aqueous solution. The equilibrium adsorption isotherms of the heavy metal ions were investigated under batch process. For the study we examined the effect of the solution's pH and the initial cations concentrations on the adsorption process under a fixed contact time and temperature. The anthill sample was characterized using a scanning electron microscope (SEM), X‐ray fluorescence (XRF), and Fourier transform infrared (FTIR) techniques. From the SEM analysis, structural change in the adsorbent was a result of heavy metals adsorption. Based on the XRF analysis, the main composition of the anthill sample was silica (SiO₂), alumina (Al₂O₃), and zirconia (ZrO₂). The change in the peaks of the spectra before and after adsorption indicated that there was active participation of surface functional groups during the adsorption process. The experimental data obtained were analyzed using 2‐ and 3‐parameter isotherm models. The isotherm data fitted very well to the 3‐parameter Radke–Prausnitz model. It was noted that Pb²⁺ and Zn²⁺ can be effectively removed from aqueous solution using anthill as an adsorbent.     

云南省铅冶炼重金属类危险废物产排污系数研究

针对云南省的铅冶炼行业企业的原料、工艺、企业规模和固体废物的产生及处置情况进行全面调研,并选取代表性企业分析工艺及产排污环节.重点研究铅冶炼企业重金属类危险废物产生规律,借助物料衡算、实测法核算和经验估值等方法分析计算,获取中铅冶炼行业生产过程重金属类危险废物的产生和排放系数.本研究获取危险废物产排污系数可用于排污申报登记、排污收费、核定许可排污量、环境影响评价、标准制定、清洁生产审计等工作,为云南省危险废物环境管理提供理论参考.     

Bi2O3-TiO2复合光催化剂协同处理铬-邻苯二甲酸酯复合污染

以硝酸铋和钛酸丁酯为前驱体,采用水热法制备了Bi_2O_3-TiO_2复合半导体材料,并利用X射线衍射(XRD)、紫外-可见吸收光谱(UVVis)、能谱分析(EDS)、X射线光电子能谱(XPS)等手段对复合材料的结构进行了表征.同时,考察了Bi_2O_3-TiO_2复合材料对重金属Cr(Ⅵ)和难降解邻苯二甲酸二丁酯(DBP)复合污染的处理性能,并探讨了复合催化剂协同处理复合污染的作用机制.结果表明:该复合催化剂在可见光下能同时降低重金属Cr(Ⅵ)和有机物DBP的浓度,抑制电子和空穴复合,表现出比对单一Cr(Ⅵ)及DBP污染物更高的处理效率.当Bi_2O_3含量为4%时,复合催化剂表现出最佳的光催化活性.